Blohm und Voss Ae M 41

kiradog

ACCESS: Confidential
Joined
3 February 2008
Messages
77
Reaction score
35
I have some microfilm from the NASM archives that shows an unknown Blohm und Voss Project.

The drawings are labeled Ae M 41.

Can anyone shed some light on this project?

Gary Webster
 

Attachments

  • 2433_351.jpg
    2433_351.jpg
    140.7 KB · Views: 639
  • 2433_352.jpg
    2433_352.jpg
    176.7 KB · Views: 607
  • 2433_355.jpg
    2433_355.jpg
    155.9 KB · Views: 538
  • 2433_354.jpg
    2433_354.jpg
    126.1 KB · Views: 501
:) Nothing to add ,but a big " THANK YOU " It's a scoop !!!!
 
Hi Gary,

nice to know from you again. You might remember me, some years ago I sent you some copies of Kiryll von Gersdorff`s book on german helicopters. Welcome.

Carlos Henriques
 
Wow! What a find! I am unable to read any of the dimensions, any chance of posting clearer or larger images?

Any idea what the engine is? The Cowling looks very long, as does the spinner suggesting a contra prop?
 
Nick,

I'll post a closer file with the dimensions more readable in a few days.

The associated document is virtually unreadable. The microfilm is out of focus and I can not make out anything readable.

Carlos, good to hear from you again.

Gary
 
Here is a cleaner version with measurements.

Documents are dated 1944.

Gary Webster
 

Attachments

  • 2433_351.jpg
    2433_351.jpg
    300.6 KB · Views: 530
Hi guys,

the spinner does sugest contrarotating propellers, but the estimated cowling measurements imply a radial engine with no more than two rows. It could be a 14 cylinder ( BMW 801/804/805 family ), a 18 cylinder ( BMW802 ) or the enigmatic Argus Ar403 radial , either P5 or P9 variants. Bye.
 
Hi Kiradog,


I saw something like that in NASA report from while,but to be honest,I don't find the name of
Blohm and Voss on it.
 
In the upper left corner of the drawings key you can see the Blohm & Voss logo,
so, assuming it's authentic, there's no question, I think.
 

Attachments

  • B&V.jpg
    B&V.jpg
    30.4 KB · Views: 102
  • blohm-voss-logo.jpg
    blohm-voss-logo.jpg
    8.2 KB · Views: 290
Jemiba said:
In the upper left corner of the drawings key you can see the Blohm & Voss logo,
so, assuming it's authentic, there's no question, I think.


My dear Jemiba,


I speak about the NASA report,the drawing is different,and no signal on it.
 
Then, perhaps you should post those drawings, so we can discuss, if it actually is
the same aircraft ? ;)
As it's a design with variable geometry, it's understandable, that it was interesting for
NASA, so it may well have been pictured in other reports.
 
Sorry my dear Jemiba,


I saw a report in NASA site from long time ago,but unfortunately I didn't keep it,I think it was
just a hypothetical model.
 
News like this give sense to my life!
Two questions:
1- Is the "Ae" prefix related to any known company or designer? I don't remember, actually. :-\
2- Would be interesting to translate exactly the notes. I can guess that one reads "front suspension" (landing gear attachment point, maybe?) and the second could be related to the centre of gravity or pressure of the wing. Both have three slightly shifted position for three different wing layout (+ and - swept and straight). Hardly understandable how the sweepback wing's root would be attached to the front fuselage.

Thank you very much.
 
kiradog said:
Here is a cleaner version with measurements.

Documents are dated 1944.

Gary Webster


Translation of this text, from leftmost block to right


Front suspension


Computed center of lift for 0.221b and 0.22t(?) flight for the 3 in one plane


Rear suspension
 
The draftsman obviously made an insertion/correction to the caption about the center of lift,
actually writing to sentences, using the beginning for both.
 

Attachments

  • translation.jpg
    translation.jpg
    150.9 KB · Views: 205

Similar threads

Back
Top Bottom