Aotian-1, a Chinese hypersonic reentry demonstrator flown tested on 20/09/2013?

antigravite

ACCESS: Top Secret
Joined
25 April 2008
Messages
833
Reaction score
220
Hi,

Available information on Iaotian-1 Aotian-1 is still confusing and remains to be pieced up properly.

China has seemingly flown-tested, on september 20, 2013 an unpowered experimental vehicle code-named Iaotian-1 Aotian-1 (遨天1号 or 遨天一号in the Hulun Buir (呼伦贝尔市) region (northeastern inner Mongolia) a region of grasslands and high steppes. And now a test range too for TAEM (Terminal Area Energy Management) maneuvers / landing of a potential chinese Reusable Launch Vehicle (可重复使用运载器) contender.

This project would originate from CALT (Chinese Academy of Launch Vehicle Technology) and as such might be a direct heir of their "old" project 921-706 (the RLV rival of Shenzhou). CALT is part of CASC.

As of today, other forum sources, where chinese-speaking members comment ([Elixir] and [Henri K.] - see footnote below), indicate that:
(1) the piece of information originates from CALT;
(2) this piece of information was essentially targeted towards Western websites to pass it along, with scant information available on screened chinese forums (Weibo, etc.);
(3) one or more pictures posted on Weibo (微博) by a project member, were immediately erased, but some managed to be archived (see below);
The picture is said to originate from the following CALT-related blog [edit: latest post published by hangtianchuangxin dates back to 2014-10-30 21:18 来自 iOS, no follow up ever after]:
http://e.weibo.com/hangtianchuangxin
(4) the vehicle -- which, to the best of other knowledgable Chinese-speaking forum members, has not been pictured yet -- but would bear striking similarities with Dream Chaser (well, project 50/50 and Bor4 would have been a better historical reference for the sake of accuracy). Conditional is important: Dream Chaser was flown tested last week and there might be creating some sort of confusion here.

All of these information need confirmation from other sources.

Anyone?

;)

A.

PS) This post draws heavily from information made available by [Henri K.] aka [Elixir] aka [Henri Kenhmann] aka [hk299792458] (these alias equivalences were formally acknowleged on Nov.14, 2012 on defense.pk forum in response to a question by [qwerrty]) who is/are a very active blogger supposedly but very unlikely from France (法国), mostly writing in French, the language of diplomacy. The family name Kenhmann happens to be ultra-extremely rare and seems to have german origins (Kehn borrows from an old german word meaning "skiff" or "barge"). Apart from a canadian ebay account with the surname "Kenhmann", little could be found in 2012 on Henri Kenhmann, and Kehnmann in general. This(these) individual(s) is(are) active on, and inactive but subscribed to, many other space-related forums (although this might be the same person using different aliases) such as: abcbourse.com, air-defense.net, allhtml.com, astronautique.actifforum.com, beatzone.cz, boardreader.com, boursematch.com, checkoutthelatest.com, clip.dj, daily-bourse.fr, defense.pk, dp.sina.cn, flickr.com, forumconstruire.com, forum.hardware.fr, freemp3u.com, plus.google.com, hmongplay.com, indiandefence.com, imageshack.us, livraddict.com, merops.com, militaryphotos.net, moneymakergroup.com, ps3youtube.com, shelby.tv, socialblade.com, talkgold.com, video.mivzakon.co.il, vtap.com, youreplay.com, youtube.com, etc. to name a few. It very surprising he's not an (active) member of SPF yet, since it would have been easier for us all to have him starting this new thread. I'm sure SPF members would be eager to be privileged for new scoops from this "well-known and respected forum member on Chinese military developments" (quote from [mepal1], 28/09/2013, http://www.chinesedefence.com/forums/chinese-navy/1464-type-054-type-054a-jiangkai-class-ffg-19.html/). On other forums, [Henri K] is credited with numerous records of accurate information on every possible chinese-related military fields. On 09/07/2013, sinodefenceforum.com member [SinoSoldier] wrote, without prior fact-checking: "There is this guy called Henry Kenhmann from France who works as an engineer. He has been a very close follower of the Chinese military and somehow has documents relating to weapons systems never heard of before. His predictions are scarily accurate and as far as "track record" goes, his information seems to be a lot more accurate than HuiTong. Some of his "predictions" are the 48000 ton LHD, HQ-8, HQ-26, solid state laser, etc. He asserted that the 055 will be in construction in 2013 before anyone else did, and he apparently also got these rumors: - Type 055 will have QC280 ; - Type 055 will be 12000 tons ; - It will have the Type 1130 CIWS ; - Construction will possibly begin in 2013 ; - Type 055 will have the PJ38 ; - It will have superior ECM ; - A smaller complement ; - Same radar as 052D" (source: http://www.sinodefenceforum.com/navy/type-055-ddg-plans-next-generation-destroyer-thread-3-6480.html). In light of these information, and as a key provider of goldmine chinese R&D hard-to-find information, [Henri K]'s statements on Aotian-1 should be studied seriously: [Henri K] might well be considered like a news agency (sort of), tied to -- informally or not -- chinese government-related sources/agencies/insiders (controlled "leak" and information dissemination), which make their information extremely valuable but prone to careful fact checking and always to be framed in balanced, contextual analysis. As time goes by, [Elixir] behaves like an online evangelist, with the clear intent to visibly shape one specific online environment: the perception of Chinese strength at the dawn of the 21st century, through select aerospace and military topical prisms. [Elixir] exhibits different distinct writing styles and may involve several individuals. However, given the scope and almost continuous rate of information diffusion, on an almost full-time basis on the aforementioned forums/websites, [Elixir] may also be part of a larger, plan. It may likely be considered as one of many apparent visibility modes of a well-structured, state- or para-state sponsored organization. Now, why chose the alias [Elixir] (酏) remains a mystery wrapped in a riddle: An elixir is conveniently defined as a "clear, sweet-flavored liquid used for medicinal purposes, to be taken orally and intended to cure one's ills", often presented as a "solution of at least one active ingredient" with the requirement to be "stored in a tightly closed and light resistant container away from direct heat and sunlight". [Elixir] went remarkably silent in late january 2014 on target forums of interest highlighting the difficulties for some observers to rely on this single feeding source to cast their own (actually "adroitly shaped") view of Chinese aerospace and military organizations. [Elixir] was revived and back again on the operational online information theater on 02/17/14. Their vanishing perfectly matches up with celebrations of the Chinese's New Year holidays. On April 27, 2016 at 9:12 LT [Elixir] announced pulling out from Forum de la Conquête Spatiale (FCS) claiming health reasons. A few days later, [Elixir] was back at it again, with new fluency in French and complete refurbished writing skills and grammatical style (stylometry softwares such as JGAAP could be helpful here). Could this be interpreted as a turnover? Whichever organization goes behind manpowered [Elixir] is likely to be state-sponsored. The purpose and aims of this apparent psyop yet has to be determined. But honestly, its aims are very clear. N'es-ce pas? Aller Zhu
;)
 

Attachments

  • milita10.jpg
    milita10.jpg
    67.3 KB · Views: 1,123
Re: Iaotian-1, a Chinese hypersonic reentry demonstrator flown tested on 20/09/2013?

Aotian-1 vs Shenlong

  • Needless to say, Iaotian-1 Aotian-1 should not be confused with the Shenlong Space Plane (神龙”空天飞机), developed as part of the 863 State High Technology R&D Plan (国家高技术研究发展计划).
  • The Shenlong Space Plane project was code named 863-706. As to the vehicle, it was a wingle reentry vehicle weighting 4 ton. This vehicle was seemingly flown tested several times, including at Mach 15 on January 8, 2011. Chinese media outlets used the specific expression "试飞" standing for "test flight" to qualify the test. Of additional interest, the development of the Shenlong Space Plane has been associated with the 611 Research Institute, Chengdu Aircraft Corporation, Aviation Industry Corporation of China (AVIC).

sources: Craig Covault, "Evidence Builds For Chinese Mach 15 Spaceplane Test from 60 mi. Altitude", Aerospace America, 12/09/2011, http://www.americaspace.com/?p=9076

Andrew Erickson and Gabe Collins,“Spaceplane Development Becomes a New Dimension of Emerging U.S.-China Space Competition,”China SignPost™洞察中国), No. 62, 16/08/2012, http://www.chinasignpost.com/2012/08/spaceplane-development-becomes-a-new-dimension-of-emerging-u-s-china-space-competition/

:) :p ;D ::)

A.
 
Re: Iaotian-1, a Chinese hypersonic reentry demonstrator flown tested on 20/09/2013?

All chinese articles I read through so far (thx googletranslate!) just comment on information made available on western blogs. No real "news", actually. And lots of nationalistic statements on the glorious chinese ability to catch up with US technological marvels in force projection (with a mix of FOBS, X-37B, J-20 along the way). Few interesting comments but loads of crap. From what I could read up to now, Iaotian-1 Aotian-1 is described as a transatmospheric vehicle capable of orbiting the earth once. It is said to be similar to the "Dream Chaser". Again, this is all confusing and I am looking forward to reading other independent news to corroborate all that.

Very intriguing indeed.

A.
 

Attachments

  • baidu-??1?-search-20131102.png
    baidu-??1?-search-20131102.png
    259.1 KB · Views: 1,084
Re: Iaotian-1, a Chinese hypersonic reentry demonstrator flown tested on 20/09/2013?

Last post for today.

As of now, a search using the folliwing keyword "遨天1号" in the "image section" of Baidu (i.e. the equivalent of "google image"), direct link here:
http://image.baidu.com
... ended up with no pertinent result (unless you are a soccer lover, for whatever keyword/database reason.)

A.

PS) Edit 20160510. On may also use the following keyword: 遨天一号
 
Re: Iaotian-1, a Chinese hypersonic reentry demonstrator flown tested on 20/09/2013?

Attached is a screengrab of Hangtian Chuangxin's Weibo blog which started it all.

A.
 

Attachments

  • 20130924_69c9efdfd00b00140e11XJWcThpCrxJg.jpg
    20130924_69c9efdfd00b00140e11XJWcThpCrxJg.jpg
    63 KB · Views: 950
Re: Iaotian-1, a Chinese hypersonic reentry demonstrator flown tested on 20/09/2013?

Sometimes the code-name also reads/translates as "Aotian-1"

A.


[added: Iaotian-1 is one of several possible translitterations, Aotian-1 seems more appropriate]
 
Re: Iaotian-1, a Chinese hypersonic reentry demonstrator flown tested on 20/09/2013?

Hi back;

First, a big thank you to Deino for having posted this thread today on SinoDefense Forum (SDF) -- I'm not a member of this forum yet -- and "asking for more". Link is: http://www.sinodefenceforum.com/

Please find below a compendium of first reactions. For the sake of clarity, capitalized words put into brackets -- i.e. [QWERTY] -- indicate a forum member alias under which the related comment was made.

