Lockheed Martin SR-72?

Hi! Perhaps better longitudinal propotion.
Fore fuselage is large. Hypersonic area rule?
Vertical tail stabilizer area is very small. It's a CCV?  
 

Attachments

  • SR-72 PAGE 1.jpg
    SR-72 PAGE 1.jpg
    575.8 KB · Views: 590
  • SR-72 PAGE 2.jpg
    SR-72 PAGE 2.jpg
    633.3 KB · Views: 573
  • sr72_0.jpg
    sr72_0.jpg
    73 KB · Views: 543
  • 14969026644555790452_11n.jpg
    14969026644555790452_11n.jpg
    117.8 KB · Views: 525
SR-72 is a son of Blackbird.
D-21 was a daughter of Blackbird.

http://en.wikipedia.org/wiki/Lockheed_D-21

https://www.youtube.com/watch?v=GMyC2urCl_4

https://www.youtube.com/watch?v=wHuBsBOF4R8
 

Attachments

  • 28-6.jpg
    28-6.jpg
    43.1 KB · Views: 88
  • landis_D-21_On_B-52_2.jpg
    landis_D-21_On_B-52_2.jpg
    44.8 KB · Views: 105
  • 41-2.jpg
    41-2.jpg
    56.1 KB · Views: 106
  • d21b39.jpg
    d21b39.jpg
    12.5 KB · Views: 106
  • d21b38.jpg
    d21b38.jpg
    17.9 KB · Views: 93
Hi! Mach6 scramjet engine.
Fuel of X-51 is JP-7.(Same as SR-72?)
http://en.wikipedia.org/wiki/JP-7
Fuel of X-43 is LH2.

https://www.youtube.com/watch?v=KNasb3-BFP8

https://www.youtube.com/watch?v=VZUwKX3_uE4

https://www.youtube.com/watch?v=6K_rzuSuqIg
 
Hi!
Scramjet Thermal Management
http://www.dtic.mil/get-tr-doc/pdf?AD=ADA593050
 

Attachments

  • How to cool engine by fuel.jpg
    How to cool engine by fuel.jpg
    218.7 KB · Views: 75
  • heat load and heat sink.jpg
    heat load and heat sink.jpg
    198.5 KB · Views: 79
Blackie, please keep on topic.
 
Of course I do so. ;)

https://www.youtube.com/watch?v=pmeQ0T4VyeU
 

Attachments

  • 2015-06-05_2122.png
    2015-06-05_2122.png
    330.1 KB · Views: 81
  • 2015-06-05_2121.png
    2015-06-05_2121.png
    540.1 KB · Views: 85
  • 2015-06-05_2120.png
    2015-06-05_2120.png
    361.6 KB · Views: 77
  • 2015-06-05_2119_001.png
    2015-06-05_2119_001.png
    276.7 KB · Views: 152
  • 2015-06-05_2119.png
    2015-06-05_2119.png
    233.7 KB · Views: 145
  • 2015-06-05_2117.png
    2015-06-05_2117.png
    337.2 KB · Views: 171
  • 2015-06-05_2116.png
    2015-06-05_2116.png
    761.3 KB · Views: 226
  • wyROYfx.png
    wyROYfx.png
    528.8 KB · Views: 222
datafuser said:
A slide by Dr. Mark T. Maybury, USAF Chief Scientist, in April this year shows "Mach 5-6 is where speed alone is sufficient" and Mach 3.5 is where both speed and signature equally contribute to survivability. EADSIM model was used to get this result.

do u have the paper? or PPT something? Thanks very much.
 

Attachments

  • speed.PNG
    speed.PNG
    316.4 KB · Views: 94
coach46 said:
... might realise the SR-72 is not as new as it seems.

Aerojet has shown this aircraft (see picture 1 below) as the TriJet concept (Link here)
in the summer of 2011. The main difference to the SR-72 is the engine, which then consisted of three instead of two components: a turbine, an ejector ramjet and a dual-mode ramjet (see picture 2 and 3).

Perhaps this is the reason why the engine nacelles seem so huge!


No Page Found! do anyone have that article?
i doubt that the pic is so said Trijet concept? it was actually HTV-3X concept。 the picture below is from lockheed website.
 

Attachments

  • d3cc2635-83a8-48ab-a4b8-dd88d8a393d4_Full.jpg
    d3cc2635-83a8-48ab-a4b8-dd88d8a393d4_Full.jpg
    538.7 KB · Views: 84
  • 1426013437843.png
    1426013437843.png
    878.7 KB · Views: 94
blackkite said:
Of course I do so. ;)

NICE!
it is different from what Pop Science show some days ago,espacially the tail cone。
 
liaomh said:
No Page Found! do anyone have that article?
http://aviationweek.com/awin/aerojet-unveils-trijet-reusable-hypersonic-power
 
liaomh said:
coach46 said:
... might realise the SR-72 is not as new as it seems.

