Some 3D print models

[youROKer]

A little time ago, I started making models of rare military vehicles for 3D printing for myself and my friends. Mostly these are tanks, on a scale of 1 to 100, but there is also a little aviation.

Currently done:
1. RAH-66 for scales 1 to 285 and 1 to 144
2. Object 490 - a project of a Soviet tank from the early 80s on a scale of 1 to 100
3. Object 279 - the well-known Soviet four-track tank on a scale of 1 to 100
4. RDF-LT - export version of the tank with a conventional 76-mm gun
5. FMBT - american tank of the future from 1994
6. BTR-90 - Russian armored personnel carrier from the 90s (not yet printed)

In the near future plans - the M8 AGS tank and perhaps something from aviation in 285 scale.

The files of these models for 3D printing can be found on my Cults page: https://cults3d.com/en/users/yukuzhelev/creations

 

[yasotay]

The level of detail is spectacular!

 

[youROKer]

BTR-90 print model

 

[youROKer]

1. M8 AGS Level II protection
2. M8 AGS Level III protection
3. M8-120
4. M8 Thunderbolt
5. M8 Lightning Bolt

 

[youROKer]

Object 279 AK Strela (Variant 1)

 

[royabulgaf]

That would be fun maneuvering in an urban area.

 

[yasotay]

I have a vision of another tank that goes in front with a giant yoke to hold the barrel.

 

[martinbayer]

Somebody was overcompensating?

 

[youROKer]

M8-120 print model

 

[youROKer]

M8 Lightning Bolt print model

 

[youROKer]

Object 279 with 152-mm rocket launcher

 

[youROKer]

1. Ka-50
2. Ka-50N
3. Ka-50Sh
4. Print model of Ka-50Sh on a scale of 1/144

 

[youROKer]

1. RDF/LT
2. RDF/LT Late

 

[youROKer]

Object 279 with 240-mm rocket launcher

 

[youROKer]

Ka-58 Black Ghost in 1/285 scale.

 

[publiusr]

For the triangle UFO people

Colin Saunders UFO Illustrations | Coast to Coast AM

Guest on the 6/6/23 show, Colin Saunders, shares illustrations and a model he constructed of a triangular UFO.

www.coasttocoastam.com

 

[youROKer]

Object 279 with 240-mm rocket launcher

Printed and painted

 

[youROKer]

Object 781 SP8

 

[youROKer]

Some 1/285 models:
1. V-24 prototype
2. Mi-24A first year of production
3. Mi-24B unrealized variant of Mi-24A modernization
4. Mi-24V Afghan variant
5. Mi-24P Afghan variant
6. Mi-24VM with BKO (airborne defense complex) "President-C"
7. Mi-24 Super Hind V

 

[youROKer]

Printed Mi-24A and Mi-24VM

 

[Sprues]

Fantastic work! Keep it up.

 

[Scott Kenny]

Those are awesome!!!

I see a couple of RAH-66s in my future. Could I request a rescale to 1/100, please? And a Ka-58 Black Ghost in 1/100, too, please?

 

[overscan (PaulMM)]

Printed and painted

These look awesome painted.

 

[youROKer]

Object 781 SP7-1 and Object 781 SP7-2

Those are awesome!!!

I see a couple of RAH-66s in my future. Could I request a rescale to 1/100, please? And a Ka-58 Black Ghost in 1/100, too, please?

With the RAH-66 this can be done in print, no special changes are needed when going from 1/144 scale to 1/100 scale. With Ka-58 it is more complicated. It takes a lot of effort to create a larger scale model and there is little interest in them. Therefore, I will not make a larger version of Ka-58 in the near future.

 

[Scott Kenny]

With the RAH-66 this can be done in print, no special changes are needed when going from 1/144 scale to 1/100 scale.

Okay, time to abuse my favorite 3d printer again!

With Ka-58 it is more complicated. It takes a lot of effort to create a larger scale model and there is little interest in them. Therefore, I will not make a larger version of Ka-58 in the near future.

Understandable.

If you do get enough interest in a larger scale model, please post that here!

Happy modeling!

 

[youROKer]

Ka-60 models in 1/285
1. Ka-60
2. V-60 prototype with NOTAR
3. Ka-60R armed reconnaissance variant for Ka-50 escort