Some SDF members reposted a well-known CAV-related waverider configuration circulated years ago, originating from a Chinese technical publication. Patent literature may prove to be more interesting, however.

[SINOSOLDIER], SDF member, had "heard the same thing a few weeks prior. Best to wait it out."

[KROKO], SDF member, indicated that the Hulun Buir was very close to the Russian border and expressed his "doubts that china would want to test unpowered planes on that place. Could fall into the wrong side of the border..."

[SIEGECROSSBOW], SDF supermoderator, noted that "The only information on this was the aforementioned blog post, but even that was take down pretty quickly. I think waiting is the better option here, unless you want the wall climbers to go to Inner Mongolia."
 
Re: Iaotian-1, a Chinese hypersonic reentry demonstrator flown tested on 20/09/2013?

OK guys. I'll keep investigating and posting stuff until I understand what's going on.

A.

Fact checking starts with Hulun Buir region.
Yes indeed, it's upnorth and close to the Russian border.
These wikipedia maps shows us clearly where it is.

http://en.wikipedia.org/wiki/File:China_Inner_Mongolia_Hulunbuir.svg
http://en.wikipedia.org/wiki/File:China_Inner_Mongolia_location_map.svg

Challenge: identifying a test range suitable for a hypersonic winged test vehicle (in this region).

Googlemap anyone?

A.
 

Attachments

  • 577px-China_Inner_Mongolia_location_map.svg.png
    577px-China_Inner_Mongolia_location_map.svg.png
    124.5 KB · Views: 889
  • 705px-China_Inner_Mongolia_Hulunbuir.svg.png
    705px-China_Inner_Mongolia_Hulunbuir.svg.png
    151.5 KB · Views: 851
Re: otian-1, a Chinese hypersonic reentry demonstrator flown tested on 20/09/2013?



Patent No.CN103319194
Issued : 2013-09-25
Preparation method of high-strength anti-contact-damage porous SiC
Inventor(s): ZHOU YANCHUN; WANG XIAOFEI; LU XINPO; TAO MENG; HU JIDONG; SUN XIN; FENG ZHIHAI
Applicant(s): AEROSPACE RES INST OF MATERIALS AND PROC TECHNOLOGY; CN ACADEMY LAUNCH VEHICLE TECH
Application number: CN20131251379 20130624
Priority number(s): CN20131251379 20130624
Abstract : The invention relates to a preparation method of high-strength anti-contact-damage porous SiC, which comprises the following steps: (1) carbonizing wood at 600-1100 DEG C in an inert gas or hydrogen atmosphere for 1-6 hours; (2) carrying out dipping treatment on the carbonized wood in liquid polycarbosilane in a vacuum environment to obtain a carbon template; (3) curing the carbon template subjected to dipping treatment at 180-250 DEG C for 1-5 hours; and (4) carrying out high-temperature treatment on the cured carbon template in an inert gas or hydrogen atmosphere or in a vacuum environment to obtain the porous SiC ceramic. The method provided by the invention can reserve the porous structure in the wood template, so that the porous SiC can still have high compression strength under the condition of high porosity and also have excellent anti-contact-damage capacity.


Patent No. CN103253941
Issued : 2013-08-21
High-heat conductance ZrB2 high-temperature ceramics and preparation method thereof
Inventor(s): SUN XIN; ZHOU YANCHUN; LI JUNPING; FENG ZHIHAI
Applicant(s): AEROSPACE RES INST OF MATERIALS AND PROC TECHNOLOGY; CN ACADEMY LAUNCH VEHICLE TECH
Application number: CN20131172949 20130510
Priority number(s): CN20131172949 20130510
Abstract : The invention relates to a high-heat conductance ZrB2 high-temperature ceramics and a preparation method thereof, in particular relates to a method for preparing a high-heat conductance fiber toughening ZrB2 high-temperature ceramics and a method for improving the heat conductivity of a composite material, and belongs to the technical field of high-temperature ceramics. The high-temperature ceramics comprises zirconium boride powder and mesophase pitch-based carbon fiber. The ZrB2 high-temperature ceramics prepared by adopting the method has the room temperature heat conductance of 100 W/(mK) which is higher than the heat conductance of a pure ZrB2 high-temperature ceramic material (about 60W/(mK)) reported in home and abroad.

Patent No. CN102915029
Issued: 2013-02-06
Avionics system automatic test platform based on reusable spacecraft
Inventor(s): LIU XUDONG; XU HAIYUN; GAO XIANGWU
Applicant(s): CN ACADEMY LAUNCH VEHICLE TECH
Application number: CN20121388503 20121015
Priority number(s): CN20121388503 20121015
Abstract: The invention discloses an avionics system automatic test platform based on a reusable spacecraft, which comprises an interface adapter, special test equipment, a photoelectric isolation network and a test terminal. According to the characteristics that the spacecraft has many subsystems and the subsystems are distributed dispersedly, the avionics system automatic test platform based on the reusable spacecraft unifies the adapter of the comprehensive test platform, reduces the types of ground equipment, realizes functional modularization of each system and integration of the system structure, and can automatically generate and change input signals or excitation sources, automatically control the on and off of input and output of a tested object, automatically measure and record output signals, automatically process test data, automatically interpret the work state of test equipment, automatically execute test program and automatically judge the test data so as to shorten the construction time of a test system and solve the problem about distributed remote test. The test system has high generality, flexibility and test efficiency, reduces the workload of testers and improves the test quality and the test efficiency.


Patent: CN103134900
Issued : 2013-06-05
Ablation test method of thermal protection structure of high supersonic velocity aircraft
Inventor(s): CHEN DING; CHEN LIANZHONG; MA HONGQIANG; WANG YING
Applicant(s): CHINA ACADEMY OF AEROSPACE AERODYNAMICS CAAA
Application number: CN2013136622 20130130
Priority number(s): CN2013136622 20130130
Abstract: The invention discloses an ablation test method of a thermal protection structure of a high supersonic velocity aircraft. The ablation test method of the thermal protection structure of the high supersonic velocity aircraft includes the following steps: placing the thermal protection structure of the high supersonic velocity aircraft in an electric arc wind tunnel to conduct an ablation test. In the ablation test process, a computer utilizes a synchronous device to drive two cameras to conduct collection on an image pair, a filter device is adjusted in real-time to conduct light intensity adjustment to obtain an optical image quality when collection is conducted, and the computer processes the image pair which is collected at the same moment to obtain a three-dimensional morphology information of a measured object at the moment. According to three-dimensional morphology information of the measured object at different moment, ablation amount of the measured object is calculated. The ablation test method of the thermal protection structure of the high supersonic velocity aircraft is simple in operation and low in cost, can overcome extremely bad experiment conditions of the electric arc wind tunnel and can obtain surface morphology change course and ablation of the thermal protection structure of the high supersonic velocity aircraft in real-time.


Patent No. CN103090898
Date issued : 2013-05-08

Flight data recording equipment ground integrated test system
Inventor(s): QIU CHANGQUAN; ZHAO LIANG; LI XIAO; ZHANG WEI; ZHENG YU
Applicant(s): NEAR SPACE INST FOR AIRCRAFT SYSTEMS ENGINEERING; CN ACADEMY LAUNCH VEHICLE TECH
Application number: CN20111335886 20111031
Priority number(s): CN20111335886 20111031
Abstract: The invention relates to a flight data recording equipment ground integrated test system which comprises a main control computer, a simulation control computer, a verification control computer, a signal simulation sub-system, a signal simulation sub-system, a communication network sub-system and a synchronous trigger system. The main control computer completes functions of user management, report output, flight data interpretation and the like, the simulation control computer is a control main center of the signal simulation sub-system, the verification control computer is a control main center of the signal verification sub-system, the signal simulation sub-system outputs all kinds of real time simulation signals, the signal verification sub-system is composed of testing apparatus and verifies the correctness or the precision of the simulation signals output by the signal simulation sub-system, the communication network sub-system is a communication platform between computers and the testing apparatus in the system, and synchronous trigger system realizes the clock synchronization and trigger synchronization of the signal simulation sub-system and the signal simulation sub-system. The flight data recording equipment ground integrated test system provides an accurate signal source to the full test of ground environment flight data recording equipment


Patent No. CN103076806
Issued: 01/05/2013
Integrated analyzing and setting method for control parameters of three-loop automatic pilot
Inventor(s): GUO HONGBO; ZHUANG LING
Applicant(s): BEIJING AEROSPACE CHANGZHENG AIRCRAFT INST; CN ACADEMY LAUNCH VEHICLE TECH
Application number: CN20111329422 20111026
Priority number(s): CN20111329422 20111026
Abstract: The invention relates to the technical field of spacecraft control and particularly discloses an integrated analyzing and setting method for control parameters of a three-loop automatic pilot. The integrated analyzing and setting method comprises the following steps of: firstly, establishing a control loop model of the three-loop automatic pilot; secondly, setting a pitching motion relative damping coefficient after compensating an attitude angular velocity feedback circuit to acquire an attitude angular velocity control parameter and the open-loop cross-over frequency of the attitude angular velocity feedback circuit; thirdly, acquiring an open-loop gain system of a control system according to an open-loop transmission function of the control system and acquiring a closed-loop transmission function which is inputted to a guidance spacecraft by an overload instruction after correction and is outputted in an overload manner; and fourthly, acquiring the attitude angular velocity control parameter, an overload feedback control parameter and an overload instruction correction parameter. According to the integrated analyzing and setting method, the solving of a nonlinear equation is avoided; in addition, attitude stability and attitude control precision of the guidance spacecraft can be maintained by the acquired parameter under various single deviations and combined deviation and the balancing state of the spacecraft required by the guidance instruction is quickly realized.


Patent No. CN103076257
Issued: 2013-05-01
Accompanying atmospheric density measuring device
Inventor(s): ZHANG PENGYU; YANG DING; LU FENGLING; YU PING; LIU JIANHUI
Applicant(s): BEIJIN NEAR SPACE VEHICLE SYSTEM ENGINEERING RES INST; CN ACADEMY LAUNCH VEHICLE TECH
Application number: CN20111328334 20111025
Priority number(s): CN20111328334 20111025
Abstract : The invention belongs to near space environment, atmospheric density measurement, and aerodynamic parameter identification devices, and specifically relates to an accompanying atmospheric density measuring device. The device comprises a frame. Sheet metal reinforcement is applied inside the frame, such that inner devices can be fixed. A power source, a three-way overload sensor, a central processing unit, and a GPS radar integral machine are sequentially fixedly arranged on an end of the frame. An antenna is sleeved on the frame, wherein a certain gap is preserved between the antenna and the GPS radar integral machine. The invention has the advantages that: as a means for following the flight path of a reentry vehicle and for carrying our density measurement, the accompanying atmospheric density measuring system is simple and reliable, and has low cost. With the accompanying atmospheric density measuring device, measuring demands of aerodynamic parameter identification can be satisfied. Also, the invention is designed independent from a reentry vehicle, such that the overall design difficulty of the reentry vehicle is not increased.


