Probably, but rather unlikely to the point of getting one to study themselves.
Though, to be fair, as number of them in Russian hands grows, it's now quite likely PRC and DPRK will get some.
Not likely to really get much out of that. I mean, those were just M1A1s, no fancy armor. About the only thing they might get out of it is the ballistic computer.
Not likely to really get much out of that. I mean, those were just M1A1s, no fancy armor. About the only thing they might get out of it is the ballistic computer.
Worth noting that both DPRK and PRC made their new gen MBTs from pirated t-72 solutions.
While it's unlikely PRC will get all that much from 40-years old platform anymore, North Korea only relatively recently managed to catch up to world-level MBTs. They probably can find many solutions interesting.
Worth noting that both DPRK and PRC made their new gen MBTs from pirated t-72 solutions.
While it's unlikely PRC will get all that much from 40-years old platform anymore, North Korea only relatively recently managed to catch up to world-level MBTs. They probably can find many solutions interesting.
I have to say, i didn't thought of this possibility, but who knows, maybe the DPRK contingent in Russia might have some indigenous weapons system with it (Pyoljji-3 SAM, maybe some AFVs, possibly SRBMs?), so there could be a remote chance to see them in the parade. I don't recall seeing anything to hint at that from the parade rehearsal videos to date though.
Some tanks havent installed the twin missle launcher. The tank look, a mix of an Altay with T-14, specialy when you look the version without the launcher.
Livining aside if it goo or not, I like it visualy.
After doing some numbers to confirm it, I think that the gun probably is 115 mm (question I've had for a while). That would make the Songun-915 the only DPRK tank with a 125 (if it has the auto-loader is unconfirmed as far as I know).
After collecting the best images available, the ratio muzzle diameter / bore diameter (pic 1), I'm omitting the ± error, but the Soviet numbers are considerably more accurate: Korean:
Sogun-ho: 1.36 (1.39, 1.38, 1.36, 1.35, 1.34)
Cheonma 2: 1.44 (1.41, 1.47, 1.45, 1.45, 1.43, 1.43) Soviet:
115 mm - 1.44
125 mm - 1.38 - 1.39 (the 2A46M has slightly thicker walls than the 2A46)
Even if Soviets abandoned (no modernization besides projectiles) the 115 mm has a relatively large chamber volume (10.2 L against 12.7 L of the 125 mm and 10.4 L of the Rh-120) and low chamber pressure compared to the 125 mm 2A46s (360 MPa against 510-650 MPa).The gunpowder of the U-5TS restricted by the low chamber pressure of a 1950s design seems to be the reason why the 115 mm has "low" muzzle energy (7.3 MJ), with 4.25 kJ/g is considerably lower than the 5.35 kJ/g of the 125 mm that Soviets began to use a decade after (at a considerable cost to the barrel's lifespan).
Edit (2): The kJ/g are a simplified calc and with a wrong assumption (that's why I cross them out). The muzzle energy estimates in the table below are simple extrapolations of the reported values for 3BM-6 (U-5TS), 3VBM17/42 Mango (2A46M).
And North Koreans seem to have increased the chamber volume by ~20%, this is more a guess based on that blurred pic (trying to estimate the profile from that censored pic. I am much less certain about the accuracy of this)
I don't know if they were trolling or that extra long barrel is a real prototype or variant, I included assuming that they simply made the barrel longer after the bore extractor (as M????)
The summary would be: they (may) have modernized the metallurgy of the U-5TS for their new tank instead of using the 125 mm with a new cartridge and chamber. The estimation for the new 115:
115
115(K) - estimated
125 (2A46M)
Chamber volume
10.2 L
12.2 L
12.7 L
Chamber pressure
360 MPa
(similar to the 125)
650 MPa
Propellant charge
7.4 kg
8.1 (extrap. 125) - 8.9 kg (extrap. 115)
8.4 kg
Muzzle energy
7.1 MJ
9.5 - 11.0 MJ
10.2 - 11.6 MJ
The drawings (pic 2) should be accurate enough are based on photos (best available and corrected by distortion, perspective, etc) and considerably better than similar drawings that are incomplete or contain inconsistencies.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.