Westland Lynx Projects

hesham

ACCESS: USAP
Senior Member
Joined
26 May 2006
Messages
32,486
Reaction score
11,575
Hi,

Lynx HT.3:proposed training version for the Royal Air Force, not built.


Lynx ACH:proposed Advanced Compound Helicopter technology demonstrator, partly funded by the Ministry of Defence. Announced in May 1998, the ACH was planned to be powered by RTM322 engines with variable area exhaust nozzles and a gearbox from the Westland 30-200, have wings attached at cabin roof level and BERP rotor blades. It was predicted to fly approximately 50% faster than a standard Lynx.


AgustaWestland AW159 Lynx Wildcat:a development of the Super Lynx with two LHTEC CTS800 engines; previously known as the Future Lynx.


Westland-606:14-seat civil version of Lynx.


http://en.wikipedia.org/wiki/Westland_Lynx
http://en.wikipedia.org/wiki/AgustaWestland_AW159
http://www.flightglobal.com/pdfarchive/view/1973/1973 - 2372.html
http://www.flightglobal.com/pdfarchive/view/1982/1982 - 0986.html
 

Attachments

  • AugustaWestland_AW159_model.jpg
    AugustaWestland_AW159_model.jpg
    28.9 KB · Views: 1,901
  • Lynx  1.JPG
    Lynx 1.JPG
    50.9 KB · Views: 1,380
  • Lynx  2.JPG
    Lynx 2.JPG
    14.4 KB · Views: 1,381
Last edited:
Also Lynx 3, with uprated Gems, WG.30 (your 'Lynx 2' pic above is WG.30) tailboom/rotor, BERP blades and cabin stretch, IIRC. One flown 1984. See

http://helicoptermuseum.co.uk/westland.htm

http://www.airliners.net/search/photo.search?regsearch=ZE477

Any pictures of the Lynx ACH?
 
There are a number of gunships here:
http://www.secretprojects.co.uk/forum/index.php/topic,2212.0/highlight,lynx+gunship.html
 
Airlife's Helicopters and Rotorcraft lists the Westland 606 as having a P&W PT6-34 turboshaft option too.
 
Artist's impression of GKN Westland Lynx advanced compound helicopter (ACH) technology demonstrator from 1998.

The aircraft would have been equipped with wings and a modified Rolls-Royce Turboméca RTM322 engines to demonstrate lift and thrust compounding.

Target requirements for the ACH included speeds of around 250kt (460km/h), operating altitudes of over 20,000ft (6,100m), lift-to-drag improvements of 25-50%, propulsive efficiency increases of up to 50%, payload/range improvements of 20% and life-cycle cost reductions of 10-20%. The demonstrator was expected to be about 50% faster than a standard Lynx.

The helicopter would be fitted with wings equipped with trailing-edge flaps to vary lift compounding. A moving tailplane would trim the pitching moment created by the flaps and a trimming rudder would offload the tail rotor at high speed. The main rotor would use Westland's BERP blade, which complements the compound concept by retaining its efficiency to higher speeds

To provide the higher power required, the demonstrator would have its R-R Gem engines replaced with two RTM322 turboshafts driving an uprated gearbox developed for the defunct Westland 30-200 helicopter. Excess power would be converted to jet thrust by variable-area nozzles. Adjusting throttle setting and nozzle area would provide a range of thrust and shaft power combinations to vary thrust compounding.

Source:
http://www.flightglobal.com/news/articles/westland-prepares-compound-helicopter-demonstrator-37545/
 

Attachments

  • LynxCompound.gif
    LynxCompound.gif
    101.1 KB · Views: 1,027
The curved rotor proposal is different, do you know of any further information on the study?

Cheers, Joe
 
My dear TsrJoe;

here is the whole article,but only in Germany language,if you can translate it,you
will gain a more Info.
 

Attachments

  • Luftfahrt-International-1980-12-12.png
    Luftfahrt-International-1980-12-12.png
    768.4 KB · Views: 157
  • Luftfahrt-International-1980-12-13.png
    Luftfahrt-International-1980-12-13.png
    849.8 KB · Views: 167
many thanks, i'l give one of my German students a little tasking ;)
 
So, not easy to read at that size.

I've got the article in front of me. I don't read German but it's pretty clear it's a article based on a NASA patent for acoustically swept rotors:

https://www.google.co.nz/patents/US4168939

It even says so.

There is nothing to suggest the Lynx model was anything more than a modified off the shelf plastic kit to illustrate the concept. No evidence it's a Westland project.
 

Attachments

  • US4168939-16.png
    US4168939-16.png
    136.6 KB · Views: 152
My dear Paul,

I divide each one into two pieces.
 

Attachments

  • 1.png
    1.png
    220.6 KB · Views: 128
  • 2.png
    2.png
    294 KB · Views: 123
  • 3.png
    3.png
    425.2 KB · Views: 116
  • 4.png
    4.png
    306.6 KB · Views: 189
The aim of that rotor shape was to reduce the "blade slap noise", to be achieved by
using crescent shaped rotor blades.
And yes, as the text suggests, the model of the Lynx was just chosen by either the author of
that article or the editors "to give an idea, what such a rotor would look like" .
 
