Westland WG.44 - WG.47 1980s stealth helicopter projects

Reconstruction, using the various model photos from AEROSPACE magazine.
Note: The front cockpit of the "anti glint" version differs in the drawing from the model.
 

Attachments

  • WG-47a_ST.gif
    WG-47a_ST.gif
    143.6 KB · Views: 428
  • WG-47a.gif
    WG-47a.gif
    137.2 KB · Views: 282
  • WG-47b.gif
    WG-47b.gif
    132.5 KB · Views: 297
Excellent, Jemiba!

Thanks for sharing your work with us
 
Thanks to those, who shared the basic information ! ;)
 
Dear Jemiba!

Thanks for the nice drawings - very impressive!

Although, I have some doubts in the image of tail rotors in helicopter version with V-tail.
In my humble opinion, they should rotate in the same direction - and models' photos prove this.
On you drawing I see the tail rotors, that rotates in opposite directions.

I would be greatly appreciate, if you check this feature.
 
Yep, you're right, on the top and underside view, they would be turning in opposite directions.
In the side view, it's ok. Was the habit of simply mirroring .. without further thinking. :-[
Will be changed ASAP, sorry and thanks for the clue !
 
Jemiba said:
Yep, you're right, on the top and underside view, they would be turning in opposite directions.
In the side view, it's ok. Was the habit of simply mirroring .. without further thinking. :-[
Will be changed ASAP, sorry and thanks for the clue !

No reasons for excuses, dear Jemiba!
You accomplished quite daring task, when combine all the avaiable information in this 3 (three!) detailed drawings.
And minor errors would be fixed later.

Keep up the good work!
 
The drawings of the versions with T-tail and twin tail rotors are corrected,
please check and tell me, if there's still something wrong.
Thanks again for your sharp eye, Silencer !
 
Dear Jemiba!

Thanks for your kind words, I'm really appreciate it!
You made drawings of 3 different version of quite unusual helicopter, and they all looks very convincing - and artistic in the same time.
Thank you for efforts to prepare them, using limited set of images and sources! In such cases minor imperfections (or even unintentional errors) couldn't diminished the overall good result.

By the way, could anyone remember any other helicopter with two separated tail rotors - build or projected?
In my humble opinion, in this project, Westland' engineers demonstrate a wide variety of ideas, combined in one concept.
 
Westland WG.38 (WG.34 development ? NH.90 precursor ?) https://hushkit.net/2018/01/18/britains-secret-stealth-helicopter-other-exotic-westland-projects/
 

Attachments

  • FB_IMG_1528058388948.jpg
    FB_IMG_1528058388948.jpg
    37.3 KB · Views: 714
TsrJoe said:
Westland WG.38 (WG.34 development ? NH.90 precursor ?) https://hushkit.net/2018/01/18/britains-secret-stealth-helicopter-other-exotic-westland-projects/
IIRC that's a Merlin precursor.
 
A Westland pre-feasibility study for the UK 1980s attack helicopter, via @GbhvfRon on Twitter.
 

Attachments

  • ABChelo.jpg
    ABChelo.jpg
    96.9 KB · Views: 566
What would be the point of the coaxial rotors, when the props could supply all the useful anti-torque already?
Of course the diameter can be less, but the added complexity is sure to offset that.
 
dan_inbox said:
What would be the point of the coaxial rotors, when the props could supply all the useful anti-torque already?
Of course the diameter can be less, but the added complexity is sure to offset that.

Coolness?

Or similar to the AVX: http://www.avxaircraft.com/

"With its unique blend of coaxial rotors and dual ducted fans, the AVX answer to FVL offers greater aerodynamic and fuel efficiency, speed, range, payload, hover out of ground effect (HOGE), and the ability to operate in hotter temperatures and at higher altitudes than any of today's conventional helicopters."
 

Attachments

  • AVX.jpg
    AVX.jpg
    85.7 KB · Views: 449
dan_inbox said:
What would be the point of the coaxial rotors, when the props could supply all the useful anti-torque already?
Of course the diameter can be less, but the added complexity is sure to offset that.