Patent No. CN202944563
Issued: 2013-05-22
Wing body connecting layer type embedding structure of silicon substrate heat proof layer for hypersonic flight vehicle
Inventor(s): CHEN WEIHUA; ZHAO CUIMEI; CAO ZHANWEI; WANG ZHENGYU; ZHOU KEHUA; YU MINGXING; LIU QUAN
Applicant(s): BEIJING NEAR SPACE AEROCRAFT SYSTEM ENGINEERING INST; CN ACADEMY LAUNCH VEHICLE TECH
Application number: CN20122540192U 20121022
Abstract: The utility model belongs to a wing body connecting structure of a flight device, and in particular discloses a wing body connecting layer type embedding structure of a silicon substrate heat proof layer for a hypersonic flight vehicle. The structure comprises a wing heat proof layer, a wing metal structure, a metal framework and a cone heat proof layer. The wing heat proof layer is arranged outside the wing metal structure, the cone heat proof layer is arranged outside the metal framework, and the wing heat proof layer is arranged inside the cone heat proof layer. The connecting structure provided by the utility model can be used for preventing the wing front tip of the wing metal structure from warping to from a sharp stagnation point and overcoming the severe problem that the wing body connection which is not protected by the heat proof layer is directly invaded by hot air flows.


Patent No.CN102361531
Date Issued : 2012-02-22
Device and method for generating large-area, uniform and non-magnetized plasmas
Inventor(s): KAI XIE; XIAOPING LI; YANMING LIU; MIN YANG; LIANG ZHAO; YONGQIANG QIN; WEI AI; DONGLIN LIU
Applicant(s): UNIV XIDIAN; BEIJING NEAR SPACE AEROCRAFT SYSTEM ENGINEERING INST
Application number: CN20111328200 20111026
Priority number(s): CN20111328200 20111026
Also published as: CN102361531
Abstract : The invention belongs to the field of gas discharge plasmas and relates to a device for generating the plasmas through gas discharge, in particular to a device and a method for generating large-area, uniform and non-magnetized plasmas. The device is characterized by comprising a plasma generation cavity body, a vacuum device and a plasma power supply; the plasma generation cavity body comprises acylindrical cavity body and a net type discharge electrode; the net type discharge electrode is a hollow round net body, the outside diameter of which is less than the inside diameter of the cylindrical cavity body; the net type discharge electrode and the cylindrical cavity body are connected to form a concentric circle structure through an insulated support; an observing window and a hinge window are connected and fixed at two ends of the cylindrical cavity body; ; and the device can be used for researching the influence of the plasmas on electromagnetic waves. By overcoming the disadvantagesof the prior art, the device and the method for generating the large-area, uniform and non-magnetized plasmas, which are good in repetitiveness, low in error and sustainable, are provided.


Patent No. CN202946516
Issued: 2013-05-22
Screw thermal protection device

Inventor(s): CUI PIN; ZHANG HONGYU; ZHAN XUJUN; LIU GUOQIAN; CUI PENGFEI; WANG SHUYU; WANG SHAOHUA
Applicant(s): BEIJING NEAR SPACE AEROCRAFT SYSTEM ENGINEERING INST; CN ACADEMY LAUNCH VEHICLE TECH)
Application number: CN20122533222U 20121018
Priority number(s): CN20122533222U 20121018
Abstract: The utility model belongs to the technical field of thermal protection, in particular to the screw thermal protection device. The screw thermal protection device comprises a cone-shaped sleeve, a heat insulation cushion a, a heat insulation cushion b, a heat proof hat and a flexible heat insulation felt. The screw thermal protection device solves the technical problems that a screw thermal protection device in the prior art is insufficient in shear-bearing capacity and poor in high-temperature resistance, and hardly bears a high-heat-flow high-speed high-dynamic-pressure pneumatic environment of a hypersonic velocity gliding aircraft bottom sunshade device, and improves shear-bearing capacity and high-temperature performance obviously, ensures sufficient connecting strong stiffness of an ordinary screw under the act of a bottom hostile heat environment, achieves reliable connection of devices on the bottom sunshade of the aircraft bottom under the act of high heat flow, high speed and high dynamic pressure pneumatic loading.


Patent No. CN103044057
Date Issued : 2013-04-17
Carbon foam in-situ reinforced carbon aerogel high-temperature thermal insulation material and preparation method thereof

Inventor(s): LI JUNNING; HU ZIJUN; SUN CHENCHENG; WANG XIAOTING; SONG ZHAOXU
Applicant(s): AEROSPACE RES INST OF MATERIALS AND PROC TECHNOLOGY; CN ACADEMY LAUNCH VEHICLE TECH
Application number: CN2013112731 20130114
Priority number(s): CN2013112731 20130114
Abstract: The invention relates to a carbon foam in-situ reinforced carbon aerogel high-temperature thermal insulation material and a preparation method thereof; the carbon foam in-situ reinforced carbon aerogel high-temperature thermal insulation material has the characteristics of high temperature resistance, low heat conductivity and high strength, and is applicable to thermal protection system of the hypersonic speed aircraft, belonging to the technical field of high-temperature thermal insulation material. The thermal insulation material takes carbon foam which is formed in an in-situ manner as a reinforcing skeleton and carbon aerogel as a substrate, and eliminates pores between the carbon foam skeleton and the carbon aerogel caused by the conventional reinforcing method through a common carbonization; the prepared carbon foam reinforced carbon aerogel has the characteristics of high temperature resistance, low heat conductivity and high strength, and is machinable; the room temperature heat conductivity can be reduced to 0.04W/m.k, and the maximum use temperature in an inert atmosphere can reach 3000 DEG C.


Patent No. CN102709670
Issued: 2012-10-03
Magnetic antenna for improving penetrability of electromagnetic wave in plasma
Inventor(s): QING ZHAO; XIAOJUN XING; JIANMING TANG
Applicant(s): UNIV ELECTRONIC SCIENCE & TECH
Application number: CN20121212888 20120624
Priority number(s): CN20121212888 20120624
Abstract: The invention belongs to a magnetic antenna for high-speed aircraft navigation and communication, which comprises a columnar spiral antenna, a closed antenna cover, a strong magnet ground plate and a conical coaxial feeding wire column. In the magnetic antenna, the spiral antenna of an axial mode is adopted, the antenna and a strong permanent magnet are integrated, the magnet serves as a magnetic field generator to generate a high permanent field and also serves as the antenna ground plate, when magnetic field intensity B is more than or equal to 0.5T, signal emitted by the spiral antenna can effectively penetrate a plasma, when the magnetic field of the permanent magnet is increased to 1.0T, antenna gain is increased to 9.6dB and approaches 10.6dB of the antenna gain in air, and the attenuation of electromagnetic wave during transmission in the plasma is reduced by 30dB. Therefore, the magnetic antenna has the characteristics of frequency bandwidth, circular polarization bandwidth, low attenuation amplitude of the electromagnetic wave of the antenna and the like, the antenna gain and the penetrability of the plasma are effectively improved, and the defect of communication interrupt caused by the existence of a surface plasma sheath in a background technology is overcome.


Patent No. CN102447518
Issued: 2012-05-09
Signal channel comprehensive processing method used under near space hypersonic velocity condition
Inventor(s): LIANG YANG; YONGQIANG QIN; ZHENGGUANG HE
Applicant(s): NEAR SPACE INST FOR AIRCRAFT SYSTEMS ENGINEERING; CN ACADEMY LAUNCH VEHICLE TECH
Application number: CN20111356261 20111110
Priority number(s): CN20111356261 20111110
Abstract: The invention belongs to the signal channel processing method and specifically relates to a signal channel comprehensive processing method used under near space hypersonic velocity condition and aims to simulate influence of bad change of physical environment to communication. In the signal channel comprehensive processing method, when the near space aircraft is communicating with a ground base, the signal channel processing of the two parties in the communication comprises free space attenuation, atmosphere attenuation, multipath effect, Doppler shift, spatial noise and plasma sheath layer signal channel; when the near space aircraft is communicating with a space base, the signal channel processing comprises space attenuation, spatial noise, multipath effect, Doppler shift and plasma sheath layer signal channel. The invention accurately simulates signal transmission state under near space complex environment, covers physical characteristics such as black-out area, rain attenuation, low angle of elevation and etc.

Patent No.CN102724003
Date Issued: 2012-10-10
Method for testing influence of plasma on characteristics of space communication signal
Inventor(s): RUNHUI WU; MIN XI; HONGYAN LIU; GANG MENG; JIAQI LIU; ZHEFENG YU; QING CHANG; ZHIYE JIANG; YIZHOU LI; HONGJIE LI; LEI YUAN; YONG XU; YULONG LI
Applicant(s):BEIJING AEROSPACE INST OF THE LONG MARCH VEHICLE; CN ACADEMY LAUNCH VEHICLE TECH
Application number: CN20121122094 20120423
Priority number(s): CN20121122094 20120423
Abstract : The invention discloses a method for testing influence of plasma on the characteristics of a space communication signal. According to the method, the scheme of testing the influence of the plasma on the characteristics of a space transmission communication signal is designed; a comparison result of the modulated signal time domain characteristics, frequency domain (amplitude frequency and phase frequency) characteristics, demodulated and decoded eye pattern characteristics and constellation diagram characteristics of the space transmission communication signal which is transmitted in a plasma region and in a non-plasma region, and an error code counting result are given, wherein the electron density, collision efficiency and space size of the plasma region are invariables or variables; a test platform is provided for developing a ground verification test for the influence of the plasma which is in a vacuum state and has randomly-distributed characteristic parameters on the characteristics of the space transmission communication signal; and accurate measurement and data post-processing results are provided for analysis and rule summarization of the influence of the plasma in different characteristic parameter states on a ground simulation communication modulated signal transmission link.


Patent No. CN202420804
Date Issued: 2012-09-05
Modal test measuring device for hypersonic speed aircraft rudder structure at high temperature of 1400 DEG C
Inventor(s): DAFANG WU; MENG MOU; LIN ZHU; ANFENG ZHOU
Applicant(s): UNIV BEIHANG
Application number: CN2012233383U 20120202
Priority number(s): CN2012233383U 20120202
Abstract: A modal test measuring device for a hypersonic speed aircraft rudder structure at high temperature of 1400 DEG C comprises a hypersonic speed aircraft rudder structure test part, an L-shaped fixing structure, a water-cooled cooling pipeline, a silicon carbon infrared radiation array, a shock excitation source, a molybdenum force transmission rod, a molybdenum bar guide rod, an acceleration transducer, a double platinum rhodium thermocouple transducer, a computer and a high-temperature ceramic heat insulation plate. When in a hypersonic speed aircraft rudder structure test, the silicon carbon infrared radiation array heats the rudder structure, simultaneously, the shock excitation source generates random vibration, and accordingly a high-temperature thermal vibration coupling test environment is formed. The metal molybdenum bar guide rod is directly mounted on the hypersonic speed aircraft rudder structure, vibration signals of the hypersonic speed aircraft rudder structure are transmitted out of a high-temperature thermal field at the temperature of 1400 DEG C, the normal-temperature acceleration transducer mounted at a cold end of the molybdenum bar guide rod is used for dynamically measuring thermal modal signals of the rudder structure, the thermal modal signals of the rudder structure are guided to a normal temperature region, and an effective dynamic high-temperature thermal modal test means is provided for developing a hypersonic speed long-range strategic aircraft.


