Levavasseur Fighter Project of 1916 with 360 km/h Speed & His Activities

hesham

hesham

ACCESS: USAP
Senior Member
Joined
26 May 2006
Messages
38,289
Reaction score
20,430
from Tu Magazine;

Mr. Léon Levavasseur was a pioneer of French aviation,he built many airplanes and gliders,and in 1916,he designed a single seat fighter Project,intended to reach a 360 km/h speed,it had a blind fuselage canopy,trolley main landing gear and used a skids for landing.

This machine had a 160 hp engine and a wing square of 10 m2,with a monoplane configuration but never materialized.
 
Last edited:
I'm afraid that the only source that I have on Levasseur, Les Avions de Pierre Levasseur by Michel Ledet and Lucien Morareau (Lela Presse, 2004), does not mention such an aircraft.

The book says only that, during the war, the company produced 1500 propellers of its own design per month and 100 aircraft per month, none of which were of its own design. Instead, it built FBA components, SPADs, Breguet XIVs, and prototypes for other designers.

Among the latter were four examples of the S.A.B fighter (designed by Bernard, Bechareau, Birkigt, and Bleriot) between November 1918 and 1919, at which point S.A.B liquidated. But the S.A.B was a biplane powered by a 300hp Hispano-Suiza V-8 that attained 210 km/h, not a 1916-vintage monplane.

French Aircraft of the First World War (Davilla and Soltan) adds that Levasseur assisted a naval yard in converting a WW1 LVG fuselage into a amphibious flying boat. But that was in 1920 and was also a biplane.
 
Excuse me Iverson,

what was the relationship between Levavasseur and Levasseur ?,they were two designers,
please see;

https://en.wikipedia.org/wiki/L%C3%A9on_Levavasseur
https://en.wikipedia.org/wiki/Pierre_Levasseur_(aircraft_builder)
 
I might add that 360 km/h (~223 mph) would be an extraordinary performance for 1916, especially on only 160 hp.

The only "160-hp" engine that springs to mind is the Gnome 9N Monosoupape rotary. I'm not sure if it was available or in the offing in 1916, though I suppose that it could have been.
 
My mistake. Misread.

I have no sources that report anything for Levavasseur between the Antoinette military monoplane (the Monobloc) of 1911, which had 60-hp and was too heavy to fly, and the safety airplane of 1918, for which he won a prize.
 
It was his dream,and don't forget the configuration,it was also an influential factor
for high speed.
 
Hi,

we know this designer made many aircraft and gliders,and his series Antoinette, began with No.I up to No.XIV,passing with No.XVI racer,also Gastambide-Mengin,Monobloc (Latham Type) and a military monoplane
of 1912.

In 1921,he created with Gastambide another two monoplanes,we have a separated topic for them,and in my files a mystery,called Helcompler,does anyone hear about it ?.
 
Last edited:
hesham said:
In 1921,he created with Gastambide another two monoplanes,we have a separated topic for
them,and in my files a mystery,called Helcompler,does anyone hear about it ?.
Click to expand...
Not a French word and certainly nothing that makes sense. Didn't it occur to you that this was simply a typo for "Helicopter"? (it's the kind that happens frequently when OCR software misreads old newspaper clippings)
 
Levavasseur built the Breguet-Richet gyroplane of 1907.
This might be the source of the confusion.

1760190112548.png

Also, he was the builder of the Antoinette engine that equipped Santos-Dumont's only helicopter attempt in 1906.

1760190308992.png
 
Thank you dear Stargazer for your effort,

and you are right,I wrote it wrong, it was Helicoaeroplane,later Helicoavion and finally
called Stat-Avion,it was to combine the use of a fixed wing and horizontal propellers,
1918-1920
 
Last edited:
iverson said:
I might add that 360 km/h (~223 mph) would be an extraordinary performance for 1916, especially on only 160 hp.

The only "160-hp" engine that springs to mind is the Gnome 9N Monosoupape rotary. I'm not sure if it was available or in the offing in 1916, though I suppose that it could have been.
Click to expand...

Thread necro here, I know ... but Lavavasseur was probably interested in the airframe than he was its engine. By 1909, his 16 litre V16 was producing 100-to-134 hp (although that latter output is suspect). What might such an engine's descendants be capable of by 1916?

BTW: Does anyone known the planned output of Lavavasseur post-Antoinette V20?

-- https://oldmachinepress.com/2016/05/28/antoinette-levavasseur-aircraft-engines/
 
He also had a patent in 1914,and in 1921 he designed an aircraft
for the future,had a five fuselage ?!.
 

Attachments

  • 1.png
    1.png
    322.2 KB · Views: 17
hesham said:
He also had a patent in 1914,and in 1921 he designed an aircraft for the future,had a five fuselage ?!.
Click to expand...
How can we know which designs were from the father and which were from his son? They were both named Léon!
 

Similar threads

Back
Top Bottom