AkelaFreedom's Missile and UAV artwork

[AkelaFreedom]

AGML is missile launcher for guided missiles "Brimstone".

Link for 3D model:

Missile Launcher for Brimstone | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[AkelaFreedom]

MUTANT Missile
Project MUTANT is Missile Utility Transformation via Articulated Nose Technology which is being developed by The Air Force Research Laboratory.

Link for 3D model:

MUTANT Missile | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[AkelaFreedom]

"Gambit 2" is a concept of unmanned combat aerial vehicle (UCAV) for air-to-air combat from General Atomics.

Link for 3D model:

Gambit 2 UCAV | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[AkelaFreedom]

"Gambit 1" is a concept of unmanned aerial vehicle (UAV) for Intelligence, Surveillance and Reconnaissance (ISR) from General Atomics.

Link for 3D models:

Gambit 1 UAV | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[AkelaFreedom]

Concept of "Maritime Strike Missile" from Northrop Grumman.

Link for 3D models:

Maritime Strike Missile | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[Trident]

I don't think the intake is accurate, though. What you've modelled as a backward-swept section of the inlet lip is in fact the intersection of the planar exterior sidewall with a DSI bump compression surface:

New Maritime Strike Missile Concept Unveiled By Northrop Grumman

Northrop Grumman's maritime strike missile concept reflects huge demand within the U.S. military for new longer-range and faster-flying weapons.

www.thedrive.com

https://twitter.com/x/status/1643359781070032896

View: https://twitter.com/defence_insider/status/1643359781070032896


Basically, I think the intlet lip has only 3 sections: the forward-swept side walls and an arced cowl in a plane perpendicular to the direction of flight. Compare to the J-20:



Also, the upper intersection between the strake and missile body seems too blended in your model. If you look at the blue bands on the mock-up there is a definite angle between the slope of the body and strake upper surface.

 

[AkelaFreedom]

I don't think the intake is accurate, though. What you've modelled as a backward-swept section of the inlet lip is in fact the intersection of the planar exterior sidewall with a DSI bump compression surface:

View attachment 697247

New Maritime Strike Missile Concept Unveiled By Northrop Grumman

Northrop Grumman's maritime strike missile concept reflects huge demand within the U.S. military for new longer-range and faster-flying weapons.

www.thedrive.com

View attachment 697248

https://twitter.com/x/status/1643359781070032896

View: https://twitter.com/defence_insider/status/1643359781070032896


Basically, I think the intlet lip has only 3 sections: the forward-swept side walls and an arced cowl in a plane perpendicular to the direction of flight. Compare to the J-20:

View attachment 697246

Also, the upper intersection between the strake and missile body seems too blended in your model. If you look at the blue bands on the mock-up there is a definite angle between the slope of the body and strake upper surface.

You are mistaken there is a simple bucket air intake, since the DSI bump is not used for hypersonics

 

[AkelaFreedom]

LRMP is a Long Range Maneuvering Projectile from General Atomics.

Link for 3D models:

Long Range Maneuvering Projectile | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[AkelaFreedom]

Kawasaki Heavy Industry (KHI) concept of Island Defense Anti-ship Missile - Long range, Low RCS.

Link for 3D models:

Kawasaki Anti-ship Missile | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[pedrospe]

Kawasaki Heavy Industry (KHI) concept of Island Defense Anti-ship Missile - Long range, Low RCS.

Link for 3D models:

Kawasaki Anti-ship Missile | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

View attachment 698743

View attachment 698744
View attachment 698745
View attachment 698746

Amazing work

 

[AkelaFreedom]

An improved version of the Type 12 Surface-to-Ship Missile developed by Mitsubishi Heavy Industries.

Link for 3D model:

Type 12 Surface-to-Ship Missile | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[AkelaFreedom]

Tomahawk Block V
Tomahawk Land Attack Missile (TLAM) is a long-range, all-weather, jet-powered, subsonic cruise missile.

Link for 3D model:

Tomahawk Block V | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[Hydroman]

The nose looks like a friendly Beluga whale.

 

[AkelaFreedom]

The nose looks like a friendly Beluga whale.

yes there is a resemblance

 

[AkelaFreedom]

The Joint Strike Missile (JSM) is a multi-role, air-launched cruise missile under development by the Norwegian company Kongsberg Defence & Aerospace and American company Raytheon Missiles & Defense. This missile will be integrated with the Lockheed Martin F-35 Lightning II.
(New version of my previous model)

Link for 3D model:

Joint Strike Missile | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[AkelaFreedom]

Sky Sonic from RAFAEL is a new interceptor missile designed specifically against hypersonic missiles. The Sky Sonic interceptor is two-stage missile system designed to integrate with existing early warning sensors. The first stage will bring the interceptor to the approximate height, whereas the second stage is the kill vehicle.

Link for 3D model:

Sky Sonic Misssile | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[AkelaFreedom]

SkySpear from RAFAEL is a new 6th Generation long-range air to air missile.

Link for 3D model:

SkySpear Missile | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[AkelaFreedom]

Teseo MK2/E is a long range anti-ship missile system with land attack capability from MBDA.

