Boeing Lightweight fighter design to LWF requirement

overscan (PaulMM)

Administrator
Staff member
Joined
27 December 2005
Messages
16,317
Reaction score
18,572
Boeing's LWF design was rated very highly in the LWF competition. It has been suggested it came second in the evaluation to General Dynamics Model 401 (F-16), but Northrop's P-610 was given the second contract because it was twin engined and hence represented a different approach. Boeing's design was too similar to General Dynamics'.

First time I've seen a 3 view presented, albeit very ropey quality.

Sources:

Mockup photos via Gary Morelock
Model photo: Boeing via Jay Miller
William H Ball, "Rapid Calculation of Propulsion System Installation Corrections" AIAA 74-1174
 

Attachments

  • boeing-908-909.jpg
    boeing-908-909.jpg
    34.5 KB · Views: 2,314
  • boeing-908-909a.jpg
    boeing-908-909a.jpg
    90.5 KB · Views: 3,004
  • boeing-908-909b.jpg
    boeing-908-909b.jpg
    87.6 KB · Views: 2,780
  • boeing-908-909c.jpg
    boeing-908-909c.jpg
    43.9 KB · Views: 2,433
The last pic is obviously a different design/derivative, because of the blending. I think it looks better than the non-blended version, IMHO. Do we know which of the designs shown was the actual submission? I would guess the non-blended design, since it's a full scale mock-up, but I was just curious about that.
 
Anybody have some technical data for this project, please.

Servus Maveric
 
Is that a full size mock-up? Although I guess it shares the semi-reclined seating arrangement of the F-16 the cockpit seems too shallow to fit the pilots legs, rudder pedals and any other avionics in the nose. It would be a very tight squeeze taking references from the man standing beside it.
 
Thanks to Tony Buttler's American Secret Projects we can confirm that the model illustrates Boeing Model 908-618, an earlier study, while the mockup and 3 view is the later 908-909 design. Unfortunately no dimensions are given.
 
Much better copy of the Boeing LWF 3 view plus 2 detail drawings. It should be possible to calculate size from the dimensions given in the detail drawings.

http://www.dtic.mil/cgi-bin/GetTRDoc?AD=AD907816&Location=U2&doc=GetTRDoc.pdf
 

Attachments

  • Boeing-LWF-intake.jpg
    Boeing-LWF-intake.jpg
    37.9 KB · Views: 603
  • Boeing-LWF-tail.jpg
    Boeing-LWF-tail.jpg
    61.6 KB · Views: 646
  • Boeing-LWF.jpg
    Boeing-LWF.jpg
    83.3 KB · Views: 2,274
Note the 2D intake, which compared to a simple pitot intake was supposed to optimise performance for Mach 1.6 and allow Mach 2.0 as a fallout.
 
My attempt to scale this drawing from the detail drawing yielded a length of about 44ft 6in, which seems a bit low.
 
The earlier design with the LERX is the Boeing 908-618. Model 908-618-2 was featured in Riccioni, Boyd and Sprey's "Falcon Brief" presentation.

Apparently, Boeing were unable to converge a workable design for the LERX so removed it from their 908-909 submission.

Boeing 908-618-2 was 47.8ft in length from tip of pitot tube to end of tail. Excluding the pitot and tail, length was 43ft. Wing span was 29.3ft, tail span 17ft, height 14ft. Wing area was 240 sq ft. Takeoff weight clean was estimated at 16,000lb, empty weight 11,700lb, with provision for 4,300lb internal fuel. Engine was the F100-PW-100.

Source:
James P Stevenson The Pentagon Paradox
 

Attachments

  • 908-618-2.jpg
    908-618-2.jpg
    91.2 KB · Views: 3,472
seems an interpretation of F-16 made by Boeing : an artistic flying technology !!! ;D
 
The lower of three images (with the blended wing) seems to amount to a significant redesign (as a derivative) as the wing appears to have a higher incidence in it's mounting location to "blend" with the nose strakes.
 
