SNCAN (Nord Aviation) and Nord-SFECMAS Projects

hesham

ACCESS: USAP
Senior Member
Joined
26 May 2006
Messages
32,498
Reaction score
11,587
Nord-1800 was a project of bomber.
 
Last edited:
And the NORD 1150 was a design powered by 3 Marboré engines., I gratefully
got a scan of the Fana article mentioning it by Tophe.
 

Attachments

  • Nord_1150.JPG
    Nord_1150.JPG
    347.4 KB · Views: 1,478
first the SNCAN types (although we are severly leaving the "secret" region ! ;D )
 

Attachments

  • N1110.GIF
    N1110.GIF
    20.3 KB · Views: 1,156
  • N1202.GIF
    N1202.GIF
    19.1 KB · Views: 1,101
Hi,

Nord N-1480.

Nord N.1110 :was experimental N.1101 fitteed with Turbomeca
Astazou turboprop engine.

Nord N.1202 :was N.1201 fitted with 160 hp Potez 4DO1 engine.

And most of us know the Nord N.2500 to N.2510 variants and projects
,for example the N.2510 was ASW project version.The more interesting
the N.2520 project had 5m increased in length and 7 tonnes add to
the weight.

The Nord N.2600 was twin engined high wing 40-passenger
transport project,powered by 350 1b Rolls-Roryce Dart
turboprop engines,estimated speed was 295 mph.
 

Attachments

  • N.2600.JPG
    N.2600.JPG
    12.2 KB · Views: 1,168
hesham said:
My dear Jemiba,

Do you have a more info about the Nord N.3500 civil/military transport aircraft projects ?.

Sorry for the Nord 3500, I drew a blank, but I really would like to see it ;D

For Brochet aircraft there's a very good site here:
http://avions.brochet.free.fr/
The MB.130 is shown in model form, I just can see one engine,
but at least it's a twin-boom a/c.
 
Hi,

I spoke about this bomber before,the Nord N.1800A B6 was six
seat piston engines heavy bomber,the N.1800B was a trubo-
prop version and the N.1800C was a jet bomber version (ATAR).
Has anyone a drawing to it ?.
 
My understanding is, that the N.1800 A, B and C weren't just versions with
different engines, but really different designs. The first design got the suffix "A",
when it already was cancelled, because another, bigger design was submitted,
which later gave way to the "C" design with ATAR jet engines.
 
Hi all
and the nord 2200 from "aviation magazine"
 

Attachments

  • n 2200.jpg
    n 2200.jpg
    548.3 KB · Views: 370
From Le FANA 436,


here is the Model of N.1600 project,and N.1601 of 1946,as a Model and 3-view,
also the final design to N.1601 of 1950.
 

Attachments

  • 1601  of 1950 3-view.JPG
    1601 of 1950 3-view.JPG
    31.3 KB · Views: 309
  • 1601  of 1946 3-view.JPG
    1601 of 1946 3-view.JPG
    33.2 KB · Views: 302
  • 1601  of 1946 model.JPG
    1601 of 1946 model.JPG
    23.2 KB · Views: 264
  • 1600.JPG
    1600.JPG
    32 KB · Views: 266
Jemiba said:
And the NORD 1150 was a design powered by 3 Marboré engines., I gratefully
got a scan of the Fana article mentioning it by Tophe.


Also from Le FANA 436,


the details of Nord N.1150 executive jet aircraft project.
 

Attachments

  • 1150.JPG
    1150.JPG
    77.4 KB · Views: 300
Very nice. You've been posting a lot from Le Fana these past three weeks... Did you scan a collection? It's really nice, but I hope we won't get into trouble with Editions Larivière... :-\
 
The model of the 1600 (with T-tail) is shown in Cunys "Les Aviosn De Combat Francais", too,
with the additional clue, that then still Rateau jet engines with larger diameter were considered.
 
hesham said:
From Le FANA 436,


here is the Model of N.1600 project,and N.1601 of 1946,as a Model and 3-view,
also the final design to N.1601 of 1950.