Link for 3D model:

Teseo MK2 Missile | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[AkelaFreedom]

Subsonic Cruise Missile from MBDA
Deep-strike weapon concept from MBDA - low-flying stealthy subsonic standoff missile of more than 1,000 km range and penetrating capability against deeply buried targets.

Link for 3D model:

Subsonic Cruise Missile from MBDA | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[AkelaFreedom]

Supersonic Cruise Missile from MBDA
Deep-strike weapon concept from MBDA - high-supersonic long-range missile. The primary mission would be anti-surface attack, but it could also be used for lethal defense suppression and as an air-to-air weapon against high-value assets such as airborne early warning platforms.

Link for 3D model:

Supersonic Cruise Missile from MBDA | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[AkelaFreedom]

Expendable Heavy Remote Carrier from MBDA
The Expendable Remote Carriers (ERC) are a compact unmanned collaborative combat aircraft, which are being developed with the goal of enabling the next generation air-combat systems to fully operate in highly contested environment.

Link for 3D model:

Expendable Heavy Remote Carrier from MBDA | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[AkelaFreedom]

"Stunner" missile for "David's Sling" system is a missile designed to intercept the newest generation of tactical ballistic missiles at low altitude. Jointly developed by Rafael and Raytheon. The multi-stage interceptor consists of a solid-fuel rocket motor booster, followed by an asymmetrical kill vehicle with advanced steering for super-maneuverability during the kill-stage.

Link for 3D model:

Stunner Missile for Davids Sling | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[AkelaFreedom]

Expendable Heavy Remote Carrier from MBDA v2
The Expendable Remote Carriers (for Naval forces) are a compact unmanned collaborative combat aircraft, which can be launched both from a submarine using a "watertight launched capsule" or from warships using a "Vertical Launching System".

Link for 3D model:

Expendable Heavy Remote Carrier from MBDA v2 | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[AkelaFreedom]

IDAS (Interactive Defence and Attack System for Submarines) is a medium-range missile currently being developed for submarine from Diehl Defence. Primarily targets aerial threats, such as ASW helicopters, but also against small or medium-sized surface vessels or coastal land targets.

Link for 3D model:

IDAS Missile | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[AkelaFreedom]

Light Attack Remote Carrier from Diehl
Light Attack Remote Carrier (LARC) is a compact unmanned collaborative combat aircraft, which are being developed with the goal of enabling the next generation air-combat systems to fully operate in highly contested environment.

Link for 3D model:

Light Attack Remote Carrier from Diehl | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[AkelaFreedom]

Rampage Missile
The Rampage, initially named MARS (Multi-purpose, Air-launched Rocket System), is an air-to-surface missile developed by Israel Military Industries (Elbit Systems now) derived from the EXTRA. It is a standoff weapon designed to hit high-value targets while the launch aircraft remains out of range of air defenses.

Link for 3D model:

Rampage Missile | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[AkelaFreedom]

LongShot from General Atomics.
The LongShot is the DARPA programme aims to develop a UAV that can be carried and launched by fighter or bomber aircraft, allowing them to stay away from enemy threats. It would then proceed to engage the enemy with its own air-to-air missiles.

Link for 3D model:

LongShot from General Atomics | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[pedrospe]

Nice work

 

[yasotay]

Indeed! As always, superlative work.

 

[AkelaFreedom]

"Fury" from Anduril (previously developed by Blue Force Technologies) is a high-performance, multi-mission autonomous air vehicle (AAV).

Link for 3D model:

Fury UCAV | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[AkelaFreedom]

Thanatos Tactical UAV from Kratos.

Link for 3D model:

Thanatos Tactical UAV | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[yasotay]

Always impressed at how fast you can turn a graphic into a 3D model. As always, well done.

 

[AkelaFreedom]

Always impressed at how fast you can turn a graphic into a 3D model. As always, well done.

Yes, thank you, but when I model from just one picture, there is always a chance of making a bunch of inaccuracies

 

[flateric]

...

 

[AkelaFreedom]

...

And what? I will draw from this picture... Again you will give valuable advice

 

[AkelaFreedom]

Tyrfing 3SM
Concept of "SuperSonic Strike Missile (3SM) Tyrfing" from Kongsberg Defence & Aerospace (KDA).

Link for 3D model:

Tyrfing 3SM Missile | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[AkelaFreedom]

Saab FCAS UCAV
Concept from Saab - Future Combat Air System (FCAS) program of Unmanned Supersonic Combat Aircraft.

Link for 3D model:

Saab FCAS UCAV | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[AkelaFreedom]

Lockheed Martin Mako Missile
Multi-Mission Hypersonic Missile from Lockheed Martin. Compatible with the F-35 platform and other modern platforms.

Link for 3D model:

Lockheed Martin Mako Missile | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com

 

[AkelaFreedom]

AN/ALQ-249 Next Generation Jammer Mid-Band (NGJ-MB). As an external carriage AEA capability for the EA-18G Growler, NGJ-MB focuses on the middle frequency bands of the electromagnetic spectrum.

Link for 3D model:

ALQ-249 Next Generation Jammer | 3D model

Model available for download in Autodesk FBX format. Visit CGTrader and browse more than 1 million 3D models, including 3D print and real-time assets

www.cgtrader.com