Modern Gyroplane concepts (Carter Aviation, Groen Brothers)

yasotay

ACCESS: Top Secret
Top Contributor
Senior Member
Joined
18 October 2006
Messages
3,839
Reaction score
3,621
Thanks for getting back on track. :)

I could not find the other thread where the picture below was first posted. Was this a Fairey concept or was it from another organization?
 

Attachments

  • First%20Image.jpg
    First%20Image.jpg
    15.5 KB · Views: 475
  • crnt_tech_clip_image002.gif
    crnt_tech_clip_image002.gif
    22.2 KB · Views: 1
Ah, I thought as much. Thanks Jemiba.
 
Here's a concept from Carter Aviation:

http://www.cartercopters.com/images/CCHT_GearDown_milan_soukup.jpg
http://www.popularmechanics.com/content/imageview.cfm?img=http://media.popularmechanics.com/images/tb_carter1-lg.jpg&caption=
http://www.popularmechanics.com/content/imageview.cfm?img=http://media.popularmechanics.com/images/tb_carter2-lrg.jpg&caption=

Also for the fire department ;D :
http://www.cartercopters.com/heliplane_hydra-blaster.html

The company received some limited funding from NASA. There's also a concept from Groen Bros. Aviation that recieved funding from DARPA to transform c-130 into a gyroplane:
http://www.combatreform2.com/c130gyroplanetn.jpg

I'm wondering what sets these concepts apart from the Sikorsky X2 family:
http://www.secretprojects.co.uk/forum/index.php/topic,2768.0.html

I was afraid that if I post this on the Sikorsky X2 thread, people will crucify me for being off-topic (promoting other techs rather than the x2) about an already somewhat off-topic discussion, but if the mod think that it would fit in there, then please merge them together or something. Thanks!

EDit: Do I have to save the images down in order to attach them here? 'Cause now I can only link to the pages but i can't get the pix to show up on my post.
 

Attachments

  • CCHT_GearDown_milan_soukup.jpg
    CCHT_GearDown_milan_soukup.jpg
    372.3 KB · Views: 208
  • tb_carter1-lg (1).jpg
    tb_carter1-lg (1).jpg
    66.6 KB · Views: 198
  • tb_carter2-lrg (1).jpg
    tb_carter2-lrg (1).jpg
    65.8 KB · Views: 206
  • c130gyroplanetn (1).jpg
    c130gyroplanetn (1).jpg
    12.1 KB · Views: 194
You don't have to, but it is best practise to save and upload in case the original image becomes unavailable.
 
donnage99 said:
Here's a concept from Carter Aviation:

http://www.cartercopters.com/images/CCHT_GearDown_milan_soukup.jpg
http://www.popularmechanics.com/content/imageview.cfm?img=http://media.popularmechanics.com/images/tb_carter1-lg.jpg&caption=
http://www.popularmechanics.com/content/imageview.cfm?img=http://media.popularmechanics.com/images/tb_carter2-lrg.jpg&caption=


Those are along the lines of the Stavatii "F-26" :D (That mast on the picture is hilarious.)


donnage99 said:
The company received some limited funding from NASA. There's also a concept from Groen Bros. Aviation that recieved funding from DARPA to transform c-130 into a gyroplane:
http://www.combatreform2.com/c130gyroplanetn.jpg



Dead.

donnage99 said:
EDit: Do I have to save the images down in order to attach them here? 'Cause now I can only link to the pages but i can't get the pix to show up on my post.

Hot-linking isn't a good idea because it sucks up others' bandwidth and if they get annoyed they might put up a surprise picture for you ;)
 
Groen Brothers Aviation (GBA) GyroLifter based on Lockheed C-130 Hercules. The GBA Gyrodyne FireFighter is named Monsoon (TM).

http://www.groenbros.com/gyrodyne_tech.php
http://www.gbainvestor.com/
 

Attachments

  • tb_c130-lg.jpg
    tb_c130-lg.jpg
    161.3 KB · Views: 169
  • firefighter.jpg
    firefighter.jpg
    332.6 KB · Views: 116
I believe that there is still some work going on with DARPA or another organization, I doubt it will result in a flying prototype or much more than some papers.
 
