DARPA's NOM4D program: re-inventing Manufacturing in space

[TomcatViP]

DARPA today announced its Novel Orbital and Moon Manufacturing, Materials and Mass-efficient Design (NOM4D) program [...] pronounced “NOMAD,”

“NOM4D’s vision is to develop foundational materials, processes, and designs needed to realize in-space manufacturing of large, precise, and resilient Defense Department systems,” said Bill Carter, program manager in DARPA’s Defense Sciences Office. “We will explore the unique advantages afforded by on-orbit manufacturing using advanced materials ferried from Earth. As an example, once we eliminate the need to survive launch, large structures such as antennas and solar panels can be substantially more weight efficient, and potentially much more precise. We will also explore the unique features of in-situ resources obtained from the moon’s surface as they apply to future defense missions. Manufacturing off-earth maximizes mass efficiency and at the same time could serve to enhance stability, agility, and adaptability for a variety of space systems.”

https://www.darpa.mil/news-events/2021-02-05

 

[TomcatViP]

And it had to start with a controversy... Which have really no meaning in a research program, especially at a time when direct genome tempering, weaponized by China, is vocally aknowledged without an ounce of public debate... Here on earth.

DARPA Space Manufacturing Project Sparks Controversy - Breaking Defense

"As you surely know, there is a lot of emotion in this on both sides of the argument, making it as much political as it is legal," said attorney Henry Hertzfeld of the DARPA plans.

breakingdefense.com

 

[TomcatViP]

Toward a civilian control of cislunar orbits:

Space situational awareness in cis-lunar space should be shared freely, as a public good that will help to prevent accidents. Eventually, some kind of mechanism will be needed for monitoring the use of L point and lunar orbits and possibly to assign “slots” to prevent congestion, as occurs in geosynchronous orbit already. International planning for this kind of coordination should begin today.

At the same time, the Biden Administration should terminate the CHPS, Defense Deep Space Sentinel, and NOM4D programs, or reassign them to NASA so as to avoid the potentially destabilizing militarization of cis-lunar space. It should also support the negotiation of a treaty prohibiting weapons in cis-lunar space, including dual use technologies operated by militaries.

https://thebulletin.org/premium/2022-01/cis-lunar-space-and-the-security-dilemma/

 

[X-39]

DARPA Kicks Off Program to Explore Space-Based Manufacturing​

Eight teams selected to pioneer novel ways of designing and manufacturing large structures on orbit​

3/23/2022

DARPA’s Novel Orbital Moon Manufacturing, Materials, and Mass Efficient Design (NOM4D) program is underway with eight industry and university research teams on contract. The selected teams are tasked to provide foundational proofs of concept in materials science, manufacturing, and design technologies to enable production of future space structures on orbit without the volume constraints imposed by launch. The vision is to ferry raw materials from Earth and collect lunar materials for on-orbit manufacturing. The NOM4D program does not involve building any structures on the surface of the moon. All manufacturing would be done in orbital construction facilities and the results utilized in orbital applications.
“Current space systems are all designed, built, and tested on Earth before being launched into a stable orbit and deployed to their final operational configuration,” said Bill Carter NOM4D program manager in DARPA’s Defense Sciences Office. “These constraints are particularly acute for large structures such as solar arrays, antennas and optical systems, where size is critical to performance. NOM4D aims to enable a new paradigm where future structures that support DoD space systems are built off-Earth using designs optimized for the space environment, shedding launch constraints. This would enable enhanced capability, improved robustness, operation in higher orbits, and future cislunar applications.”
For NOM4D, performers won’t be launching raw materials into space, collecting lunar samples or building structures on orbit. Any orbital experimentation would happen in potential follow-on efforts.
The following research teams are on contract to pursue a variety of challenges focused on two areas listed below:

1. In-space materials and manufacturing
   
   • HRL Laboratories, LLC, Malibu, California, will be developing new die-less fabrication processes to make orbital mechanical elements and bonded structures on-orbit.
   • University of Florida, Gainesville, Florida, will develop predictive material and correlative process models to enable on-orbit use of laser forming.
   • University of Illinois Urbana-Champaign, Champaign, Illinois, is working to develop a high precision in-space composite forming process utilizing self-energized frontal polymerization.
   • Physical Sciences, Inc., Andover, Massachusetts, will develop continuous fabrication of regolith-derived, glass-ceramic mechanical structures for use in large-scale orbital applications.
   • Teledyne Scientific Company, LLC, Thousand Oaks, California, will build a comprehensive materials properties database of additive-modified regolith for use in controlled thermal expansion precision orbital structures.
2. Mass-efficient designs for in-space manufacturing
   
   • University of Michigan, Ann Arbor, Michigan, will explore new design approaches to mass-efficient, high- precision, stable and resilient space structures based on metamaterial and metadamping concepts.
   • Opterus Research and Development, Inc., Loveland, Colorado, will develop designs for extreme mass efficient large-scale structures optimized for resiliency and mobility.
   • California Institute of Technology, Pasadena, California, will design novel tension and bending hybrid architectures and structural components with highly anisotropic mechanical response.

During Phase 1, program performers are tasked to meet stringent structural efficiency targets supporting a megawatt-class solar array. In Phase 2, teams are tasked to increase mass efficiency and demonstrate precision manufacturing for radio frequency (RF) reflectors. In the final phase, performers are tasked to demonstrate precision for infrared (IR) reflectors.
“Assuming current space technology trends continue, in 10-20 years we expect to see advances that will enable DoD to take full advantage of the NOM4D-developed technologies and capabilities,” Carter said. “This includes robotic manipulation sufficient to enable assembly of large structures from NOM4D-manufactured components, enhanced on-orbit mobility, and routine re-fueling of on-orbit assets. We also anticipate several other advantages, including more affordable space access and launch costs in LEO [low-earth orbit], GEO [geosynchronous orbit], cislunar space, and beyond.”

https://www.darpa.mil/news-events/2022-03-23