Do you know if there were advanced, non-experimental versions of N.1601 design, which of course had never been built? Some websites say about an all-weather version...

Piotr
 
Maybe the N.1620, which is mentioned by Cuny ? Made a 3-view quite a while ago, using an
artist impression and description:
(artist impression from Jean Cuny, Docavia N°30)
 

Attachments

  • N-1620.jpg
    N-1620.jpg
    63.4 KB · Views: 1,044
  • N-1620.gif
    N-1620.gif
    82.7 KB · Views: 1,073
Stargazer2006 said:
Very nice. You've been posting a lot from Le Fana these past three weeks... Did you scan a collection? It's really nice, but I hope we won't get into trouble with Editions Larivière... :-\


That's a big advertising for them,as I did with Flight International. :D
 
hesham said:
That's a big advertising for them,as I did with Flight International. :D

Though you may think along those lines, remember there are some publishers who definitely do not see it that way. Think of the constant hassle on this forum with anything published by the Ian Allan Group for instance (which includes Midland, Classic, Airlife and so forth)...
 
And we keep on never display a materials from their new books.
 
Jemiba said:
Maybe the N.1620, which is mentioned by Cuny ? Made a 3-view quite a while ago, using an
artist impression and description:
(artist impression from Jean Cuny, Docavia N°30)

It seems quite intriguing that Nord 1601 had swept wings and its 'derivative', conceived as an operational aircraft, was to have strainght wings. Was Nord 1620 indeed a developed version of Nord 1601?

By the way the article from "Le Fana de'l Aviation" No. 436 contains single piece of information on Nord 1620: its 'total' weight was to be 14,850 kg (while that of Nord 1601 was only 5,992 kg). So it would suggest that Nord 1620 was to be significantly heavier and bigger that Nord 1601.

Piotr
 
I would regard the N.1601 rather as an aerodynamic testbed, than a prototype
of a service version, comparing weights may be a bit misleading. And about chosing
a straight wing may have had , it may be a similar case, as the Douglas F3D Skyknight,
where a straight wing was used, too.
 
Hi,


we spoke before about Nord N.2520 which developed from N.2500,but does anyone
hear about Nord N.2580 ?.
 
No. Maybe a typo of N.2508, the version with auxiliary jet engines at the wing tips ?
Where is this designation mentioned ?
 
Jemiba said:
No. Maybe a typo of N.2508, the version with auxiliary jet engines at the wing tips ?
Where is this designation mentioned ?


May be that's right my dear Jemiba,


the Jane's All the World's Aircraft 1963-1964 will make us sure.
 

Attachments

  • 1.png
    1.png
    92.4 KB · Views: 638
If you have that volume at hand, perhaps you could check, if on page 47, as given by
the index, really the "N.2580" is mentioned ?
Looking at that list a typo otherwise seems quite natural, I think
 
You don't even NEED to check the original volume to see it's a typo...

Check the page number: the 2508 can be found in exactly the same place in the book as the 2501-2507!!!

A typical example of getting all heated up over absolutely nothing. And typically the kind of blooper that ought to be discarded straight away, given everyone's experience in researching data here for many years in so many books and stuff.
 
Just realised that this scan of an Aviation Magazine cover shows a lovely view of the R2800 installation on the 2508.

http://3.bp.blogspot.com/-pRLUqDAnxgU/UqX08e636KI/AAAAAAAAHdU/WJJ2vJBjYOQ/s1600/Nord+2508+AM+n%C2%B0265.jpg
 
Jemiba said:
Maybe the N.1620, which is mentioned by Cuny ? Made a 3-view quite a while ago, using an
artist impression and description:
(artist impression from Jean Cuny, Docavia N°30)
.......................................................................

N-1620 looks like it was designed by the same (German?) engineers who designed the CF-100 fighter and Jetliner for AVRO of Canada (1950s.)
 
Slightly off topic but:

The Avro Canada design team early post war was mostly British, with a smattering of Canucks and European refugees. The reason designs from this era look similar is because all the designers around the world were reading the same texts and using the same design and analysis tools. The same thing goes on today.
 
