Register here

Author Topic: Royal Canadian Navy: General Purpose Frigate (Cancelled 1963).  (Read 11352 times)

Offline thebig C

  • CLEARANCE: Confidential
  • *
  • Posts: 108
Hey Gang,
Came accross the General Purpose Frigate project of the Royal Canadian Navy and thought I would post it here. This project was developed in the 1961-1963 period. The intention was to build 8 such ships which were intended as the name implies to be multi purpose frigates, but, also to support Canadas UN commitments by embarking 200 troops, two helicopters (one ASW, one medium utility) and provide shore support.
The ships were to be approx 3300-3800 tons and were to be about 120m (400ft), in scale terms midway between the Annapolis Clas DE and the Iroquois Class Destroyer.
It struck me that in a sense these vessels would have been ahead of their time. Don't forget this is a different concept to a Fleet Auxilary, Landing Craft or Helicopter Cruiser....rather this is a ship whose primary role is as a frigate but with an ancillary role as a transport/support ship. Much like the (slightly larger) Absalon Class recently in service with the Danish Navy. In actual fact the parameters of 120-130m, 3.5-4k tons carrying 200 troops plus equipment almost exactly matches the currently proposed Irish EPV.....over 40 years later!!
Some links below:
 http://readyayeready.com/timeline/1960s/rcn-in-1963/part08.htm
http://centreforforeignpolicystudies.dal.ca/cdq/Davis%20June%201990.PDF
http://naval.review.cfps.dal.ca/archive/6105666-7724075/vol2num3art5.pdf
« Last Edit: April 26, 2012, 04:02:12 pm by thebig C »

Offline Grey Havoc

  • Senior Member
  • CLEARANCE: Top Secret
  • **
  • Posts: 7733
  • The path not taken.
Re: Royal Canadian Navy: General Purpose Frigate (Cancelled 1963).
« Reply #1 on: May 02, 2012, 10:07:00 am »
Nice find!
The sole imperative of a government, once instituted, is to survive.

Offline thebig C

  • CLEARANCE: Confidential
  • *
  • Posts: 108
Re: Royal Canadian Navy: General Purpose Frigate (Cancelled 1963).
« Reply #2 on: May 07, 2012, 09:38:34 am »
Thanks GH:) Yes, I came accross that proposal quite by accident some time ago. I was impressed by how far ahead of its time it was....thats probably why it was cancelled!

Offline JFC Fuller

  • Senior Member
  • CLEARANCE: Top Secret
  • **
  • Posts: 3148
Re: Royal Canadian Navy: General Purpose Frigate (Cancelled 1963).
« Reply #3 on: February 20, 2016, 04:08:26 pm »
The pictured ship is difficult to match with the description, it may well be the concept drawing of the General Purpose Frigate that was included in the Brock report in 1961, or some later incarnation of what seems to have been a frequently changing design. There are a couple of questionable features which might help date it;

1) In the above picture there is no obvious helicopter hangar but there is curious oblong shape immediately behind the Mk-13 launcher that could conceivably (though I am doubtful) be intended to represent a lift to take a helicopter into the hull.

2) The gun mounting forward looks like either a stylised Mk-33 twin 3" mounting or possibly a badly drawn twin 5"/38. The latter is not as ridiculous as it sounds, one source I have seen states that a 3"/38 was ultimately chosen instead of the 5"/54, a 3"/38 makes no sense but a 5"/38 would- equally another book states the design was to have had a twin 5" semi-automatic mounting and the only one that comes to mind is the 5"/38.

In terms of weapons and other systems; there is also a single Mk-13 launcher and what appear to be a pair of SPG-516 fire control radars to support Tartar. Particularly interesting is the Sea Mauler system mounted above the bridge. There would likely have been a limbo system under the square hatch aft of the Mk-13 launcher (and the strange oblong), further aft of that is what looks like an installation for an SQS-504 Variable Depth Sonar (this would apparently have been the SQS-505 that ended up on a number of Canadian ships). There also appears to be triple lightweight torpedo tubes mounted beside the aft superstructure. Some books state that the ships would have received the Small Ship Combat Data System which the RCN was then collaborating with the USN on at the time. 

It's worth noting that this design appears to be a fairly simple evolution and enlargement of the same basic family of destroyers the RCN had been building since the early 1950s starting with St Laurent class and ultimately ending with the Annapolis class. In this case they have essentially just replaced the aft twin 3" mounting with the Mk-13 launcher and added the appropriate radars. The design apparently grew significantly though ending up displacing over a 1,000 tons more than previous ships and requiring 50,000shp versus 30,000shp on earlier ships, and the final design may have had a helicopter hangar.