I imagine the dust those would kick up on an Afghan airfield would be hellish. Were any of these considered for that Joint Heavy Air Lift(?) program?
 
yasotay said:
I believe that there is still some work going on with DARPA or another organization, I doubt it will result in a flying prototype or much more than some papers.

AFAIK they're still working with Georgia Tech in hopes of moving it to the next phase. What the next phase is exactly I do not know.
 
Lampshade111 said:
I imagine the dust those would kick up on an Afghan airfield would be hellish. Were any of these considered for that Joint Heavy Air Lift(?) program?


No worse than you'd get from an Osprey or an "Angry Chook" in all likelihood.
 
Rotor downwash is proportional to disc loading. The higher discloading will generate higher downwash velocities. Just take takeoff gross weight and divide by disc area and you get an idea of which one is worse.
 
Carter CGT-150 & CHT-150 Transport Overview

Via Internet Archive

The CGT-150, Carter's Gyroplane Transport with a 150' diameter rotor and wingspan, will be able to perform jump take offs and zero roll landings without a runway. It will not be able to hover like a helicopter, but the associated weight savings will give it an increased payload. At high speeds, it will unload its rotor onto very efficient high-aspect ratio wings and (in the process) slow the rotor to minimize profile drag and maximize flight efficiency. A hovering variant, the CHT-150, or Carter Heliplane Transport, would be able to operate like a helicopter. At high speeds, it will transfer to a gyroplane mode and operate just like the CGT-150. However, the gearbox required to power the rotor will increase the empty weight, and reduce the payload by about 20,000 lbs.

Both aircraft will be powered by two Pratt & Whitney F135 engines, the same as used in the Joint Strike Fighter. The gyroplane version will have an empty weight of around 140,000 lbs, while the heliplane version will have an empty weight of around 160,000 lbs, and both will have a max gross weight of 330,000 lbs. A fully loaded 18-wheeler could be driven up its ramp and parked inside (with room to spare), and then flown away - straight up. A military version could carry two fully loaded Stryker Vehicles, 1 Abrams tank, or 200 combat troops. Once airborne, with the rotor slowed and the lift transferred to the wings, flight efficiencies will approach those of fixed-wing aircraft. The CGT-150 is designed to cruise at 500 MPH at 30,000 ft altitude and carry a 140,000 lb payload for over 1000 miles.

The only new technologies needed to design the CHT-150 were proven in flight tests on the CarterCopter Technology Demonstrator (CCTD). The CCTD was built as a proof-of-concept demonstrator for both the Carter ultra-high-inertia rotor and the control system interface between the rotor and wings. Other innovations on the prototype include the Carter high efficiency prop with a computerized prop controller, and the extreme-energy absorbing landing gear. On the CHT-150, the 24-ft diameter 4-bladed version of the same prop will produce over 70,000 lbs of static thrust per prop (x 2 props). The CHT-150 version of the same landing gear with a 7 ft stroke will be able to absorb landing impacts up to 50 feet per second without damage to the aircraft or occupants.

Source: http://web.archive.org/web/20080531050739/www.cartercopters.com/heliplane_overview.html
 

Attachments

  • heli_iso1_3d.jpg
    heli_iso1_3d.jpg
    69.1 KB · Views: 82
  • heli_front_3d.jpg
    heli_front_3d.jpg
    15.1 KB · Views: 74
  • heli_side_3d.jpg
    heli_side_3d.jpg
    26.9 KB · Views: 76
  • heli_top_3d.jpg
    heli_top_3d.jpg
    33.8 KB · Views: 67

Attachments

  • hydra_blaster_drop2.jpg
    hydra_blaster_drop2.jpg
    33.2 KB · Views: 63
  • hydra_blaster_high_rise.jpg
    hydra_blaster_high_rise.jpg
    34.7 KB · Views: 55
  • hydra_blaster_highway.jpg
    hydra_blaster_highway.jpg
    24.4 KB · Views: 52
  • hydra_blaster_church.jpg
    hydra_blaster_church.jpg
    22.9 KB · Views: 49
  • hydra_blaster_drop1.jpg
    hydra_blaster_drop1.jpg
    34.1 KB · Views: 58

Similar threads

Back
Top Bottom