... In my mind if you want to have Project Waler as the Land 400 of the 80s you need to hit the Army over the head with the need for wheeled vehicles on the day the project starts...
But wouldn't that just pushes LAND 112 further back in time? And with the same ultimate outcome - overloaded 8x8 AFVs. An alternative outcome might result if this ATL Project
Waler was split into two classes of vehicles - one wheeled, one tracked. The roles could then be divided between whichever drive systems best-suited.
The wheeled portion of this 'what-if' Project
Waler will invariably choose some form of
Ur-ASLAV. The USMC took delivery of its first amphibious LAV-25s in1983. Earlier adoption of an ASLAV Type I (ASLAV-25) opens the door to active co-development with DDGM-Canada of the ASLAV Type II hulls.
In Canada, DND was having trouble reaching a decision on wheeled APCs (mainly due to then-Col. Roméo Dallaire's fixation on new M113A3s). Had there been a co-development partnership between GM companies in Australia and Canada, DND would have been quicker to adopt what became the
Bison APC and
Coyote recce vehicles ... and the ADF could be fielding its first ASLAVs by the mid-80s.
By the mid-80s, costs for Project
Waler were spiralling. In 1981, AUD 500M had been budgeted for 700 vehicles. By 1984, AUD 638M would be required to acquire 650 vehicles. My idea of two distinct vehicle types could only exacerbate rising costs. As such, I would suggest retaining M113s for some basic support roles along with orders for 250 x 'Wheeled
Walers' and 250 x 'Tracked
Walers'.
Wheels - ASLAV component of Project Waler
I note that the Holden Dandenong Plant was first closed in 1988. Now imagine main assembly of Holden autos being concentrated at Elizabeth, SA, earlier while Dandenong becomes the final assembly point for a GM-Holden Defence Ltd. Below I will list my imaginary LAV II-based ASLAV variants (which, just for fun, I have also assigned Australian mammal names):
Dingo-R; ASLAV-25 (Recce) = LAV-25 analogue with Delco turret
-- Main role: Recce-by-stealth; secondary: DFS & support for ASLAV-S
Dingo-S; ASLAV-S (Surveillance) =
Coyote analogue; Delco turret
-- Main role: Surveillance (MSTAR radar; EO/IR; video; laser rangefinder)
Buffalo-PC; ASLAV-PC (Personnel Carrier) =
Bison APC analogue
Buffalo-C; ASLAV-C (Command) =
Bison CP analogue
Buffalo-A; ASLAV-A (Ambulance) =
Bison Amb analogue
With the quieter and faster-moving roles covered by ASLAV, that leaves us with the tracked component of Project
Waler.
Tracks - Marder/TAM component of Project [/i]Waler[/i]
This is another target of opportunity. I'm aware that the West German
Marder was looked at for the RW Project
Waler. By then, production of the
Marder had ended but the derived Thyssen-Henschel TAM series (later TH 301 and 302) had begun in Argentina. However, due to a faltering Argentive economy, the Córdoba-based AMSE plant was shuttered in 1983.
RW, that shuttered turned out to be temporary. But what if (perhaps, through Thyssen-Henschel) Australia were to purchase TAMSE tooling related to the TAM during that difficult economic time? Rail-shipped to Buenos Aires, the TAMSE equipment could be loaded at Puerto Nuevo for the sea voyage to Oz.
Now Project [/i]Waler[/i] has a second iron in the fire. I am imagining a new Thyssen-Henschel Australia pty (Redbank, QLD?) as prime. The key point here is that, like the RW Project [/i]Waler[/i] but unlike the RW ASLAV, both vehicle types would be built - not just final assembly - in Australia.
The tracked vehicle range would be as follows (and again, just for fun, I've assigned Aussie reptile names to each sub-type).
Dragon-105; ASTAV-105 = TAM analogue; L7A2 main gun
Dragon-57; ASTAV-57 = TAM derivative; 57 mm Bofors gun
- Alternative armament (if anti-armour emph.) 60 mm IMI HVMS
Goanna-IFV; ASTAV-IFV; TAMSE VCTP APC analogue
- Infantry carrier;* 25 mm Delco turret (as per ASLAV-25)
-- * NB: Not an ISC (can only carry 1.5 'bricks' of Section)
Goanna-120; ASTAV-120; VCTM mortar carrier analogue
-
Goanna-120 mortar carrier lacks the IFV's Delco turret
Varanid-CP; ASTAV-CP; VCTP analogue with raised roof
-
Varanid Command Post lacks
Goanna-IFV's turret
Varanid-RV; ASTAV-RV; raised roof ARV Eng vehicle
Skink-DT; ASTAV-DT = TAM analogue driver trainer
I've included the ASTAV-105 TAM analogue for fun. I doubt that the Australian Army perceived of any real need for an IFV-based tank destroyer. And, perhaps, missing in all this is a larger calibre DFS vehicle akin to the Saladin- and Scorpion-turreted M113 conversions?
Okay, I've wading in where I don't really belong! Brick-bats? Return fire?