If anyone has additional insight I would love to know more.
« Last Edit: February 21, 2016, 06:38:05 am by JFC Fuller »

Offline JFC Fuller

  • Senior Member
  • CLEARANCE: Top Secret
  • **
  • Posts: 3148
Re: Royal Canadian Navy: General Purpose Frigate (Cancelled 1963).
« Reply #4 on: February 20, 2016, 11:27:28 pm »
After further reading it seems likely that image above is one of the later, if not final, design configurations as there is only a single Mauler system rather than two as there was earlier in the design process, one system having been deleted as a cost saving measure. The ship could land and refuel a Sea King in good weather but it was not to have been fitted with a beartrap (RAST) system, it would have had a light utility helicopter for long range torpedo delivery though, that may explain the oblong in the deck aft of the Mk-13 launcher, it could be a configuration similar to the Wasp landing pad and hangar on the RN Tribal class albeit flush with the deck in this case. In terms of guns, the snippet view on Google Books of Jane's Fighting Ships 1963 also suggests the 5"/38 twin mounting in the final design, if anyone has access to that book it probably has the full specifications.

The radar fit is described as being Dutch.

 
« Last Edit: February 20, 2016, 11:33:06 pm by JFC Fuller »

Offline Tzoli

  • CLEARANCE: Top Secret
  • ***
  • Posts: 560
Re: Royal Canadian Navy: General Purpose Frigate (Cancelled 1963).
« Reply #5 on: February 21, 2016, 01:22:04 am »
The turret's shape indeed that of the WW2 5"/38 Mark 12 gun's though the barrels are much longer, more close to the 5"/54 Mark 16's intended for the Montana and eventually delivered to the Midways. There were plans to put these guns on the Iowas after the first Gulf War in early-mid 1990's for their proposed but cancelled modernisation. The original turrets in this case would had been lengthened a bit to accept the new guns.

Offline zen

  • Senior Member
  • CLEARANCE: Top Secret
  • **
  • Posts: 815
Re: Royal Canadian Navy: General Purpose Frigate (Cancelled 1963).
« Reply #6 on: February 21, 2016, 02:52:37 pm »
Quote
The radar fit is described as being Dutch.

Could that be an early Broomstick set design as the big sphere?

Offline JohnR

  • CLEARANCE: Secret
  • **
  • Posts: 353
Re: Royal Canadian Navy: General Purpose Frigate (Cancelled 1963).
« Reply #7 on: February 21, 2016, 03:53:00 pm »
I thought the proposal was to refit the Iowa's with 5"/54 Mk45?

Isn't 61-63 to early for Broomstick?

Regards.

Offline JFC Fuller

  • Senior Member
  • CLEARANCE: Top Secret
  • **
  • Posts: 3148
Re: Royal Canadian Navy: General Purpose Frigate (Cancelled 1963).
« Reply #8 on: February 21, 2016, 11:40:27 pm »
Could that be an early Broomstick set design as the big sphere?

It briefly crossed my mind but I think its highly unlikely. These ships were to be ordered starting in 1964 which is too early for Broomstick, that mast looks too feeble to handle something like Broomstick and the general Canadian approach to these ships was to keep them small, relatively cheap and low risk- attributes that could hardly be derived from using Broomstick. Furthermore I have never seen Canada mentioned in the context of that radar.

If I had to guess I would say its probably the AN/SPS-501 (the transmitter from the AN/SPS-12 mated to the Dutch LW03 antenna) as installed on HMCS Bonaventure in 1967 and subsequently the Iroquois class destroyers, just in this case with weather protection. The basic arrangement of the radars and masts certainly looks very like that ultimately installed on the Iroquois class, far more so than it does to any representation of a Broomstick configuration I have seen.

Tzoli,

It was the length of the gun barrels that originally had me confused (and made me think of the Mark 33 3" mounting) but I think but I am now satisfied that it is almost certainly a twin 5"/38 mounting, likely the Mk-38.
« Last Edit: February 22, 2016, 03:32:53 am by JFC Fuller »

Offline Tzoli

  • CLEARANCE: Top Secret
  • ***
  • Posts: 560
Re: Royal Canadian Navy: General Purpose Frigate (Cancelled 1963).
« Reply #9 on: February 22, 2016, 01:34:00 am »
I thought the proposal was to refit the Iowa's with 5"/54 Mk45?