Patent No. CN102509946
Date Issued: 2012-06-20
Single-ended control and double-ended separation separable electric connector
Inventor(s): MINGJIAN PAN; BIN LI; JUNPENG CUI; JINGHUI LAN; LIXIA RONG; JUANJUAN CAO
Applicant(s): BEIJING NEAR SPACE AEROCRAFT SYSTEM ENGINEERING INST; CN ACADEMY LAUNCH VEHICLE TECH
Application number: CN20111335888 20111031
Priority number(s): CN20111335888 20111031
Also published as: CN102509946
Abstract : The invention belongs to the technical field of electric connectors, relates to separation-break-away electric connectors, and particularly relates to a singe-ended control and double-ended separation separable electric connector. At present, the singe-ended control and double-ended separation separable electric connector solves the problem of electrical connection of complete disconnection of a connector under long-time high-temperature conditions. The separable electric connector comprises an outer plug, a socket and an inner plug, a double-ended locking device is arranged in the socket, and the outer plug and the inner plug respectively comprise a set of electromagnetic separation mechanism.; An RC delay circuit and an outer electromagnetic coil are arranged in the outer plug, an inner electromagnetic coil is arranged in the inner plug, and both the inner electromagnetic coil and the outer electromagnetic coil are controlled by a control end outside the outer plug. The separable electric connector is simple, high in reliability and capable of adapting to long-time high-temperature thermal protection.


Patent No. CN202305096
Date Issued: 2012-07-04
High-sensitivity optical fiber micro-range atmospheric pressure sensor
Inventor(s): XIAOLI QIN; SHENG LIANG; PENGYU ZHANG; DING YANG; MING LIU; JIANHUI LIU
Applicant(s): NEAR SPACE INST FOR AIRCRAFT SYSTEMS ENGINEERING; CN ACADEMY LAUNCH VEHICLE TECH
Application number: CN20112417471U 20111027
Priority number(s): CN20112417471U 20111027
Abstract: The utility model belongs to the field of a sensor, and particularly relates to a high-sensitivity optical fiber micro-range atmospheric pressure sensor. The utility model provides a high-sensitivity optical fiber atmospheric pressure sensor which is used for micro-range atmospheric pressure measurement and applied to the application requirements, such as space flight and aviation aircraft parameter identification and the like. The high-sensitivity optical fiber micro-range atmospheric pressure sensor specifically comprises an optical fiber circulator, a sensing unit, a photoelectric detector and optical fibers for connecting all components, wherein an optical fiber Bragg grating in the sensing unit is adhered to the surface of a vacuum box in a curve mode; external atmospheric pressure to be measured acts on the vacuum box, the vacuum box deforms under the action of the external atmospheric pressure to cause the optical fiber Bragg grating adhered to the surface to be subjected to homogeneous deformation so that the chirp rate of the optical fiber Bragg grating is modulated; and the variation of the chirp rate of the optical fiber Bragg grating causes the spectral width of a reflection spectrum to be changed, so that the luminous power is changed, and the variation of luminous power is extremely sensitive, so as to finally meet the requirements of the sensor on high sensitivity and micro-range atmospheric pressure measurement.


Patent No. CN102539099
Date Issued: 2012-07-04
Measuring device for 1400 DEG C high-temperature modal test of wing helm structure of hypersonic aircraft
Inventor(s): DAFANG WU; BING PAN; YUEWU WANG; BING SUN; LIMING ZHENG
Applicant(s): UNIV BEIHANG
Application number: CN2012123576 20120202
Priority number(s): CN2012123576 20120202
Abstract: The invention relates to a measuring device for a 1400 DEG C high-temperature modal test of a wing helm structure of a hypersonic aircraft. The measuring device comprises a test piece of the wing helm structure of the hypersonic aircraft, an L-shaped fixed bracket, a water-cooling pipeline, a silicon carbon infrared radiation array, an excitation source, a molybdenum force transfer rod, a molybdenum-rod guide bar, an acceleration sensor, a dual platinum rhodium thermocouple sensor, a computer and a high-temperature ceramic heat-insulating plate. When the test for the wing helm structure of the hypersonic aircraft is performed, the wing helm structure is heated by the silicon carbon infrared radiation array, and meanwhile, the excitation source is randomly vibrated, thereby forming an environment of a high-temperature thermal vibrating coupling test. The metal molybdenum-rod guide bar is directly mounted on the wing helm structure of the hypersonic aircraft; a vibrating signal of the wing helm structure of the hypersonic aircraft is transferred to a place beyond a 1400 DEG C high-temperature thermal field; a normal-temperature acceleration sensor is mounted at a cold end of the molybdenum-rod guide bar, so as to dynamically measure a thermal modal signal of the wing helm structure introduced into a normal temperature area; and the invention provides an effective dynamical high-temperature thermal modal test means for developing a hypersonic remote strategic aircraft.


Patent No. CN102724003
Date issued: 2012-10-10
Method for testing influence of plasma on characteristics of space communication signal
Inventor(s): RUNHUI WU; MIN XI; HONGYAN LIU; GANG MENG; JIAQI LIU; ZHEFENG YU; QING CHANG; ZHIYE JIANG; YIZHOU LI; HONGJIE LI; LEI YUAN; YONG XU; YULONG L
Applicant(s): BEIJING AEROSPACE INST OF THE LONG MARCH VEHICLE; CN ACADEMY LAUNCH VEHICLE TECH
Application number: CN20121122094 20120423
Priority number(s): CN20121122094 20120423
Abstract : The invention discloses a method for testing influence of plasma on the characteristics of a space communication signal. According to the method, the scheme of testing the influence of the plasma on the characteristics of a space transmission communication signal is designed; a comparison result of the modulated signal time domain characteristics, frequency domain (amplitude frequency and phase frequency) characteristics, demodulated and decoded eye pattern characteristics and constellation diagram characteristics of the space transmission communication signal which is transmitted in a plasma region and in a non-plasma region, and an error code counting result are given, wherein the electron density, collision efficiency and space size of the plasma region are invariables or variables; a test platform is provided for developing a ground verification test for the influence of the plasma which is in a vacuum state and has randomly-distributed characteristic parameters on the characteristics of the space transmission communication signal; and accurate measurement and data post-processing results are provided for analysis and rule summarization of the influence of the plasma in different characteristic parameter states on a ground simulation communication modulated signal transmission link.


Patent No. CN102447518
Date Issued:
Signal channel comprehensive processing method used under near space hypersonic velocity condition

Inventor(s): LIANG YANG; YONGQIANG QIN; ZHENGGUANG HE
Applicant(s): NEAR SPACE INST FOR AIRCRAFT SYSTEMS ENGINEERING; CN ACADEMY LAUNCH VEHICLE TECH
Application number: CN20111356261 20111110
Priority number(s): CN20111356261 20111110
Abstract: The invention belongs to the signal channel processing method and specifically relates to a signal channel comprehensive processing method used under near space hypersonic velocity condition and aims to simulate influence of bad change of physical environment to communication. In the signal channel comprehensive processing method, when the near space aircraft is communicating with a ground base, the signal channel processing of the two parties in the communication comprises free space attenuation, atmosphere attenuation, multipath effect, Doppler shift, spatial noise and plasma sheath layer signal channel; when the near space aircraft is communicating with a space base, the signal channel processing comprises space attenuation, spatial noise, multipath effect, Doppler shift and plasma sheath layer signal channel. The invention accurately simulates signal transmission state under near space complex environment, covers physical characteristics such as black-out area, rain attenuation, low angle of elevation and etc.


Patent No. CN102479269
Date Issued: 2012-05-30
Method for converting fluid load into solid load

Inventor(s): XIAOFENG WANG; JUNPENG HUI; JIANBIN WANG; TINGTING MA; QING GAO; DELI LIANG; HAO ZHANG; DAIMEI CHEN
Applicant(s): BEIJING NEAR SPACE AEROCRAFT SYSTEM ENGINEERING INST
Application number: CN20101565341 20101129
Priority number(s): CN20101565341 20101129
Also published as: CN102479269
Abstract : The invention relates to a method for converting a fluid load into a solid load. The method sequentially comprises the following steps of: 1, establishing a fluid field computing model; 2, establishing a solid computing model; 3, collecting the area of a stress surface; 4, establishing local coordinate systems; 5, establishing a transformation matrix among the coordinate systems; 6, obtaining solid structure units corresponding to pneumatic grid nodes; 7, obtaining a concentrated force; 8, establishing isoparametric units; 9, establishing a mapping relationship between the solid structure units and the corresponding isoparametric units; 10, establishing an area infinitesimal; 11, obtaining all node forces in the local coordinate systems according to a principle of minimum potential energy; 12, converting the node forces into an integral coordinate system; ; and 13, obtaining the node force of each solid structure unit. In the invention, according to the principle of minimum potential energy, the conversion from the fluid load to the solid load can be realized well, so that higher precision can be achieved and the method has a higher actual application value.


Patent No. CN101885380
Date issued: 2010-11-17
Asymmetrical design method for leading edge of hypersonic vehicle
Inventor(s): LURONG XIE; WEIXING WANG; RONGWEI GUO
Applicant(s): UNIV NANJING AERONAUTICS
Application number: CN20101225463 20100713
Priority number(s): CN20101225463 20100713
Abstract : The invention relates to an asymmetrical design method for the leading edge of a hypersonic vehicle, belonging to the technical field of hypersonic vehicles. The method is characterized by comprising design steps of a lip cover leading edge (1) and a compression surface leading edge (2). The design steps of the lip cover leading edge are as follows: making an auxiliary line perpendicular to a first form line and a fourth form line which are parallel to each other; chamfering the auxiliary line ant the first form line with RL=d to obtain an auxiliary arc; and chamfering the auxiliary arc and the fourth form line with rC to obtain a second form line and a third form line. The design steps of the compression surface leading edge are as follows: chamfering the compression surface leading edgeto determine a leading edge point; making an auxiliary line perpendicular to the angular bisector of the first form line and the fourth form line through the leading edge point; chamfering the first form line and the auxiliary line with rC to obtain a second form line; and chamfering the fourth form line and the auxiliary line with RC to obtain a third form line tangent to the second form line. Compared with a symmetrical configuration, rL/RL is greater than 0.06 and less than 0.2, and the peak value of heat flow of the lip cover leading edge is furthest decreased by 27.4 percent; and rC/RC is greater than 0 and less than 1, the total pressure recovery of a gas inlet channel is furthest increased by 11.6 percent, and the
capture flow is furthest increased by 6.29 percent.