Yes, as stated above, there are two different design in this topic, 908-618 with LERX and mid wing and 908-909 without LERX and low wing.
 
Pioneer said:
Its been a while - but do you have a pic or link of this Mock-up V-1100 Archibald????
The suspense has been killing me!!!!!!!!!!

Regards
Rioneer

No, the mockup pics are of the Boeing LWF.
 
791px-L-73-645.jpg


755px-1973-02-05_Boeing_Close_Air_Support_Model_in_16%27_Tunnel.jpg


All 17 pictures in high-res here:
http://crgis.ndc.nasa.gov/historic/Test_281:_Boeing_Close_Air_Support_Aircraft
 
This appears to be a straightforward modification of the Boeing LWF design - probably reusing an LWF wind tunnel model. The vertical canards imply some kind of AFTI style direct side force control.
 

Attachments

  • L-73-645.jpg
    L-73-645.jpg
    369.6 KB · Views: 365
  • L-73-644.jpg
    L-73-644.jpg
    323.9 KB · Views: 281
  • L-73-643.jpg
    L-73-643.jpg
    308.7 KB · Views: 1,242
  • L-73-854.jpg
    L-73-854.jpg
    335.1 KB · Views: 1,565
  • L-73-752.jpg
    L-73-752.jpg
    358.3 KB · Views: 1,807
Nice colour view of Boeing LWF model before the canards were added.
 

Attachments

  • 1973_Boeing_Light_Weight_Fighter.jpg
    1973_Boeing_Light_Weight_Fighter.jpg
    595.7 KB · Views: 214
Recently found these higher-res copies on an old hard disk.
 

Attachments

  • 908-909Mockup1.JPG
    908-909Mockup1.JPG
    124.7 KB · Views: 438
  • 908-909Mockup2.JPG
    908-909Mockup2.JPG
    89.6 KB · Views: 499
Interestingly Bob Sandusky (Northrop F-20, YF-23) started at Boeing and did aerodynamic configuration on the Boeing LWF.
 
In my files,

Boeing designed a close air-support airplane based on this design with some improvements
in configuration,but I don't remember the source,need confirm.
 
hesham said:
In my files,

Boeing designed a close air-support airplane based on this design with some improvements
in configuration,but I don't remember the source,need confirm.

All I remember it was in early 1973 ?.
 
hesham said:
In my files,

Boeing designed a close air-support airplane based on this design with some improvements
in configuration,but I don't remember the source,need confirm.

All I remember that; the forward ventral control fins under the inlet that would allow side
translations during the bomb runs ?.
 
NASA added two more colour photos of the Boeing LWF. I've edited them to bring out the features of the models as much as possible.

 

Attachments

  • L-73-327_Boeing_Close_Air_Support_Aircraft_Test_281.jpg
    L-73-327_Boeing_Close_Air_Support_Aircraft_Test_281.jpg
    3 MB · Views: 228
  • L-73-329_Boeing_Close_Air_Support_Aircraft_Test_281_1973.jpg
    L-73-329_Boeing_Close_Air_Support_Aircraft_Test_281_1973.jpg
    1.1 MB · Views: 232
There is a drawing with an artist's impression attached. The cockpit area seems to be too shallow to house the ejection seat and pilot and needs to made taller, possibly with an F-16 type canopy.

boeing14.jpg
 
As some have pointed out, the canopy is too low: take the pilot figure in the last drawing and try to place him in the cockpit (admittedly he would be in seated position), does not seem to fit. Also from the drawing, the cockpit height from floor to top of canopy is (on my screen) 1.2 cm to compared to 4.8 cm for the height of the aircraft, which is 25% of the height. One fourth of the height (14 feet) is 3.5 feet which is 1.1 metres, is this tall enough to include the pilot and ejection seat?
 
Back
Top Bottom