I'm not sure, the conversation was lost regarding this matter as the old Warship Projects forum is no more.


Tzoli,

It was the length of the gun barrels that originally had me confused (and made me think of the Mark 33 3" mounting) but I think but I am now satisfied that it is almost certainly a twin 5"/38 mounting, likely the Mk-38.

I still think the barrels are too long for the turret to be the 38 calibre ones. The turret also looks like enlarged, especially of the aft.

54 calibre, Mark 16
http://navweaps.com/Weapons/WNUS_5-54_mk16_pics.htm

38 calibre Mark 12
http://navweaps.com/Weapons/WNUS_5-38_mk12_pics.htm

Offline JFC Fuller

  • Senior Member
  • CLEARANCE: Top Secret
  • **
  • Posts: 3148
Re: Royal Canadian Navy: General Purpose Frigate (Cancelled 1963).
« Reply #10 on: February 22, 2016, 02:47:06 am »
I still think the barrels are too long for the turret to be the 38 calibre ones. The turret also looks like enlarged, especially of the aft.

Its a drawing, not a photo. In 1962-4 there were no twin 5"/54 mountings in production nor had any been built so either the Canadians were looking at some sort of strange and unique new mounting or this is just a badly drawn 5"/38. I would imagine the original desire was for the US 5"/54 Mark 42.

Offline Abraham Gubler

  • Senior Member
  • CLEARANCE: Top Secret
  • **
  • Posts: 3559
Re: Royal Canadian Navy: General Purpose Frigate (Cancelled 1963).
« Reply #11 on: February 24, 2016, 05:53:46 pm »
It briefly crossed my mind but I think its highly unlikely. These ships were to be ordered starting in 1964 which is too early for Broomstick, that mast looks too feeble to handle something like Broomstick and the general Canadian approach to these ships was to keep them small, relatively cheap and low risk- attributes that could hardly be derived from using Broomstick. Furthermore I have never seen Canada mentioned in the context of that radar.

The original CF.299 carrying, Leander designs had a very similar spherical antenna in their sketch designs.
"There is a tendency in our planning to confuse the unfamiliar with the improbable." Thomas Schelling

Offline Arjen

  • CLEARANCE: Top Secret
  • ***
  • Posts: 2103
  • It's turtles all the way down
Re: Royal Canadian Navy: General Purpose Frigate (Cancelled 1963).
« Reply #12 on: February 25, 2016, 12:52:50 am »
These ships were to be ordered starting in 1964 which is too early for Broomstick
Two prototype sets of Broomstick were built by HSA in the sixties - one intended for the Dutch Navy, the other for the Royal Navy. When the UK-NL cooperation in developing Broomstick was cancelled, the British set was was bought by the Dutch Navy. Both sets then found their way to the GW-frigates Tromp and De Ruyter which reached full operational status in the mid seventies.
Source: 'Deugdelijke Schepen - Marinescheepsbouw 1945-1995 ' by SG Nooteboom.

Considering that only prototype Broomstick-sets were available in the sixties, installation on the proposed Canadian frigates seems unlikely.

Offline JFC Fuller

  • Senior Member
  • CLEARANCE: Top Secret
  • **
  • Posts: 3148
Re: Royal Canadian Navy: General Purpose Frigate (Cancelled 1963).
« Reply #13 on: February 25, 2016, 02:38:20 am »
My very first thought when looking at that dome was that it reminded me of the sphere on the early 1962 diagrams used in the magazine layout study (not actual ship preliminaries) for what became the Type 82 class that is labelled simply as 'surveillance radar'. However, the Canadians were planning on laying the keel on the first General Purpose Frigate in December 1964 when the program was cancelled (late 1963) and its inconceivable that a Type 988 could be available for that sort of timeline.

Offline Hood

  • Senior Member
  • CLEARANCE: Top Secret
  • **
  • Posts: 977
Re: Royal Canadian Navy: General Purpose Frigate (Cancelled 1963).
« Reply #14 on: February 26, 2016, 01:08:07 am »
My very first thought when looking at that dome was that it reminded me of the sphere on the early 1962 diagrams used in the magazine layout study (not actual ship preliminaries) for what became the Type 82 class that is labelled simply as 'surveillance radar'.

There is also smaller randome on the initial CVA-01 sketch design of 1963 simply labelled as 'surveillance radar'. However, I'm tempted not to read too much into it other than placeholders drawn in until the final size and configuration was known. I'd still back your earlier hunch that its the  AN/SPS-501 with a randome on the Canadian Frigate.