Aerojet has shown this aircraft (see picture 1 below) as the TriJet concept (Link here)
in the summer of 2011. The main difference to the SR-72 is the engine, which then consisted of three instead of two components: a turbine, an ejector ramjet and a dual-mode ramjet (see picture 2 and 3).

Perhaps this is the reason why the engine nacelles seem so huge!


No Page Found! do anyone have that article?
i doubt that the pic is so said Trijet concept? it was actually HTV-3X concept。 the picture below is from lockheed website.
What a beauty!!! :eek:
 

Attachments

  • 1426013437843.png
    1426013437843.png
    878.7 KB · Views: 67
flateric said:
liaomh said:
No Page Found! do anyone have that article?
http://aviationweek.com/awin/aerojet-unveils-trijet-reusable-hypersonic-power

Thanks very much.
I found this article before, but there is not the picture there.
can you send me the article you found? liaomh@gmail.com. thanks a lot.
i just want to confirm where does the picture come from actually.
 

Attachments

  • d3cc2635-83a8-48ab-a4b8-dd88d8a393d4_Full.jpg
    d3cc2635-83a8-48ab-a4b8-dd88d8a393d4_Full.jpg
    538.7 KB · Views: 92
DSE said:
Not sure this is the best place for this, but here goes.

R--INDUSTRY CAPABILITY ASSESSMENT OF HYPERSONIC PROPULSION

Solicitation Number: NNC1554918Q
Agency: National Aeronautics and Space Administration
Office: Glenn Research Center
Location: Office of Procurement

Synopsis:
Added: Jun 04, 2015 7:56 am

NASA/GRC is refining its hypersonic portfolio to ensure that it is most effectively aligned to support national priorities to utilize research, computational tools, and experimental capabilities in support of technology and system development as well as flight test in support of national needs. NASA/GRC is issuing two contracts where each will conduct a study on future US hypersonic propulsion capability needs from the hypersonic propulsion industry viewpoint as well as their companys perspective. The initial national needs are primarily defense related and NASA/GRC intends to purchase the services from Aerojet Rocketdyne and Orbital ATK because both of these companies are presently working under DoD hypersonic programs and have the highly specialized knowledge and expertise to effectively and economically provide NASA/GRC with the requested information.

This is not a request for quote. This is a sole source synopsis.

Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact no later than 4:30 p.m. local time on June 12, 2015. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice, is solely within the discretion of the government.

yes, the two companies did the job from Darpa/AF FaCET and MoTr program.
 
blackkite said:
liaomh said:
coach46 said:
... might realise the SR-72 is not as new as it seems.

Aerojet has shown this aircraft (see picture 1 below) as the TriJet concept (Link here)
in the summer of 2011. The main difference to the SR-72 is the engine, which then consisted of three instead of two components: a turbine, an ejector ramjet and a dual-mode ramjet (see picture 2 and 3).

Perhaps this is the reason why the engine nacelles seem so huge!


No Page Found! do anyone have that article?
i doubt that the pic is so said Trijet concept? it was actually HTV-3X concept。 the picture below is from lockheed website.
What a beauty!!! :eek:

so, go get a job from Skunk Work. maybe you still have a chance.... ;D
 
I believe it's time to remove the question mark from after SR-72. It appears to me that it will be built. -SP
 
You believe they will do studies and might issue RFP's, or that it will be built?
 
DSE said:
Steve Pace said:
I believe it's time to remove the question mark from after SR-72. It appears to me that it will be built. -SP

That eventually we'll get to this point I have little doubt. In my lifetime......... ? I'm not betting my 401K.

x2. And it won't be called the SR-72, be built be Lockheed, or be built in the US.
 
You put waaaaaaay too much faith into the Chinese. The same Chinese that had its most modern attack helicopter outsourced to kamov and its most modern transport plane outsourced to Antonov. The same Chinese that made a direct copy of F-22 canopy and put it on a frame that was atleast influenced by ex MiG people.
 
flanker said:
The same Chinese that made a direct copy of F-22 canopy and put it on a frame that was atleast influenced by ex MiG people.