Patent No. CN201877521
Date Issued: 2011-06-22
Automatic activation type lithium-sulphur battery pack
Inventor(s): LIXIA RONG; BIN LI; JUNPENG CUI; JINGHUI LAN; JUANJUAN CAO; HONGXIN JIN; MINGJIAN PAN
Applicant(s): BEIJING NEAR SPACE AIRCRAFT SYSTEM ENGINEERING RES INST
Application number: CN20102633824U 20101129
Priority number(s): CN20102633824U 20101129
Abstract: The utility model relates to an automatic activation type lithium-sulphur battery pack, comprising a shell, an electric connector positioned on the shell and a plurality of single lithium-sulphur battery bodies fixed at the lower part in the shell, and further comprising a liquid storage device fixed at the upper part in the shell, and a gas generator positioned in the shell and connected with the electric connector, wherein a gas outlet of the gas generator is connected with the liquid storage device in a sealing manner; the liquid storage device is internally provided with an inner bag containing electrolyte; the lower part of the inner bag is provided with a liquid outlet on which a sealing film is arranged in a sealing manner; the liquid outlet of the inner bag is connected with a liquid filling hole at the lower part of the liquid storage device in a sealing manner; the position at the lower part of the liquid storage device, which corresponds to the liquid filling hole, is provided with an electrolyte distributing groove; the electrolyte distributing groove is provided with liquid filling pipelines which are respectively connected into all the single lithium-sulphur battery bodies in the sealing manner; an exhaust hole is arranged at the upper part of each single lithium-sulphur battery body; and each single lithium-sulphur battery body is connected with the electric connector. In the automatic activation type lithium-sulphur battery pack, the influence of self charging on the storage period of batteries is overcome, so that the storage period can be prolonged to 5-8 years.


Patent No.CN102097622
Date Issued: 2011-06-15
Sulfur-containing composite anode material, anode plate and Li-S (lithium-sulfur) secondary battery and preparation method thereof

Inventor(s): KAI XIE; XIAOBIN HONG; SHIZHAO XIONG; LIXIA RONG; JUNPENG CUI
Applicant(s): NAT UNIV DEFENSE TECHNOLOGY; BEIJING INST OF NEAR SPACE VEHICLE S SYSTEM ENGINEERING
Application number: CN2011120323 20110118
Priority number(s): CN2011120323 20110118
Abstract : The invention discloses a sulfur-containing composite anode material which is of a core-shell structure, wherein a core is a C/S (carbon/sulfur) composite composited by utilizing elemental sulfur and nano conductive carbon black; and a shell is an organic polymer clad film layer containing a plasticizer. The preparation method comprises the following steps: mixing the sulfur and carbon and heating to obtain the C/S composite; adding an organic polymer solution; emulsifying and shearing the mixture; and finally filtering and drying. The invention further discloses an anode plate which comprises an aluminum current collector and the sulfur-containing composite anode material coated on the aluminum current collector.; The anode plate is prepared by ball milling and blending the sulfur-containing composite anode material with adhesives, a solvent and process additives, and printing or coating on the aluminum current collector. The invention also discloses a Li-S (lithium-sulfur) secondary battery which is formed by packaging a battery core and an electrolyte, wherein the battery core mainly comprises a cathode component, a polymer porous diaphragm and the anode plate. The cathode component comprises a lithium foil, and the electrolyte comprises an organic solvent and lithium electrolyte salts. The secondary battery disclosed by the invention has the advantages of high specific energy and good cycle performance.
 
Re: Iaotian-1, a Chinese hypersonic reentry demonstrator flown tested on 20/09/2013?

PLA military region where the flight-test allegedly happened.

The Hulun Buir region where Iaotian-1 Aotian-1 test flight allegedly happened is to be related to one of the People Liberation Army (PLA)'s 7 military regions (MR).
http://en.wikipedia.org/wiki/PLA_Military_Region

The only PLA MR matching the Hulun Buir geographical situation is the Shenyang Military Region (see attached wikipedia map)
http://en.wikipedia.org/wiki/Shenyang_Military_Region
http://en.wikipedia.org/wiki/File:Shenyang_Military_Region.svg

Air Bases associated to PLA's Shenyang MR

The number of potential sites where the test flight supposedly happened is limited to 30 Air Bases of interest including the Dingxin / Shuangchengzi AB which has a special missile testing unit.

C. Kopp (Australia) has issued a page / site / report cataloguing "over 200 military and dual use airfields". "It includes Google Earth KMZ files for air bases and civil airports where the identity of the base can be established with some confidence. As all data is open source, APA cannot guarantee that the data is comprehensive or up to date in every instance. The site will be updated as more open source data and high resolution imagery becomes available."

This resource might be of interest to any one with a wish to further investigation of Iaotian-1 /Aotian-1:

source: Dr Carlo Kopp, People's Liberation Army Air Force and Naval Air Arm Air Base Infrastructure, Technical Report APA-TR-2007-0103, 30/01/ 2007 (updates : 15/01/ 2011 ; 29/03/2012 ; 03/04/2012), http://www.ausairpower.net/APA-PLA-AFBs.html

In any case, Kopp's catalogue might be interesting to fact check any future revelation on Iaotian Aotian-1 whenever it ever gets official. If it ever gets…

A.
 

Attachments

  • 300px-Shenyang_Military_Region.svg.png
    300px-Shenyang_Military_Region.svg.png
    36.7 KB · Views: 506
Re: Iaotian-1, a Chinese hypersonic reentry demonstrator flown tested on 20/09/2013?

antigravite said:
The number of potential sites where the test flight supposedly happened is limited to 30 Air Bases of interest including the Dingxin / Shuangchengzi AB which has a special missile testing unit.

Dingxin is not in the same region.
 
Re: Iaotian-1, a Chinese hypersonic reentry demonstrator flown tested on 20/09/2013?

To admit I would agree that Dingxin AB is the most likely base even it is much more away from Russia and located in the Lanzhou MR.

By the way there are - at least officially - not that many operational bases and in regard to Carlo Kopp I would prefer my own "sources", since the map is wrong (Map from James Lawrence published in my book "Modern Chinese Warplanes" (Harpia Publ.), p. 123)

Deino
 

Attachments

  • Dingxin AB.jpg
    Dingxin AB.jpg
    123.5 KB · Views: 55
Re: Iaotian-1, a Chinese hypersonic reentry demonstrator flown tested on 20/09/2013?

Thx alot Deino.

BTW, at the time when the search begins for this "new" Chinese spaceplane, and I feel being not alone in this quest, counterpoints are worth reading, just to keep both feet on the ground. Years ago, the Shenlong / Divine Dragon affair broke many stories. Most of them built one upon another, iterated in closed loops and auto-citations. Whatever leak / weak signal shows up today, it is always tempting to believe in what we wished were existing while trying to connect the dots. Alas, the full-frame reality picture often happens to be less glamorous.

In that respect, the following article is worth reading:

Laura Grego (Senior Scientist), "Claims About China's Space Plane unconvincing", Union of Concerned Scientists, 07/12/2012
http://allthingsnuclear.org/claims-about-chinas-space-plane-unconvincing/

That post is by no means intended to be a showstopper - quite the opposite. It just aims at making sure we walk the right path along this snarkfullish journey currently called Iaotian-1 Aotian-1.

A.
 
Re: Iaotian-1, a Chinese hypersonic reentry demonstrator flown tested on 20/09/2013?

Deino said:
By the way there are - at least officially - not that many operational bases and in regard to Carlo Kopp I would prefer my own "sources", since the map is wrong (Map from James Lawrence published in my book "Modern Chinese Warplanes" (Harpia Publ.), p. 123)

There do appear to be way more airbases out there than are accounted for in the PLAAF or PLANAF's ORBATs. Carlo and I built that article and one on airfield UGFs from a massive KML I put together showing airbases in China. If you plot the bases with "known" operational units, there are still a whole mess of airfields out there you'd be missing. Are they all necessarily operational? Probably not, although I did make an effort to mark bases known to be non-operational separately.
 
Re: Iaotian-1, a Chinese hypersonic reentry demonstrator flown tested on 20/09/2013?

Thanks and I agree with You that there are indeed many, many more airbases out there in China, but by looking at operational ones would narrow down the hunt for this unknown base.
There problem behin that - and You mention it - is that I indeed cncentrated only on the operational ones directly assigned to a known regiment/division .... to add the non-operational ones too would have made this map even more confusing.

However - and here You surely know the material much better than me - in line of the recent developments like urban development several bases were simply given up or transferred to the civil authorities and as such "to mark bases known to be non-operational separately" would be quite usefull since many of then will never return to operational status again.

Deino
 
Re: Iaotian-1, a Chinese hypersonic reentry demonstrator flown tested on 20/09/2013?

Deino said:
to add the non-operational ones too would have made this map even more confusing.

Oh, I was in no way trying to disparage your work! The info you chose to present is perfectly logical and fits the material just fine. My point is just that there are a ton of airfields out there that aren't necessarily going to have known operational units associated with them, and that one of them might be the culprit we're looking for here as they're far easier to overlook.
 
Re: Iaotian-1, a Chinese hypersonic reentry demonstrator flown tested on 20/09/2013?

Picture extracted and post-processed by [Henri K.] -- aka [Elixir], acting like an informal defense and aerospace-related chinese news information agency --, from a CALT (movie) presentation celebrating this organization's 55th birthday. CALT was established in 1957.
This striking image thus dates back to 2012 at the latest; I changed the picture name prior uploading it here. Quite unexpectedly, this picture was initially posted in one of the many Chinese sections of the French "Forum de la Conquete Spatiale"

A.
 

Attachments

  • CALT-reentry-vehicle.jpg
    CALT-reentry-vehicle.jpg
    21.9 KB · Views: 470
Re: Iaotian-1, a Chinese hypersonic reentry demonstrator flown tested on 20/09/2013?

antigravite said:
Picture extracted from a CALT (movie) presentation celebrating this organization's 55th birthday.
CALT was established in 1957.
This striking image thus dates back to 2012 at the latest.

A.

Strikingly similar to Glushko's MTKVP.

More here: http://falsesteps.wordpress.com/2012/10/06/mtkvp-glushkos-opening-gambit/

A.

Attached is Mark Wade (astronautix.com) draft of MTKVP © Mark Wade
 

Attachments

  • mtkvp1.jpg
    mtkvp1.jpg
    14.1 KB · Views: 64
Re: Iaotian-1, a Chinese hypersonic reentry demonstrator flown tested on 20/09/2013?

