Some 3D print models

[youROKer]

A little time ago, I started making models of rare military vehicles for 3D printing for myself and my friends. Mostly these are tanks, on a scale of 1 to 100, but there is also a little aviation.

Currently done:
1. RAH-66 for scales 1 to 285 and 1 to 144
2. Object 490 - a project of a Soviet tank from the early 80s on a scale of 1 to 100
3. Object 279 - the well-known Soviet four-track tank on a scale of 1 to 100
4. RDF-LT - export version of the tank with a conventional 76-mm gun
5. FMBT - american tank of the future from 1994
6. BTR-90 - Russian armored personnel carrier from the 90s (not yet printed)

In the near future plans - the M8 AGS tank and perhaps something from aviation in 285 scale.

The files of these models for 3D printing can be found on my Cults page: https://cults3d.com/en/users/yukuzhelev/creations

 

[yasotay]

The level of detail is spectacular!

 

[youROKer]

BTR-90 print model

 

[youROKer]

1. M8 AGS Level II protection
2. M8 AGS Level III protection
3. M8-120
4. M8 Thunderbolt
5. M8 Lightning Bolt

 

[youROKer]

Object 279 AK Strela (Variant 1)

 

[royabulgaf]

That would be fun maneuvering in an urban area.

 

[yasotay]

I have a vision of another tank that goes in front with a giant yoke to hold the barrel.

 

[martinbayer]

Somebody was overcompensating?

 

[youROKer]

M8-120 print model

 

[youROKer]

M8 Lightning Bolt print model

 

[youROKer]

Object 279 with 152-mm rocket launcher

 

[youROKer]

1. Ka-50
2. Ka-50N
3. Ka-50Sh
4. Print model of Ka-50Sh on a scale of 1/144

 

[youROKer]

1. RDF/LT
2. RDF/LT Late

 

[youROKer]

Object 279 with 240-mm rocket launcher

 

[youROKer]

Ka-58 Black Ghost in 1/285 scale.

 

[publiusr]

For the triangle UFO people

Colin Saunders UFO Illustrations | Coast to Coast AM

Guest on the 6/6/23 show, Colin Saunders, shares illustrations and a model he constructed of a triangular UFO.

www.coasttocoastam.com

 

[youROKer]

Object 279 with 240-mm rocket launcher

Printed and painted

 

[youROKer]

Object 781 SP8

 

[youROKer]

Some 1/285 models:
1. V-24 prototype
2. Mi-24A first year of production
3. Mi-24B unrealized variant of Mi-24A modernization
4. Mi-24V Afghan variant
5. Mi-24P Afghan variant
6. Mi-24VM with BKO (airborne defense complex) "President-C"
7. Mi-24 Super Hind III

 

[youROKer]

Printed Mi-24A and Mi-24VM

 

[Sprues]

Fantastic work! Keep it up.

 

[Scott Kenny]

Those are awesome!!!

I see a couple of RAH-66s in my future. Could I request a rescale to 1/100, please? And a Ka-58 Black Ghost in 1/100, too, please?

 

[overscan (PaulMM)]

Printed and painted

These look awesome painted.

 

[youROKer]

Object 781 SP7-1 and Object 781 SP7-2

Those are awesome!!!

I see a couple of RAH-66s in my future. Could I request a rescale to 1/100, please? And a Ka-58 Black Ghost in 1/100, too, please?

With the RAH-66 this can be done in print, no special changes are needed when going from 1/144 scale to 1/100 scale. With Ka-58 it is more complicated. It takes a lot of effort to create a larger scale model and there is little interest in them. Therefore, I will not make a larger version of Ka-58 in the near future.

 

[Scott Kenny]

With the RAH-66 this can be done in print, no special changes are needed when going from 1/144 scale to 1/100 scale.

Okay, time to abuse my favorite 3d printer again!

With Ka-58 it is more complicated. It takes a lot of effort to create a larger scale model and there is little interest in them. Therefore, I will not make a larger version of Ka-58 in the near future.

Understandable.

If you do get enough interest in a larger scale model, please post that here!

Happy modeling!

 

[youROKer]

Ka-60 models in 1/285
1. Ka-60
2. V-60 prototype with NOTAR
3. Ka-60R armed reconnaissance variant for Ka-50 escort

 

[youROKer]

RDF/LT wity unmanned turret and CAT/LCV (Combined Arms Team/Lightweight Combat Vehicle) 1/100 scale

 

[youROKer]

Some 1/285 models:
1. Mi-24A with fenestron and an early version of the armament
2. Mi-24V with tail turret
3. Mi-35MS
4. Mi-24LL (in two variants)
5. Mi-24-28 PrPNK-28 with armament installation
6. Mi-24VT with the installation of a thermal imaging system for forward vision TP SPO-V "Satrap"
7. Mi-24 Super Hind V

 

[publiusr]

Cygnus

U.S.S Cygnus 1/700 scale… a study in insanity

Well, I’ve decided to jump on the grenade and try to tackle the above mentioned subject. This is the Primitive Dave model that was available through Shapeways. For those who followed my failed MPC Cygnus thread, you would know that I had purchased some of the 700 scale parts back when it and the...

www.therpf.com

Others

Traveler j type starships

Just a couple of large scale 28mm space ship models, traveler j types.

www.therpf.com

 

[publiusr]

You can make your own Nostromo

https://www.etsy.com/listing/1781342553/alien-nostromo-ship?etsrc=sdt

The Borg

First Contact Borg Cube- Studio scale-ish... 50CM3

I'll DM you my address to you. ;)

www.therpf.com

 

[youROKer]

Havoc is an attempt to guess what the Mi-28 looks like from Hughes Aircraft's "The Threat" image series.

 

[publiusr]

Helmet

See The Hands-on Details Behind Stunning Helmet Build

[Zibartas] recently created wearable helmets from the game Starfield that look fantastic, and we’re happy to see that he created a video showcasing the whole process of design, manufacture, a…

hackaday.com

Retro screen

Broadcast TV Simulator Keeps The Nostalgia Flowing

Watch out, Gen X-ers — there’s a nostalgia overload heading your way, courtesy of this over-the-air TV simulator. And it has us feeling a little Saturday morning cartoon-ish, or maybe e…

hackaday.com

Want To Help Capture Some Digital Ephemera? Break Out Your VHS Player

Do you live in the UK, have a VCR and capture card, and an interest in Teletext? [James O’Malley] needs your help! Teletext was, for many people around the world, their first experience of an…

hackaday.com

FreeCAD

The End Of Ondsel And Reflecting On The Commercial Prospects For FreeCAD

Within the world of CAD there are the well-known and more niche big commercial players and there are projects like FreeCAD that seek to bring a OSS solution to the CAD world. As with other OSS proj…

hackaday.com