Have wondered about that frame. The canopy is obviously strong enough for the F-22, and just as obviously they snaked the complete design package. I wonder what prompted the addition of the frame.

edit: Just noticed we're talking about two different frames. ;D
 
Hi!
https://www.youtube.com/watch?v=Nn7ggx8U5Qg



Lockheed Martin SR-72
http://www.defenceaviation.com/2013/11/lockheed-martin-sr-72-specification-technical-data.html
Role Unmanned, Stealth, hypersonic, Strategic reconnaissance aircraft
National origin United States
Primary users USAF
Manufacturer Lockheed Martin
First flight 24/11/2028
Introduction 30/12/2030
Status Design proposal
Number built N/A
Program cost Unknown
Unit cost Unknown
Length 100 ft / 30 m
Wingspan 55 ft / 16 m
Height 18 ft / 5 m
Wing area Unknown
Empty weight Unknown
Maximum payload Unknown
Maximum takeoff weight Unknown
Powerplant Two HTV-3X
Fuel
Maximum speed Mach 6.0
Ferry range 2,900 nmi (5,400 km)
Combat radius
Service ceiling
Rate of climb
Thrust/weight
Guns
Air to ground loadout
Hardpoints
 

Attachments

  • ScramJet.jpg
    ScramJet.jpg
    67.9 KB · Views: 881
what reference seriously do these numbers come from???
 
Please don't bring this what-if shit numbers here.
Absolutely no-authority source site.
 
flanker said:
You put waaaaaaay too much faith into the Chinese. The same Chinese that had its most modern attack helicopter outsourced to kamov and its most modern transport plane outsourced to Antonov. The same Chinese that made a direct copy of F-22 canopy and put it on a frame that was atleast influenced by ex MiG people.


And these are the same Chinese that cannot produce a modern hi-performance jet engine to equip their J-20
 
Those "reference" numbers, though!!!
 

Attachments

  • 28325641[1].jpg
    28325641[1].jpg
    110.7 KB · Views: 751
How about these data? Not a bad guess?
Length 100 ft / 30 m
Wingspan 55 ft / 16 m
Height 18 ft / 5 m
 
Thanks a lot. :D

http://www.fantastic-plastic.com/LOCKHEEDSR-72.htm

It's different in all images a little. What image should I believe? :-\
 

Attachments

  • signature72_png38626aa3-fbed-44e7-869f-f958824709a5Original.jpg
    signature72_png38626aa3-fbed-44e7-869f-f958824709a5Original.jpg
    205 KB · Views: 70
  • 1_20131116203431809.jpg
    1_20131116203431809.jpg
    38.5 KB · Views: 61
  • sr-72600.jpg
    sr-72600.jpg
    125.9 KB · Views: 57
  • d3cc2635-83a8-48ab-a4b8-dd88d8a393d4_Full.jpg
    d3cc2635-83a8-48ab-a4b8-dd88d8a393d4_Full.jpg
    538.7 KB · Views: 62
  • sr72_0.jpg
    sr72_0.jpg
    73 KB · Views: 63
  • SR72-2.jpg
    SR72-2.jpg
    91.5 KB · Views: 65
  • ogee wing plan upper.jpg
    ogee wing plan upper.jpg
    62.9 KB · Views: 61
  • SR-72 planform.jpg
    SR-72 planform.jpg
    16.2 KB · Views: 560
  • PLAN VIEW.jpg
    PLAN VIEW.jpg
    27.1 KB · Views: 578
  • SR-72CAD.jpg
    SR-72CAD.jpg
    190.7 KB · Views: 605
blackkite said:
Thanks a lot. :D

http://www.fantastic-plastic.com/LOCKHEEDSR-72.htm

It's different in all images a little. What image should I believe? :-\

This one:
3933968_orig.jpg
 
Excellent! 3 side view please.
And next video. Enjoy!
SR-72 need very long main landing gear which is installed at the wing.
https://www.youtube.com/watch?v=FnqC9hTMC54
 

Attachments

  • 2015-06-12_2159.jpg
    2015-06-12_2159.jpg
    58.5 KB · Views: 68
  • 2015-06-12_2101.jpg
    2015-06-12_2101.jpg
    29.6 KB · Views: 64
  • 2015-06-12_2103.png
    2015-06-12_2103.png
    179.3 KB · Views: 162
  • 2015-06-12_2102.png
    2015-06-12_2102.png
    959 KB · Views: 183
  • 2015-06-12_2100.png
    2015-06-12_2100.png
    481.6 KB · Views: 187
  • 2015-06-12_2059.png
    2015-06-12_2059.png
    344.8 KB · Views: 191
Hi! My image for SR-72 plan outline shape. Tail seems to be short.
The precondition ; Length 30m, Span 16m and attached three pictures are reliable.
 

Attachments

  • 2015-06-12_2100.png
    2015-06-12_2100.png
    481.6 KB · Views: 49
  • 2015-06-12_2059.png
    2015-06-12_2059.png
    344.8 KB · Views: 51
  • sr72_0.jpg
    sr72_0.jpg
    73 KB · Views: 47
  • SR-72 PLAN VIEW2.jpg
    SR-72 PLAN VIEW2.jpg
    242.4 KB · Views: 41
  • SR-72 PLAN VIEW1.jpg
    SR-72 PLAN VIEW1.jpg
    184.2 KB · Views: 39
Hi My image for SR-72 plan view and other images.
I see various drawings and think desperately, and being no contradiction, I tried to write a drawing. A drawing which resembles the drawing indicated in the second very much has been completed after all.
 