It seems the actual project name is "AOTIAN-1", not IAOTIAN-1 as initially suggested by [Henri K] on a well-known French astronautics forum. Incidentally, it happens that the initial apparent misspelling of "IOATIAN-1" enables a fairly accurate and easy tracking of how information percolates and flourishes on the web, based on a good understanding of how recent updates of google Panda + Pinguin SEO engine suites actually work.

:)

A.


PS note added Nov.26, 2013 for those interested in SEO wishing to understand how google affects its Panda, Pinguin, Hummingbird and Zebra (?) engines, please take a look at these smartly informed infographics.
- http://www.smartinsights.com/search-engine-optimisation-seo/seo-strategy/seo-changes-in-2012-infographic/
- http://www.ben-norman.co.uk/blog/seo/seo-checklist-for-2013-infographic/
- http://moz.com/google-algorithm-change
Latest known algorithm change: October 3, 2013
 
Re: Iaotian-1, a Chinese hypersonic reentry demonstrator flown tested on 20/09/2013?

Notes on CALT

CALT (Chinese Academy of Launch vehicle Technology) was founded in 1957 and was then known as the "1st Academy".

Organization names / aliases
  • First Academy of the China Aerospace Corporation (CASC)
  • Chinese Academy of Launch Vehicle Technology
  • China Carrier Rocket Technology Research Institute
  • China Launching Vehicle Technology Research Institute
  • Aerospace 1st Academy
Main research / production facilities

The list would be too long boring in the present context. Of key interest are:
  • Center of Research and Development
  • Beijing Institute of Aerospace System Engineering
  • Beijing Institute of Near Space Flight Vehicle Systems Engineering (10th Research Institute)
  • Beijing Aerospace Automatic Control Institute
  • Beijing Institute of Space Launch Technology
  • Beijing Aerospace Institute for Metrology and Measurement Testing
  • Beijing Institute of Structure and Environment Engineering
  • Aerospace Research Institute of Materials and Processing Technology
CALT website

http://www.calt.com/


A.
 
Hi there,

Worth reading again today, a 2006 Flight magazine article by Rob Coppinger reporting that CALT unveiled its RLV roadmap at the International Astronautical Congress (IAC) in Valencia, Spain. If any september 20, 2013 flight test event ever happened, it might be somewhat described by this roadmap, even if actual details slightly differ.

The article reads: « "We don't have an official schedule for the programme, but the first generation could be developed in 15 years," says CALT research and development centre manager Yong Yang. He says CALT expects to conduct a Mach 15 re-entry demonstration flight using a winged upper stage that will be launched to an altitude of 100km (62 miles). Another planned demonstration is an automatic flight and landing test to prove guidance, navigation and control systems. No dates have been provided for these tests.»

source: Rob Coppinger, "First RLV by 2020?", Flight, 17/10/2006
http://www.flightglobal.com/news/articles/first-rlv-by-2020-210002/

A.
 
More recently, David Axe (he was the key journalist behind Danger Room Blog at Wired.com), published a series of related material:

(1) David Axe, "Is China Building a Space Plane to Rival America's?", War is Boring, 31/01/2011
http://www.warisboring.com/2011/01/31/is-china-building-a-space-plane-to-rival-americas/

This article questions Shenlong's atmospheric flight test "rumors", and critically reviews material found here:
http://www.suasnews.com/2011/01/3610/russians-and-china-said-to-be-working-on-their-own-x37-type-craft/

(2) David Axe, "China's Divine Space Plane", The Diplomat, 07/05/2012
http://thediplomat.com/flashpoints-blog/2012/05/07/china’s-divine-space-plane/

Also see:
David Axe, "China Developping a Reusable Spaceplane?", China Defense Mashup, 05/08/2012*
http://www.china-defense-mashup.com/china-developing-a-reusable-space-plane.html
* "China Military News cited by the Diplomat and David Axe"

A.
 
Why would Mi-26 be involved in/for Aotian-1 flight test?
Considering the first rash of information available on weibo's blog, the september 20, 2013 flight test involved one russian-made Mi-26 heavy lift helicopter. China started to use Mi-26 in 2007 and purchased a couple of them in 2008 (see below). These helicopters have a payload capacity of 20 metric tons, and a maximum take-off weight of 56 metric tons with a ceiling of 4500 m. As such, the september 20, 2013 Aotian-1 flight test might have only been the first successful drop test, from a conservative ceiling figure of 4000m of a vehicle, for a final, unpowered glide (?), approach and landing test (ALT). The maximum weight of the test vehicle would have to be less then 20 t anyway. Nice. Hefty.

Mi-26 general characteristics
A Mi-26 dedicated wikipedia page details its the vehicle history, variants, characteristics
http://en.wikipedia.org/wiki/Mil_Mi-26
  • Crew: Five– 2 pilots, 1 navigator, 1 flight engineer, 1 flight technician
Capacity:
  • 90 troops or 60 stretchers
  • 20,000 kg cargo (44,090 lb)
  • Length: 40.025 m (131 ft 3¾ in) (rotors turning)
  • Rotor diameter: 32.00 m (105 ft 0 in)
  • Height: 8.145 m (26 ft 8¾ in)
  • Disc area: 804.25 m2 (8,656.8 ft²)
  • Empty weight: 28,200 kg (62,170 lb)
  • Loaded weight: 49,600 kg (109,350 lb)
  • Max. takeoff weight: 56,000 kg (123,450 lb)
  • Powerplant: 2 × Lotarev D-136 turboshafts, 8,500 kW (11,399 shp) each
Performance
  • Maximum speed: 295 km/h (159 kt, 183 mph)
  • Cruise speed: 255 km/h (137 kt, 158 mph)
  • Range: 1,920 km (1,036 nmi, 1,190 mi)(with auxiliary tanks)
  • Service ceiling: 4,600 m (15,100 ft)
Mi-26 variants
Below are all known variants of the Mi-26 according to wikipedia's above reference.
It would be interesting to determine which type(s) of Mi-26 was purchased by China, ands which was used during the september 20, 2013 flight test.
  • Mi-26: Military cargo/freight transport version. NATO name: 'Halo-A'.
  • Mi-26A: Upgraded version with an upgraded flight/navigation system.
  • Mi-26M: Upgraded version of the Mi-26; designed for better performance.
  • Mi-26MS: Aeromedical evacuation version.
  • Mi-26NEF-M: Anti-submarine warfare version.
  • Mi-26P: Passenger transport version, with accommodation for 63 passengers.
  • Mi-26PP: Radio relay version.
  • Mi-26PK: Flying crane helicopter.
  • Mi-26S: Disaster relief version.
  • Mi-26T: Civil cargo/freight transport version.
  • Mi-26TC: Cargo transport version.
  • Mi-26TM: Flying crane helicopter.
  • Mi-26TP: Fire-fighting version.
  • Mi-26TC: Export version of the Mi-26T.
  • Mi-26TZ: Fuel tanker version.
  • Mi-26T2: Improved version of the Mi-26T equipped with BREO-26 airborne electronic system, allowing it to fly any time, day or night, under good and bad weather conditions.
Mi-26 studied for potential role during Soviet Buran space shuttle program
Mi-26 was a brand new helicopter when it was explored as a possible means of transportation for the soviet Buran space shuttle. "The developers of the Buran space vehicle programme considered using a couple of Mi-26 helicopters to "bundle" lift components for the Buran spacecraft, but test flights with a mock-up showed how risky and impractical that was."
source: http://en.wikipedia.org/wiki/Mil_Mi-26#Buran_programme
quoting: Dr. Fedotov, V.A. "BURAN Orbital Spaceship Airframe Creation". Buran Energia. Retrieved 22 January 2013
http://www.buran-energia.com/documentation/documentation-akc-air-transportation.php

This type of use seems to be fairly risky for an operational use, and thus not applicable to understanding the Aotian-1 flight test.

Reminder about Mi-26.
On 05/11/2008, People's Daily Online News issued an article on China's then recent acquisition of two Mi-26 on the occasion of the Zhuhai 2008 airshow. Until then, "[T]he China Flying Dragon Special Aviation Company introduced the first Mi-26 helicopter in China in 2007 through a leasing arrangement. The company has now purchased it outright. The handover of the property rights was finalized at today’s ceremony,” said an official of China National Aero-Technology Import & Export Corporation.” This online article read that "The second Mi-26 helicopter in the purchase agreement will be primarily used for forest fire protection in Northeast China,” he was quoted as saying.

source : Anon, "China buys Mi-26 heavy-lift helicopters", People's Daily Online, 05/11/2008, http://english.people.com.cn/90001/90776/90786/6528121.html

A.
 

Attachments

  • 400px-Mil_Mi-26_Line_Drawing.svg.png
    400px-Mil_Mi-26_Line_Drawing.svg.png
    23.9 KB · Views: 385
China JF-12 Shockwave Hypersonic Wind Tunnel / 中国航天

18/07/2010
Jul.18 (China Defense Mashup News) -- Chinese Inner Mongolia North Heavy Industries Group recently announced that the group has successfully provided the key element of "JF12 Shockwave Hypersonic wind tunnel", which is the most advanced and creative project in
world Hypersonic research area.
"JF12 Shockwave Hypersonic wind tunnel" is being constructed for the initiation of China's future spaceplane project. JF12 Windtunnel is mainly designed by the Institute of Mechanics, CAS (Chinese Academy of Science). CAS found a creative detonation driven method to design a shock tunnel which can provide a reproducible flight condition for hypersonic research.

Source: "China Builds Hypersonic Wind Tunnel to build spaceplane", 18/07/2010
http://www.china-defense-mashup.com/china-builds-hypersonic-wind-tunnel-to-develop-spaceplane.html
Youtube video on the JF-12 hypersonic shock wave facility

A.
 

Attachments

  • 20120903045808665.jpg
    20120903045808665.jpg
    57.1 KB · Views: 345
  • 27_262268_1dad2b2f0481410.jpg
    27_262268_1dad2b2f0481410.jpg
    39.3 KB · Views: 358
  • 27_262268_21b9c1b2b99db24.jpg
    27_262268_21b9c1b2b99db24.jpg
    81.8 KB · Views: 374
Still trying to connect the dots… In the article below, CAS stands for "Chinese Academy of Science".


