Projects from Robert Ludvigovich Bartini (Roberto Oros di Bartini)

borovik said:

Stal - 6 ; Stal-8 inboard profiles

Click to expand...

And from Kryl'ya Rodine 2/1995,


the Stal-6 and Stal-8.

OK my dear Jemiba.

Hi! As the Steel Was Tempered". Speed ​​fighter Bartini Steel and Steel-6-8. the USSR
http://translate.google.fr/translate?hl=fr&sl=ru&tl=en&u=http%3A%2F%2Falternathistory.com%2Fkak-zakalyalas-stal-skorostnye-istrebiteli-bartini-stal-6-i-stal-8-sssr&sandbox=1

"In addition to the above, this was due to the application of evaporation-condensation motor cooling system with a steam condenser wing. Condenser is a double lining, wing from the bottom shelf of the front side member, then through the sock over the entire upper side of the aileron linkage to the nodes. wing design mainly welded seam on the spot and electric welding using a soldering termination double cladding for sealing. When the engine boiling water to the space between the wing skin and condense on the large internal surface 12,37 m², pump fed back into the engine. Especially effective evaporative system worked in flight at high speed, with strong convective heat transfer. Long gazovki engine at stops were undesirable. "

Also pleae take care about bicycle style landing gear and STAL-8 wind shield slide forward direction.

Another information.
http://ourairports.biz/?p=6423
http://vvs.hobbyvista.com/Research/Bartini/Stal6/
http://blog.livedoor.jp/janome_gotyou/archives/50069232.html
http://www.ussr-airspace.com/index.php?main_page=product_info&cPath=28_39_38_105&products_id=869
http://www.airwar.ru/enc/xplane/stal6.html
Steel-6.
http://translate.google.fr/translate?hl=fr&sl=ru&tl=en&u=http%3A%2F%2Fwww.airwar.ru%2Fenc%2Fxplane%2Fstal6.html&sandbox=1

Hi,

Mr. Bartini submitted an idea for tandem two engines mounted in the wing during 1931,but the question
is; was that concept translated into a real airplane design ?.

http://samara.rgantd.ru/activity/articles/10907/

hesham said:

Hi,

Mr. Bartini submitted an idea for tandem two engines mounted in the wing during 1931,but the question
is; was that concept translated into a real airplane design ?.

Click to expand...

Patent only.

Thank you my dear Granit.