Foo Fighter said:
The 2200 appears to be an F-86 clone.

The Nord 2200 was one of the three naval fighter competitors - for a PA-28 Clemenceau (not the one we knew, an earlier one) in 1949. Of the three, it was the better of the lot... in the sense it did not killed any pilot and had good flight characterstics. Except it was way too heavy for its Nene and its climb rate was abysmal.
The two competitors were
- Arsenal VG-90, two build, two crashed, Decroo and Dellys killed
- NC-1080 (Centre) one build, one crashed, Pierre Gallay killed.

Overall, a disaster. And the PA-28 was not even build ! A total waste of money and pilots.

https://www.google.com/search?q=%22Nord+2200%22&client=firefox-b-ab&source=lnms&tbm=isch&sa=X&ved=0ahUKEwij3Pqop6TdAhWNzYUKHee5A34Q_AUICigB&biw=1680&bih=936

Sans+titre+1.jpg


What was left of the Nord 2200 until recently. Unfortunately the wreck was beyond repair or restoration and was scrapped.

ob_1b09bb_nord-2200-3.jpg
 
From Aviation Francaise 1947,

here is an artist drawing to early Nord N-2200 concept,so weird ?!.
 

Attachments

  • 1.png
    1.png
    1,016.8 KB · Views: 188
  • 2.png
    2.png
    879.4 KB · Views: 180
Last edited:
From Aviation magazine 1953,

here is a good Info about Nord N-3000 jet airliner Project,in two variants;

Under the designation of Nord-3000, S.N.C.A.N. presented two Projects. The first concerns an airplane
with three S.N.E.C.M.A. Jets Atar or Rolls-Royce Avon, airfoil low, soaring. The two reactors lateral
are drowned in the wing, but,unlike the Bréguet solution,they are moved away from the fuselage and
located inside the resistant box of sails. The position of the rear reactor has not yet been determined.
He can be placed either above the fuselage, either in this one. The air intakes of the side reactors,
provided in the leading edge, cross the front spar, while that the exhaust nozzles pass through the rear
spar.

The external breakdowns of the sails are in box construction, while the central part is made up of two
beams crossing the fuselage. The two trains main consist of two simple diabolos. retractable in the
fuselage, behind the wing.

The second Project from the Nord concerns a low-wing, arrowless monoplane, the four double-flow
Jets of which are arranged in two pods glued under the lower surface.
 

Attachments

  • Nord-3000.png
    Nord-3000.png
    349.1 KB · Views: 117
  • Nord.png
    Nord.png
    87.5 KB · Views: 88
Last edited:
From Aviation magazine 1954,

here is a small Info about Nord N.2520,which developed from N.2501.
 

Attachments

  • 2520.png
    2520.png
    225 KB · Views: 85
From Aviation magazine 1954,

here is all Info about Nord N.3100 Project.
 

Attachments

  • 3100-1.png
    3100-1.png
    345 KB · Views: 85
  • 3100-2.png
    3100-2.png
    192.8 KB · Views: 152
From Aviation magazine 1969,

here is a Nord N.400,I know dear Caravellarella send it before,but where ?.
 

Attachments

  • 400.png
    400.png
    447.9 KB · Views: 184
Hi! My poor understanding for Nord Gerfaut.
What is Aladin radar?
 

Attachments

  • Gerfaut.jpg
    Gerfaut.jpg
    127.4 KB · Views: 172
Last edited:
Thank you for your wonderful contributions as always. My brilliant Just-san!!:)
 

Attachments

  • Nord_AS.30_ASM_and_AA20_AAM(Nord_5103).jpg
    Nord_AS.30_ASM_and_AA20_AAM(Nord_5103).jpg
    80.9 KB · Views: 182
Vortex generator!!
Without a vortex generator, the airflow could separate here, creating turbulence and increasing resistance.
The designer tried to improve the efficiency of the engine by arranging the air intake to the engine exhaust in a straight line and shortening the fuselage length, but the fuselage became a cramped shape.
 
Last edited:

Similar threads

Back
Top Bottom