Why would NASA choose a foreign Helo for the test, the US must have the widest choice of helicopters from domestic production?
 
JohnR said:
Why would NASA choose a foreign Helo for the test, the US must have the widest choice of helicopters from domestic production?

Good question,but NASA did it many times before.
 
The NASA report has no mention of specific types. The Lynx is a model made for the magazine, nothing more.
 
Related to the Westland Lynx ACH demonstrator, I found this patent from December 1992. Interestingly this appears to have a pusher propeller: http://www.google.co.in/patents/US5174523

Apparently Westland also looked at a compound version of the Merlin.
 
hesham said:
JohnR said:
Why would NASA choose a foreign Helo for the test, the US must have the widest choice of helicopters from domestic production?

Good question,but NASA did it many times before.

https://rotorcraft.arc.nasa.gov/Research/Programs/lynx.html
 
As to contemporary Westland compounds, I would say the Merlin proposal looks better but doesn't appear to have the thrust addition talked about for the Lynx.
 

Attachments

  • merlin-aew.jpg
    merlin-aew.jpg
    63.7 KB · Views: 377
The Merlin guys were after greater altitude & endurance, not speed. I seem to remember that a Hurricane wing was the model. That sounds so daft, I must be wrong.
 
From L+K 12/1976,


Lynx with special inflatable floats
during the emergency landing test
water surface
 

Attachments

  • 1.png
    1.png
    93 KB · Views: 195
AW189s already have shaped rotor tips, so perhaps BERP blades are old hat?

aw189.png

Chris
 
Also Lynx 3, with uprated Gems, WG.30 (your 'Lynx 2' pic above is WG.30) tailboom/rotor, BERP blades and cabin stretch, IIRC. One flown 1984. See

According to Flight, May 1982, the Lynx 3 was designed to compete to the German PAH.2 requirement.

In the same issue is a proposal for Naval WG30 for Sweden with dipping sonar, undernose radar, beam-mounted weapons, reinforced undercarriage and haul-down gear.
 

Attachments

  • Flight_1982_1437.jpeg
    Flight_1982_1437.jpeg
    542.2 KB · Views: 88
Some photos of the Westland Lynx prototypes, taken from:


All image credits go to their respective owners. This thread was genuinely a goldmine.
 

Attachments

  • 11756626443_09c5f55a65_b.jpg
    11756626443_09c5f55a65_b.jpg
    57.4 KB · Views: 60
  • 11756625443_849429c1b2_b.jpg
    11756625443_849429c1b2_b.jpg
    61.9 KB · Views: 46
  • 11757048476_11f1879754_c.jpg
    11757048476_11f1879754_c.jpg
    133.1 KB · Views: 44
  • 11756509513_2fe13c0cb2_c.jpg
    11756509513_2fe13c0cb2_c.jpg
    146.9 KB · Views: 46
  • 11705703955_9eea213f3e_c.jpg
    11705703955_9eea213f3e_c.jpg
    103.2 KB · Views: 46
  • 11757797296_fa87726a48_c.jpg
    11757797296_fa87726a48_c.jpg
    105.9 KB · Views: 44
Some more photos of weapons testbeds:

1) Lynx with HOT (XX907)

2) Lynx with Hawkswing (XW839)

In addition, there is:

3) ZT800, which serves as the SuperLynx 300 prototype

4) ZB500, served as an engine testbed for the T800

Sourced from:

Does anyone have any more information about these specific aircraft? Especially in regards to their test careers.
 

Attachments

  • 11757254466_2a5cf76047_b.jpg
    11757254466_2a5cf76047_b.jpg
    43.1 KB · Views: 55
  • 11757482584_e833d99a64_c.jpg
    11757482584_e833d99a64_c.jpg
    110.6 KB · Views: 57
  • 11757153104_4a10010093_c.jpg
    11757153104_4a10010093_c.jpg
    52.4 KB · Views: 67
  • 11756971023_12a1ebc006_b.jpg
    11756971023_12a1ebc006_b.jpg
    95.1 KB · Views: 77
Lynx AH.5 (Interim), an AH.1 with uprated engines and gearbox. Three AH.5 (Interim) were produced, as well as two AH.5. The variant was ultimately dropped in favour of the AH.7, which was essentially an improved AH.5. The helicopters then became used as test vehicles, with at least one being used to trial an EO turret under the nose, as pictured in Chris Gibson's "The General Staff and the Helicopter".
 

Attachments

  • Lynx AH.5.png
    Lynx AH.5.png
    1.1 MB · Views: 60
Does anyone have any information on the variant proposed for the RAN's FFGs? Australia ordered the S.71 Seahawk instead IIRC.
 
No idea to why - though its clearly a Lynx HAS.2 so implies some kind of maritime use.

As to the missile, it must be an early mock-up as it doesn't look like the final ALARM design. I would guess the date at maybe 1983-84, shortly after the contract award to BAe and that would probably tie up with the naval Lynx as being a post-Falklands concept.
 

Similar threads

Back
Top Bottom