Qian Xuesen (11/12/11-30/10/09) was the father of the Chinese Space program. On June 12, 2009, CAS set up a "Qian Xuesen National Engineering Science Experiment Base". There seems to be a relation between this "Experiment Base" and hypersonic research. A simple googlesearch leads to a recently published paper (02/09/2013) by Michael Raska, Research Fellow at the Institute of Defence and Strategic Studies (IDSS), a constituent unit of the S. Rajaratnam School of International Studies (RSIS), Nanyang Technological University in Singapore. Quoting M. Raska:

"Hypersonic Vehicle Technology Project:
While data on China’s hypersonic research remains scarce, there are signs that China is developing conceptual and experimental hypersonic flight vehicle technologies such as hypersonic cruise vehicles (HCV) capable of manoeuvring at Mach 5 speeds (6,150+ km/h), and flying in near-space altitudes. Andrew Erickson, Associate Professor at the US Naval War College, analysed China’s Shenlong (Divine Dragon) spaceplane project, including its apparent test flight in 2011 and noted subsequent profusion of Chinese research articles on the subject. Similarly, Mark Stokes from the Project2049 Institute identified new research institutes focusing exclusively on the design and development of hypersonic test flight vehicles, including the 10th Research Institute also known as the Near Space Flight Vehicle Research Institute, under the China Academy of Launch Technology (CALT) - China’s largest entity involved in the development and manufacturing of space launch vehicles and related ballistic missile systems. The Qian Xuesen National Engineering Science Experiment Base in Beijing’s Huairou district is also one of China’s key HCV research centres."

source: Michael Raska (for RSIS), "China's (Secret) Civil-Military Megaprojects", RSIS Commentaries, No.163/2013, 02/09/2013 http://www.rsis.edu.sg/publications/Perspective/RSIS1632013.pdf?utm_source=getresponse&utm_medium=email&utm_campaign=rsis_publications&utm_content=RSIS+Commentary+163%2F2013+China’s+

... also available from here: http://www.nationmultimedia.com/opinion/China-expands-its-secret-civil-military-projects-30214208.html


Another article was recently published in the same "spirit" targeting a much wider audience (Popular Science):
Peter W. Singer (Director 21st Century Defense Initiative, Senior Fellow in Foreign Policy at the Brookings Institution), "Inside China's secret arsenal", Popular Science, December 2012, accessed online from:
http://www.popsci.com/technology/article/2012-12/inside-chinas-secret-arsenal

These papers occasionally balance and comment little piece of news regularly published on Chinese internet "source" such as:
"On September 3, 2013, Huanqiu, the Chinese edition of Global Times, published an article titled, “China Works on Three Big, Secret Military Projects? Divine Light and High Energy Weapons.” China’s National High-Tech Research and Development Program (the 863 Program) has vigorously worked on three types of mysterious military and civil dual-use high-tech research and development projects: 1) high power laser weapons development; 2) hypersonic aerobatic technology; 3) the 2nd generation “Beidou” satellite navigation system."

Source: LYW & AEF, "Huanqiu: China Works on 3 Big Secret Military Projects", Chinascope, 04/09/2013, http://chinascope.org/main/content/view/5758/105/ quoting: Huanqiu, 03/09/2013, http://mil.huanqiu.com/paper/2013-09/4314480.html

- - - - - - - - - - - - - - - - - - - - - - - - - - -

CAS original press information release

CAS Launches Mega Mechanical projects in Beijing
The Institute of Mechanics (IMECH), Chinese Academy of Sciences has set up "Qian Xuesen National Engineering Science Experiment Base" in Beijing's Huairou District on June 12th.
Meanwhile, two national major projects for science and technology development ---- "Large Scale Oil-gas Field and Coal-bed Gas Developing Projects--" launch here as well as a "National Aerodynamics Research Item on High-speed Train".
On completion of the base, the two projects and aerodynamics program undertaken by IMECH will lead research of China's self-made mega experimental equipments and development of supporting testing techniques. Research, development and testing of related prototypes of the projects will also be the focus of the base.
Qian is one of the pioneers of China's space science. A world- famous expert on aerospace rockets and aerodynamics, Qian has obtained great attainments in the areas of applied mechanics, engineering cybernetics and system engineering and made distinguished contributions to the foundation and development of Chinese aerospace undertaking. He plays a leading role in the research, manufacture and testing of carrier rockets, guided missiles and satellites.

source: Anon., "CAS Launches Mega Mechanical projects in Beijing", Chinese Academy of Science, 17/06/2009 http://english.cas.cn/highlight/200906/t20090617_19221.shtml

A.
 
Project 869: CALT Tianjiao-1 proposal and Aotian-1. . . . . . . . ..... connecting the dots?

Early information on Aotian-1 hinted at some sort of connection between this vehicle and the US Dream Chaser project. As already stated, we could even go back 50 years earlier and start this story with Gleb LL's SPIRAL program... Let's call this the hypothetised form factor.

One possible lead was given in mid-2011 by Richard D. Fisher, a well-known US analyst with an expertise in Chinese affairs.

Ready? Let's go.


In the summer of 2011, R.D. Fisher released a series of slides presenting his vision and understanding of the Chinese Space Plane program, which I'm sure could have been better dressed into subtlety. Fisher's presentation bears some interest today as it explores the connection between state project 863 and manned / RLV efforts. Quoting Fisher's study: "At about the same time [1986] the Air Ministry, sensing opportunity, starts its “869 Project” which advances space plane concepts to meet the goals of the 863 Program. This preference reflects their desire to compete with U.S., Soviet, French and Japanese space plane programs. A key Chinese historical article* about this period makes clear that the Air Ministry was guided in particular by the military potential of space planes, to include consideration of space combat missions."

The historical article of interest wherein key information was extracted from, is: Li Chengzi and Zheng Xiaoqi (Beijing University of Aeronautics and Astronautics), “The Debate Over Placing Priority on the Space Shuttle or Manned Spacecraft During Consideration of China’s Manned Space Program,” Science and Technology Review, Submitted August 2009.

One slide of interest details CALT's "Tianjiao-1" proposal for project 869: a 20-25 t mini-shuttle launched atop a carrier-rocket. The original vehicle's basic aerodynamic shape is very classical. However, a later (2009) conference artwork (see picture) shows what may have been flown tested on september 20, 2013. Quoting R.D. Fisher again: "Possible lifting body based derivative featured in artwork for 2009 Chinese conference."

source: Richard D. Fisher, "China's Space Plane Program", International Assessment & Strategy Center, strategycenter.net, 24/08/2011,

http://www.strategycenter.net/docLib/20111024_ChinasSpacePlaneProgram.pdf

Images speak for themselves.

Let me be clear, however. The connection between RD Fisher's interpretation of Tianjiao-1 and the "2009-Chinese-HL_20-lifting_body-conference-artwork-picture" (sorry guys for this expression), still needs to be clarified. Until now, the connection still is an unproven hypothesis.

Thus if anyone could pass on this message to R.D. Fisher, with whom I never met, that's be great: Dear mister Dick Fisher, would you please actually connect the dots to get a better understanding. The connection between Tianjiao-1 and the 2009 artwork is not proven, just an overworn argument of authority. I'm sure this message will edge its way through…

:) :p ::) ;) ;D

A.


PS) Phrasal verbs are not my cup of tea
 

Attachments

  • RDFisher-201108-chinese-space_plane-study-Tianjiao1.jpg
    RDFisher-201108-chinese-space_plane-study-Tianjiao1.jpg
    42.9 KB · Views: 94
antigravite said:
One slide of interest details CALT's "Tianjiao-1" proposal for project 869: a 20-25 t mini-shuttle launched atop a carrier-rocket. The original vehicle's basic aerodynamic shape is very classical. However, a later (2009) conference artwork (see picture) shows what may have been flown tested on september 20, 2013. Quoting R.D. Fisher again: "Possible lifting body based derivative featured in artwork for 2009 Chinese conference."

source: Richard D. Fisher, "China's Space Plane Program", International Assessment & Strategy Center, strategycenter.net, 24/08/2011,

http://www.strategycenter.net/docLib/20111024_ChinasSpacePlaneProgram.pdf

This figure matches with the payload performance of a Russian-made Mi-26 helicopter for either a drop test or crane takeaway on a desert airfield after drop testing from a modified Il-76. Maybe we should look into that, too.

As a result, Aotian-1 weight would fare a maximum 20 t, not 25 t. Maybe the weight envelope was downsized to 20 t sometimes during the program, as a consequence of iterative AOA studies in the design engineering process, taking into account both China's "future launcher" performance capabilities AND performances of available vehicles required to test the vehicle. To my understanding, allocating resources to develop -- as part of a separate, parallel program -- a new helicopter capable of lifting 25 metric tons would take too much time, add up risks. And the market for this new "would-be" would nichy, if not purely experimental. Chinese people are very pragmatic. Easier to buy and old working model from Russians. Less expensive. Enabling fast track effort.

:)

A.
 
Re: Iaotian-1, a Chinese hypersonic reentry demonstrator flown tested on 20/09/2013?

SOC said:
antigravite said:
The number of potential sites where the test flight supposedly happened is limited to 30 Air Bases of interest including the Dingxin / Shuangchengzi AB which has a special missile testing unit.

Dingxin is not in the same region.

Well... I'm not sure this is the one we're looking for. But thx for the piece of information, since this would be a likely place of choice to flight-test any future reusable aerospace vehicle: just a few miles away from Jiuquan space launch center! What may lack is a long, long, long runway.

Special to SPF member, wild bunch of information:
  • General "Dingxin airbase, located in north central China near the Shuangchengzi missile test range, is home to a great deal of PLAAF flight test efforts. Pockmarked terrain and targets marked in the desert indicate that among other things, Dingxin is home to weapons integration testing.
  • Nearby cities: Jiuquan, Jiayuguan City , Zhangye
  • Coordinates: 40°24'6"N 99°47'29"E
Thx for looking.

A.
 

Attachments

  • Dingxin-SC.png
    Dingxin-SC.png
    1.1 MB · Views: 52
  • Jiuquan.png
    Jiuquan.png
    1.1 MB · Views: 53
BTW, for those newbies who come and go and revisit those Aotian-1 pages, be kind enough to revisit them even more regularly as I keep modifying my already posted texts to make sure I always get more accurate.

:p

A.


PS) I also correct my typees typos.
 
antigravite said:
It would be interesting to determine which type(s) of Mi-26 was purchased by China, ands which was used during the september 20, 2013 flight test.

Short anwer: Mi-26TC "Halo".
Around 300 variants and subvariants have been produced since it first flew on december 14th, 1977 in Russia (prototype). This helicopter was declared operational in 1986. As of today, and to the best of my understanding, China is currently using 3 (three) Mi-26TC. In 2010, purchasing a 4th one, was also considered. It is also my understanding that some sort of joint venture later promoted the (seemingly ongoing) joint development of a 33t heavy lift helicopter.