You don't get all the assymetric lift at speed with coaxial rotors. Plus smaller diameter, which also means lower tip speed. Possibly a lower RCS. You don't have to program flightcontrols for varying amounts of assymetric thrust from the props throughout the flight envelope (which would also add mechanical complexity) don't have to have the props running and needlessly taking engine power while in a hover. There are probably more.
 
Harrier said:
A Westland pre-feasibility study for the UK 1980s attack helicopter, via @GbhvfRon on Twitter.

Little Nellie all grown up.

Seriously though have to agree with Harrier.
 
WG.47b model is still in good condition at the Leonardo Archives. They are seeking assistance from Dave Evans (Whirlybird Models) with the rotors, which keep breaking.

From British Aircraft Designs & Prototypes group on Facebook:
 

Attachments

  • 46315190_10155680573926536_7009144704449118208_n.jpg
    46315190_10155680573926536_7009144704449118208_n.jpg
    52.4 KB · Views: 847
  • 46469254_10155680574001536_860700051570163712_n.jpg
    46469254_10155680574001536_860700051570163712_n.jpg
    44.7 KB · Views: 816
  • 46441060_10155680574156536_6003848299616927744_n.jpg
    46441060_10155680574156536_6003848299616927744_n.jpg
    51.2 KB · Views: 813
From The Helicopter Museum yesterday
 

Attachments

  • IMG_20181115_160149.jpg
    IMG_20181115_160149.jpg
    1.4 MB · Views: 247
  • IMG_20181115_160202.jpg
    IMG_20181115_160202.jpg
    3.7 MB · Views: 669
  • IMG_20181115_160210.jpg
    IMG_20181115_160210.jpg
    3.4 MB · Views: 761
3 more. Low light and model in perspex box so no flash mean I am posting images at full size.
 

Attachments

  • IMG_20181115_160128.jpg
    IMG_20181115_160128.jpg
    1.4 MB · Views: 239
  • IMG_20181115_160145.jpg
    IMG_20181115_160145.jpg
    3.9 MB · Views: 233
  • IMG_20181115_160137.jpg
    IMG_20181115_160137.jpg
    3.3 MB · Views: 256
Thanks flateric. I work there, but had missed this! I shall be going.
 
If you can tape a video or record an audio, I think many would be obliged...
 
Those things aren't allowed but I will see what can be said after.
 
The talk had several interesting points, but no fundamentally new revelations. Lots of details that were new though.

Most interesting to me was the WG.42 from 1982 which was small, single-engined and intended to be simple to maintain at the front line. The crew sat side-by-side in titanium 'dustbins'. Although different in every way, it reminded me of the Cierva Weir W.9 for some reason.

The Army requirement moved away from small and light to big and 'capable'. This also meant expensive so the WG.44 was put forward with a WG.30 rotor head to save costs. Signatures were lower but not by enough.

Tonal and WG.47 were the answers to ever increasing requirements. The latter had a very complex IR suppression system. The twin tail rotors reduced RCS and also allowed pilots to stop the aircraft rapidly by pulling the nose up to 45 degrees without ballooning or overspeeding the rotors. This was seen as a useful tactic.

The odd 'low glint' canopy (originally on the WG.42) was hated by pilots who tried the mock-up. It was made bigger as a result, but the rear gunner had only limited side vision, although their cockpit was 8 feet wide!

Overall WG.47 seemed a bit problematic. Very heavy, the most drag of any design ever tested by Westland, and with non-retracting gear, no gun and other limitations it seems it was very much a work in progress when it ended.

Comanche seemed better thought through, and the speaker spoke favourably about it compared to WG.47, but it was hugely expensive.

I asked permission to take pictures of some models on display at the end, which the speaker gave. Note the rotors are from a Lynx model, not the all-new 'stealth' blades and faired rotor head of the actual design.
 

Attachments

  • WG44.jpg
    WG44.jpg
    71.9 KB · Views: 201
  • WG47.jpg
    WG47.jpg
    111.6 KB · Views: 213
  • WG44&WG47.jpg
    WG44&WG47.jpg
    111.6 KB · Views: 257
Looking at earlier pictures in this thread I think the 'WG44' model is actually WG.45. This was not mentioned however.
 
"The twin tail rotors reduced RCS..."

Was this due to the smaller size of the rotors?
 

Similar threads

Back
Top Bottom