Attachments

  • SR-72 plan view 1.jpg
    SR-72 plan view 1.jpg
    252.5 KB · Views: 38
  • ogee wing plan upper.jpg
    ogee wing plan upper.jpg
    62.9 KB · Views: 45
  • PLAN VIEW.jpg
    PLAN VIEW.jpg
    27.1 KB · Views: 38
Scott's planform is correct, while yours - not. Do not believe PopSci renders, they are made by artist, not an engineer, and plain wrong in many aspects.
Read something about Mach cone and its relation to airframe OML.
 
flateric said:
Scott's planform is correct, while yours - not. Do not believe PopSci renders, they are made by artist, not an engineer, and plain wrong in many aspects.
Read something about Mach cone and its relation to airframe OML.
Oh! Anyway thanks a lot. ;)
You mean that span 16m is error?
 

Attachments

  • yourfile.jpg
    yourfile.jpg
    104.8 KB · Views: 34
  • PLAN VIEW.jpg
    PLAN VIEW.jpg
    27.1 KB · Views: 35
  • SR-72 planform.jpg
    SR-72 planform.jpg
    16.2 KB · Views: 33
I said it before already. BW planform view is likely of single-engine demonstrator.
 
The angle of the Mach wave is determined from:

http://www.secretprojects.co.uk/forum/index.php/topic,1445.15.html

HmHmHm...
arcsin(1/6)=9.594degree.
 

Attachments

  • 5bce6e21ab928363c5a314fc4e342045.png
    5bce6e21ab928363c5a314fc4e342045.png
    929 bytes · Views: 1,925
  • sr71mach.jpg
    sr71mach.jpg
    53.8 KB · Views: 1,434
Hmmm...any way.....
 

Attachments

  • IMG_20150627_0002.jpg
    IMG_20150627_0002.jpg
    834.4 KB · Views: 85
  • IMG_20150627_0004.jpg
    IMG_20150627_0004.jpg
    664 KB · Views: 68
  • IMG_20150627_0003.jpg
    IMG_20150627_0003.jpg
    213.2 KB · Views: 55
  • IMG_20150627_0001.jpg
    IMG_20150627_0001.jpg
    371.2 KB · Views: 101
  • lockheed_hypersonic_study_2_by_kryptid.png
    lockheed_hypersonic_study_2_by_kryptid.png
    650.6 KB · Views: 130
  • highspeed0wu.jpg
    highspeed0wu.jpg
    35.9 KB · Views: 1,250
  • My image.jpg
    My image.jpg
    424.1 KB · Views: 1,333
  • SR-72.jpg
    SR-72.jpg
    170.8 KB · Views: 1,365
  • Single engine demonstrator.jpg
    Single engine demonstrator.jpg
    158.4 KB · Views: 1,413
I think if the length of SR-72 is 30.48m(100ft), wing span is 14.02m(46ft),Wing sweep back angle : 81°/72°/50°
I modify my plan view, because I set wing span as 16m at first.
In the long run the last drawing I made has resembled the bottom one. ;D
If the length of the bottom colored drawing is 100ft, wing span is 47ft(14.3256m).
I feel bottom one is good.
 

Attachments

  • ogee wing plan upper.jpg
    ogee wing plan upper.jpg
    62.9 KB · Views: 66
  • MOD1.jpg
    MOD1.jpg
    247.8 KB · Views: 38
  • PLAN VIEW MOD1.jpg
    PLAN VIEW MOD1.jpg
    212.7 KB · Views: 36
If the length of this model is 100ft, the height is 13ft(3.96m).
Doesn't anyone have this model front view?
I think that the main dimention of SR-72 is as follows.

Overall length : 100ft(30.48m)
Wing span : 46~47ft(14.02m~14.33m)
Height : 13ft(3.96m)
 

Attachments

  • sr72render0003_png6ac4b840-5f10-4715-842f-d874c9730398Large.jpg
    sr72render0003_png6ac4b840-5f10-4715-842f-d874c9730398Large.jpg
    17.4 KB · Views: 87
  • plan under.jpg
    plan under.jpg
    65.3 KB · Views: 107
  • sr72render0005_pngfd3a8e25-1711-4969-a3e5-5e09df32505aLarge.jpg
    sr72render0005_pngfd3a8e25-1711-4969-a3e5-5e09df32505aLarge.jpg
    27.3 KB · Views: 86
Tail of this side view is little short. ;D
Turbine engine is J58?
 

Attachments

  • sr72_big.jpg
    sr72_big.jpg
    225.3 KB · Views: 184
THIS IS NOT SR-72. THIS IS FRV.
 

Similar threads

Back
Top Bottom