Register here

Author Topic: SNCAC (Aérocentre) projects  (Read 17821 times)

Offline hesham

  • Senior Member
  • CLEARANCE: Top Secret
  • **
  • Posts: 22573
Re: SNCAC (Aérocentre) projects
« Reply #45 on: May 20, 2017, 09:02:29 am »
From an old "aviation magazine"

Nice find my dear Toura.

Offline hesham

  • Senior Member
  • CLEARANCE: Top Secret
  • **
  • Posts: 22573
Re: SNCAC (Aérocentre) projects
« Reply #46 on: July 16, 2018, 11:20:31 am »
Looking very antiquated, the concept of the 3-engined transport wasn't absolutely
dead after WW II, as can be seen by the Northrop -23/25.
Here it was SNCAC, using again this old formula for the NC.300.
Some data : 3 Wasp Junior engines, max.speed 265 km/h, range with 2000kg payload
1000 km, with 2500kg 500 km, take-off run approx.500m to clear a 20m obstacle.

By the way,

there was also NC.301,but no details are known.

Offline hesham

  • Senior Member
  • CLEARANCE: Top Secret
  • **
  • Posts: 22573
Re: SNCAC (Aérocentre) projects
« Reply #47 on: July 18, 2018, 04:50:28 am »
From Le Fana,

here is an early drawing to NC.211 & NC.281,also a Project for civil version of NC.211.

Offline hesham

  • Senior Member
  • CLEARANCE: Top Secret
  • **
  • Posts: 22573
Re: SNCAC (Aérocentre) projects
« Reply #48 on: July 30, 2018, 04:03:05 am »
From Le Fana 300,a small Info about NC.832.

Offline hesham

  • Senior Member
  • CLEARANCE: Top Secret
  • **
  • Posts: 22573
Re: SNCAC (Aérocentre) projects
« Reply #49 on: January 12, 2019, 07:08:14 am »
From Decollage 8/1946,

here is a SNCAC NC.830.

Offline avion ancien

  • CLEARANCE: Secret
  • **
  • Posts: 190
  • The accidental peasant!
Re: SNCAC (Aérocentre) projects
« Reply #50 on: January 12, 2019, 07:21:49 am »
Three examples of the SNCAC NC.830/840 Chardonneret were produced. These were:

NC.832 F-WDVY - 100hp Regnier 4EO seating three with tail wheel undercarriage
NC.840 F-WCDD - 140hp Renault 4 Pei seating four with tricycle undercarriage
NC.842 F-WCZD - 175hp Mathis radial seating four with tail wheel undercarriage

Offline hesham

  • Senior Member
  • CLEARANCE: Top Secret
  • **
  • Posts: 22573
Re: SNCAC (Aérocentre) projects
« Reply #51 on: January 12, 2019, 07:24:51 am »
Three examples of the SNCAC NC.830/840 Chardonneret were produced. These were:

NC.832 F-WDVY - 100hp Regnier 4EO seating three with tail wheel undercarriage
NC.840 F-WCDD - 140hp Renault 4 Pei seating four with tricycle undercarriage
NC.842 F-WCZD - 175hp Mathis radial seating four with tail wheel undercarriage

Thank you my dear Avion.

Offline hesham

  • Senior Member
  • CLEARANCE: Top Secret
  • **
  • Posts: 22573
Re: SNCAC (Aérocentre) projects
« Reply #52 on: January 15, 2019, 05:54:32 am »
From Decollage 11/1946.

Offline hesham

  • Senior Member
  • CLEARANCE: Top Secret
  • **
  • Posts: 22573
Re: SNCAC (Aérocentre) projects
« Reply #53 on: February 04, 2019, 07:02:55 am »
From JAWA 1947,

here is an Info about J.C.1 Levier light biplane.

Offline walter

  • CLEARANCE: Secret
  • **
  • Posts: 330
Re: SNCAC (Aérocentre) projects
« Reply #54 on: February 04, 2019, 10:51:17 am »
Hi Hesham :)
Here is a (slightly) better picture of the J.C.1 with the original F-WCDQ registration. This particular aircraft was indeed built by Aérocentre and J.C.1 stands for the designer Jean Chapeau. The aircraft (later F-PBCQ) had a long career and was modified several times and could now live in a museum (Le Bourget?).
A second example was the J.C.2 (F-PANO) and the third became known as C.B.10 (F-WDVL) this having been built by Mr. Chapeau and  Mr. Jean Blanchet , hence CB.
Regards

Offline walter

  • CLEARANCE: Secret
  • **
  • Posts: 330
Re: SNCAC (Aérocentre) projects
« Reply #55 on: February 04, 2019, 10:52:49 am »
Oops, forgot the picture

Offline hesham

  • Senior Member
  • CLEARANCE: Top Secret
  • **
  • Posts: 22573
Re: SNCAC (Aérocentre) projects
« Reply #56 on: February 04, 2019, 03:22:05 pm »
Many thanks to you my dear Walter.