- - - - - - - - - - - -

"In March 2010 Rostvertol plc and Lectern Aviation Supplies Co. Ltd (China) signed a contract on delivery of a new Mi-26Tc helicopter to China. This is already the third Mi-26TC sold to the People’s Republic of China. The same as the first two helicopters the third Mi-26TC is being purchased mainly for extinguishing fires and liquidating consequences of emergency situations. The cooperation between Rostvertol plc and Lectern Aviation Supplies Co. Ltd is lasting for more than five years since the Rostov enterprise entered the Chinese market. In April 2006 during the visit of the Rostvertol plc specialists to China and agreement was signed between Rostvertol and Lectern Aviation on establishing a joint Russian- Hong Kong enterprise. In October 2006 such an enterprise was established – Rostvertol Helicopters China Limited – what substantially helped in promotion of the Rostvertol plc products in China. The first Mi-26TC (certified modification of the Mi-26T) was obtained by China Flying dragon Special Aviation Company in May 2008. Initially, in 2007, the helicopter was handed over for lease for a 3-years period, however the Mi-26TC showed its worth in extinguishing serious fires in the Chinese provinces, in transporting bulky cargoes and in liquidating consequences of earthquakes, and China Flying Dragon bought it out before the lease term expired. In November 2008 during the international air show China’2008 a contract on sale of the second Mi-26TC to the Chinese air carrier Qindao Helicopters Special Aviation Co. was signed. The helicopter was delivered to China in July 2009 where it is successfully used for extinguishing fires and liquidating consequences of emergency situations."

Source: Rosvertol (but bolds are mine)

- - - - - - - - - - - -

Mi-26T and certified Mi-26-TS ("low maintenance helicopter" which can be "serviced in field conditions") operate in the country, as highlighted by Russian Helicopters ("Rosverto"l) CEO Dimitry Petrov.

source: Dimitry Petrov interview, "We work Closely with our clients", Take Off Magazine, 24/05/2013, http://www.russianhelicopters.aero/en/press/publications/4412.html?sphrase_id=22428,

- - - - - - - - - - - -

I still have no clue yet where any of these Mi-26TCs are kept in PRC.
Is there a suggested spotter community suggestion?

A.
 
Beyond future alphanumerics: Aotian-1, Aotian-2... Aotian-10000?

Needless to say, the very fact there is a project or vehicle code-named Aotian-1 (遨天1号) implies that sometimes in the future another vehicle/project/whatever will show-up bearing another incremented figure name: Aotian-2 (遨天2号), possibly Aotian-3 (遨天3号), possibly Aotian-4 (遨天4号), Aotian-5 (遨天5号), and I could raise the bar till infinite, say... Aotian-10000 (遨天10000号) but it'd take too much time. For all those who wonder, I am not privileged to any information: what I'm saying is just based on pure logic. And yes indeed, that is super logic, n'est-ce pas? Future Aotian birds will either be a limited series of Incremental performance Growth Vehicles OR a full fleet of separate vehicles. Only time will tell.

:)

A.
 
antigravite said:
antigravite said:
It would be interesting to determine which type(s) of Mi-26 was purchased by China, ands which was used during the september 20, 2013 flight test.

Short anwer: Mi-26TC "Halo".
Around 300 variants and subvariants have been produced since it first flew on december 14th, 1977 in Russia (prototype). This helicopter was declared operational in 1986. As of today, and to the best of my understanding, China is currently using 3 (three) Mi-26TC. In 2010, purchasing a 4th one, was also considered. It is also my understanding that some sort of joint venture later promoted the (seemingly ongoing) joint development of a 33t heavy lift helicopter.
.
.
.
[snip]
.
.
.
I still have no clue yet where any of these Mi-26TCs are kept in PRC.
Is there a suggested spotter community suggestion?

A.

There is indeed a dedicated spotter community forum with an expertise in helicopters, and jets, and any flying honeyjunk you wanna know about: http://jetphotos.net
This is where an 18-member (as of today - please check out this post date) self-proclaimed "China Aviation Spotter Group" (CASG) operates with the following relevant link:
http://jetphotos.net/members/viewgroup.php?id=61

Incidentally, this is where Chinese Mi-26TC "Halo" tail code numbers (identifiers) and pictures can be found in plain sight.

The 1st Chinese Mi-26TC "Halo" operated by China Flying Dragon Airline, is serialled B-7802 (tail code) with CN registration number #34001212619. Dressed in red, its main mission is firefighting and disaster relief operations.
http://jetphotos.net/showphotos.php?cn=34001212619

2nd Chinese Mi-26TC "Halo" operated by Qingdao helicopters, is assigned tail code B-7803 with CN registration number #34001212620
http://jetphotos.net/showphotos.php?cn=34001212620. It is painted orange with grey on the underside.
http://pic.feeyo.com/posts/556/5566701.html

3rd Chinese Mi-26TC "Halo" was flown to China on October 14, 2010 and delivered to Lectern Aviation Supply on Monday Nov 15, 2010. It is assigned tail code B-7807. Painted red like its predecessor Mi-26TC / B-7802, its primary mission is firefighting and disaster relief operations.

These hellos still rely on old style cockpit design, and do not use the BREO-26 glass cockpit available for Russian Mi-26T2.

A.
 
antigravite said:
antigravite said:
antigravite said:
It would be interesting to determine which type(s) of Mi-26 was purchased by China, ands which was used during the september 20, 2013 flight test.
.
.
.

3rd Chinese Mi-26TC "Halo" was flown to China on October 14, 2010 and delivered to Lectern Aviation Supply on Monday Nov 15, 2010. It is assigned tail code B-7807. Painted red like its predecessor Mi-26TC / B-7802, its primary mission is firefighting and disaster relief operations.
.
.
.
A.


Attached is an official photo of Mi-26TC B-7807 released in November 2010 when it was officially transferred to China. What distinguishes it from B-7802 is the "black area" on its sides.

A.
 

Attachments

  • B-7807_IMG_6545.jpg
    B-7807_IMG_6545.jpg
    33.3 KB · Views: 653
antigravite said:
Attached is an official photo of Mi-26TC B-7807 released in November 2010 when it was officially transferred to China. What distinguishes it from B-7802 is the "black area" on its sides.

A.

... which is what makes it so... interesting!

Attached is a picture posted on Panoramio -- BTW a great site-- taken by [ferrari575] in february 2011 at Hulun Buir Hailar Airport (呼伦贝尔海拉尔机场), just one month after this airport was renamed (it was formerly called Hailar DongChang Airport). Worth noticing is Mi-26TC "Halo" B-7807 on site.

http://www.panoramio.com/photo/48413355

While this may be a great starting point, this by no means implies that:
  • any such helicopter was on site on september 20, 2013;
  • Aotian-1's alleged flight-test happened;
  • Aotian-1's alleged flight-test happened in Hulun Buir (region);
  • Aotian-1's alleged flight-test happened at Hailar airport;
A.
 

Attachments

  • 48413355-1.jpg
    48413355-1.jpg
    57.6 KB · Views: 644
Re: Iaotian-1, a Chinese hypersonic reentry demonstrator flown tested on 20/09/2013?

Deino said:
To admit I would agree that Dingxin AB is the most likely base even it is much more away from Russia and located in the Lanzhou MR.

By the way there are - at least officially - not that many operational bases and in regard to Carlo Kopp I would prefer my own "sources", since the map is wrong (Map from James Lawrence published in my book "Modern Chinese Warplanes" (Harpia Publ.), p. 123)

Deino

Thx again Deino. I found an interesting map which maybe useful as a complementary tool.
http://bbs.nmglyj.com/bbs/attachments/month_1009/1009031658473fd7b0af6ead31.jpg

It is related to Hunlun Buir's Hailar airport / airlines, drawing good connections.
http://en.wikipedia.org/wiki/Hulunbuir_Hailar_Airport

A.
 

Attachments

  • 1009031658473fd7b0af6ead31.jpg
    1009031658473fd7b0af6ead31.jpg
    1.1 MB · Views: 645
Looking for sources of inspiration. The 2009 conference background poster "identified" by Richard D. Fisher, seems to be heavily inspired by an earlier OSC-NASA artwork commissioned for illustrating the Orbital Space Plane (OSP) program. While this US program "folded", the winged body orbital space plane* concept was later (2010) revived by OSC (it was then renamed Prometheus).

A.


*Post edited to correct some typos. The first version of this post mistakenly used the expression "winged bidy aerospace plane". I was definitey exhausted when I wrote it. Now fixed!
 

Attachments

  • 2009_image-possible-inspiration.jpg
    2009_image-possible-inspiration.jpg
    32.7 KB · Views: 449
Don't bother:
http://ca.search.yahoo.com/search;_ylt=A0geu8KKDotSWDEAR3fqFAx.?p=Henri%20Kenhmann%20China&fr=spigot-yhp-ie&fr2=sfp&type=937811
It is clear based on his history of posting that `Henry Kenhman` is nothing more than a propaganda organ from the Chinese military simply using a fake French name on the internet to publish (pretend to 'leak') infos on Chinese military programs (their favorite method, go figure why...).
Like, ya... what are the odds that a `French blogger' interested in the Chinese military and space programs would write posts on both Pakistani army and Indian aerospace forums... Ahem... (both are mutually excluding when it comes to the Chinese military programs)(just follow those for long enough counting the number of insults traded online to get yourself a headache and you will get the idea).
And besides, if he was a French aerospace buff, he would definitely not be posting at the right places. Never saw anything by someone using his name or nicknames on any of the forums i frequent. I would recommand he tries the Nasa Spaceflight Forum, then he might get an real audience (or get himself sidelined or kicked out of there real quick when they would find out his game).
 
Recently published, related information of interest (JDW, october 2013) O F U T M O S T I M P O R T A N C E

"China is also pursuing a manned space shuttle programme, according to China Aerospace Science and Industry Corporation chairman Gao Hongwei. Gao was speaking on 25 September at the 64th International Astronautical Congress (IAC) in Beijing."

[snip]

"Prior to Gao's 25 September statement the most substantive revelation about China's space shuttle ambitions was made at the 2006 IAC, when two engineers from the China Academy of Space Launch Vehicle Technology described two space plane concepts."

[snip]

"Other Chinese sources have indicated that the Chengdu Aircraft Corporation was heavily involved in designing the small Shenlong suborbital space plane technology demonstrator and may be equally involved in follow-on space place programmes. Shenlong is similar in size to the Boeing X-37B and has made at least one suborbital test flight, according to Chinese reports that were confirmed by a Russian source."

source: Richard D. Fisher, "Chinese, US, Russian shuttle concepts suggest start of three-way space race", Oct 7, 2013, JDW, http://www.janes.com/article/28083/chinese-us-russian-shuttle-concepts-suggest-start-of-three-way-space-race

A.
 
antigravite said:
Looking for sources of inspiration. The 2009 conference background poster "identified" by Richard D. Fisher, seems to be heavily inspired by an earlier OSC-NASA artwork aimed at illustrating the Orbital Space Plane (OSP) program.
.
.
.
"Finders Keepers and I found it!" (and their brothers too). Yep, picture taken on November, 14th 2009
Takes soooo much f* time to fact-check what other people report. So much crap. So many partially reported information.
It's super difficult to (re)connect the dots.
FYI, this is the first time this picture is ever posted outside of the Chinese web. SPF kinda scoop, hey!
Gosh, that was taken 4 years ago, picture this!
:-X
A.


PS) Yep. Proud.
 

Attachments

  • 20091114-front.jpg
    20091114-front.jpg
    22.4 KB · Views: 288

Similar threads

Back
Top Bottom