Great brief:
Boeing’s chief test pilot for Air Force programs, Dan “Dragon” Draeger, reported that the aircraft has been flown to its highest speed and has proved its fuel-flow system in inverted flight. It has exceeded its threshold angle-of-attack requirement of 20 degrees, and also its objective target of 25 degrees. It meets requirements of both instantaneous and sustained turn rates, and has been demonstrated at loads above the threshold figure of 6.5 g as it approaches the objective of 7.5 g. It is also “very well-behaved in a crosswind environment,” reported Draeger.

 
Youtube Video: Scaled Composites / Northrop Swift jet trainer, first flight - T-38 replacement for T-X competition
View: https://youtu.be/hLqfdcS5Z3k

Code:
https://youtu.be/hLqfdcS5Z3k
If this video has been posted before, please let me know, so I can delete or move this post.
 
Last edited:
Wow finally, years later we really can understand the planform that all the side shots failed to convey. Interesting they ditched the trapezoidal wing for a more general swept wing.
 
Wow finally, years later we really can understand the planform that all the side shots failed to convey. Interesting they ditched the trapezoidal wing for a more general swept wing.

It looks almost a tailed delta. The trailing edge of the wing seems slightly swept along the inner portion and very nearly straight (or possibly very slightly forward swept) at the outer portion.
 

Attachments

  • N400 wing capture.PNG
    N400 wing capture.PNG
    340.3 KB · Views: 93
It has a small LERX so clearly it's going to have vortex lift at least in the inner portion of the wing but outside of that it's more functionally a general swept wing. I guess technically it's really a compound wing.

The increase in span, aspect ratio and chord compared to the trapezoidal N-156 family is prob in focus to subsonic performance and foregoing the necessity of an afterburner for ACM. Can lighten the structure too but it's one less thing you can train pilots on using.
 
What would be a trapezoidal wing with outboard extensions? :rolleyes:
...
Tu Donnes ta langue au Dak ? ;)
D28%20%281%29.jpg
 
Last edited:
Boeing's virtual kiosk for Tailhook includes a pic of the T-7 in Navy colors, and a brochure about their development process that shows both Aggressor and Light Attack configurations. Aggressor gets tip rails for AAMs or ACMI pods plus a centerline pylon. Light Attack adds four underwing hardpoints as well.
 

Attachments

  • T7.pdf
    2.1 MB · Views: 131
  • T7_Infographic.pdf
    599.5 KB · Views: 118
View: https://www.youtube.com/watch?v=tSGX1NAc6ZE


 
View: https://www.youtube.com/watch?v=tSGX1NAc6ZE



Well, that's the dumbest idea in designations in quite a while. And there have been plenty of contenders.

Everything is designed digitally before it is physically built these days. This change just adds confusion with no value at all.
 
The change is integrated simulation with all "classic" CAE collapsed in a box; a model that you can also fly, test for maintenance, use to train pilot or develop safety procedures with the last design update.

If you are a trained CAD engineer (among the few that can go beyond conceptual things under a CAD software), you'll know that there is next to no CAE without iterations. IMOHO this is the fundamental difference here.
 
Well, that's the dumbest idea in designations in quite a while. And there have been plenty of contenders.

Everything is designed digitally before it is physically built these days. This change just adds confusion with no value at all.

Because sadly designations are now marketing tools like everything else.
Presumably this would clash with the current capital 'E' prefix for special electronic installation. Maybe that's what they meant by a 'digital century series' after all? They were all 100-series numbers, these will all be 'e' numbers.
 
I had always thought the USAF to be more savvy about marketing than any of the other services. This seems an Army thing to do. Rather surprised to see this level of nincompoopery on their part.

Honestly I seriously doubt there will be any more excitement at flying a eF-2035 than a F-2035. Of course I am a "boomer" so I have no appreciation for this sort of thing.
 
TLDR: Argentine FA-50 deal somehow didn't get UK export clearance for the BAE-built subsystems. Odd that.

 
TLDR: Argentine FA-50 deal somehow didn't get UK export clearance for the BAE-built subsystems. Odd that.

Why odd?
I think it's sarcasm and relates to the Falkland Islands.
It was sarcasm. I honestly couldn’t read that from the original comment, and by the way that’s not being sarcastic.
 
TLDR: Argentine FA-50 deal somehow didn't get UK export clearance for the BAE-built subsystems. Odd that.

Why odd?
I think it's sarcasm and relates to the Falkland Islands.
It flows out of the Falklands, but that's not actually the immediate point. The UK has a current arms embargo on Argentina, and everyone involved with the deal knew that. It had as much chance of success as trying to sell FA-50s to Iran without the US invoking its arms embargo on the US-sourced parts.
 
And thus Argentine extremely antiquated Mirage IIIs still have no replacement... :rolleyes:
 
Even though Argentina was initially against Russian/Chinese gear, such moves might eventually push them towards russian/chinese stuff simply because there are no other routes.
 
You certainly have a point. Not sure about their air worthiness, as you said. Didn't France sold a whole lot of SEM to Argentina some years ago ?
 
You certainly have a point. Not sure about their air worthiness, as you said. Didn't France sold a whole lot of SEM to Argentina some years ago ?

Only if five is "a whole lot."

 
Sell?!! At 12M€ the lot of 5 (fully operational), it's a gift
See the Great aircraft Bazaar thread
5 Super Etendard for 12.55M€ (5 Super Etendards, along with a simulator, eight spare engines, and a large batch of spares and tooling including barracuda jammer) - 3 directly put into service, 2 used as spare to regenerate airframe already in service
 
Last edited:
As written extensively in the mentioned thread (sorry for that), 2 airframe are to be used for spare for the ones they have already and 3 are to be put immediately in service. Simulator is included in the deal hence. .. Alas, no Training for the French industry.
 
Last edited:
Spin off question, carbon panels and sections, recycled, how?
 
As written extensively in the mentioned thread (sorry for that), 2 airframe are to be used for spare for the ones they have already and 3 are to be put immediately in service. Simulator is included in the deal hence. .. Alas, no Training for the French industry.

Who do you think will run that simulator? Who do you think will train the operators and maintainers? There are going to be French techreps there as long as the planes are in service.
 
As written extensively in the mentioned thread (sorry for that), 2 airframe are to be used for spare for the ones they have already and 3 are to be put immediately in service. Simulator is included in the deal hence. .. Alas, no Training for the French industry.

Who do you think will run that simulator? Who do you think will train the operators and maintainers? There are going to be French techreps there as long as the planes are in service.
It's possible. But after 40 years of Etendard flying, they might not need to burden the budget for expensive expats...

For example, Latin America countries have flown their Sabre, T-33 or T-37 without US personnel for years.
 

Similar threads

Please donate to support the forum.

Back
Top Bottom