PMN1

ACCESS: Top Secret
Senior Member
Joined
4 June 2006
Messages
1,191
Reaction score
1,097
A very interesting site concerning the decisons that led to the STS being the way it is.

http://history.nasa.gov/SP-4221/contents.htm
 
To complete this website, here's another which narrate full story of early shuttle years (1969-1973). http://www.abo.fi/~mlindroo/SpaceLVs/Slides/index.htm

;)
 
Archibald said:
To complete this website, here's another which narrate full story of early shuttle years (1969-1973). http://www.abo.fi/~mlindroo/SpaceLVs/Slides/index.htm

;)

Interesting, I hadn't realised there was a NASA equivalent of Truax's Sea Dragon (even though i've seen that site a few times) admitedley with multiple engines as opposed to the single big engine of Sea Dragon.

NASA

http://www.abo.fi/~mlindroo/SpaceLVs/Slides/sld042.htm

Truax

http://www.astronautix.com/lvs/searagon.htm
 
From AIAA paper 78-1469
Space Shuttle Orbiter Configuration Case History
H. A. Scott (one of Shuttle Orbiter backbone men)
Rockwell International
Los Angeles, California

AlAA AIRCRAFT SYSTEMS AND TECHNOLOGY CONFERENCE
Los Angeles, Calif./August 21-23,1978

Favourite Orionblamblam's C-0157 shuttle also presents)))
 

Attachments

  • Phase-A-(LLRV).jpg
    Phase-A-(LLRV).jpg
    152.4 KB · Views: 2,928
  • Pre-Phase-B.jpg
    Pre-Phase-B.jpg
    132.2 KB · Views: 2,690
  • Phase-B.jpg
    Phase-B.jpg
    186.6 KB · Views: 2,351
  • Phase-B-Prime.jpg
    Phase-B-Prime.jpg
    106.1 KB · Views: 2,190
  • Phase-B-Double-Prime.jpg
    Phase-B-Double-Prime.jpg
    223.2 KB · Views: 2,074
  • Pre-Phase-C.jpg
    Pre-Phase-C.jpg
    123.9 KB · Views: 999
  • Phase-C.jpg
    Phase-C.jpg
    132.5 KB · Views: 1,145
Hi,

here is the early methods to launch the NASA Orbiter shuttle at the first
page and a drawing to it with two site jet engines.

http://www.flightglobal.com/PDFArchive/View/1972/1972%20-%201458.html
http://www.flightglobal.com/PDFArchive/View/1972/1972%20-%201460.html
 

Attachments

  • Drawing.JPG
    Drawing.JPG
    20.7 KB · Views: 750
  • Orbiter.JPG
    Orbiter.JPG
    37 KB · Views: 674
very late, beyond Phase B study

the Shuttle had planned 2 jet engines for landing (and Shuttle transport)
and a crew escape system (cockpit separates by pirotech, solid rocket, Parasute)

but money cuts and weight problem
went Jet engine first out and crew escape system as last...
 
Hi,

single stage and two stage concepts.

http://www.flightglobal.com/PDFArchive/View/1972/1972%20-%202919.html
 

Attachments

  • Shuttle 1.JPG
    Shuttle 1.JPG
    41.5 KB · Views: 689
  • Shuttle 2.JPG
    Shuttle 2.JPG
    47.3 KB · Views: 701
Hi,

the Space Shuttle with new liquid fly-back boosters.

http://www.flightglobal.com/PDFArchive/View/1999/1999%20-%202135.html
 

Attachments

  • untitled.JPG
    untitled.JPG
    32.5 KB · Views: 676
A model of the C-1057 study is available:

http://www.fantastic-plastic.com/RockwellC-1057BreadboxShuttlePage.htm
 
Hi,

the Boeing and Lockheed shuttle concepts from many designs
to those companies.

http://www.flightglobal.com/PDFArchive/View/1970/1970%20-%200285.html
 

Attachments

  • Boeing and Lockheed shuttle projects.JPG
    Boeing and Lockheed shuttle projects.JPG
    32.2 KB · Views: 610
Hi,

the space shuttle derivative to can carry 90,100 and 230 to 270 tonnes.

http://www.flightglobal.com/pdfarchive/view/1979/1979%20-%200871.html
http://www.flightglobal.com/pdfarchive/view/1979/1979%20-%200872.html
 

Attachments

  • 100 tonnes.JPG
    100 tonnes.JPG
    46.1 KB · Views: 517
  • 90 and 230-270 tonnes.JPG
    90 and 230-270 tonnes.JPG
    74.3 KB · Views: 557
What kind of engines are specified for the liquid-fueled boosters on the shuttle-derived vehicle?

Mark Wade's site has a drawing of the shuttle with similar LRB's (four engines per booster and shutters to protect the engines during splashdown.) But his drawing is from a later study that utilizes STME's.

Also looks like the SSME's are in a recoverable pod, brought back to earth with a pair of retro rockets (presumably solid rockets, but Shuttle OMS engines aren't out of the question.)
 
Hi,

the shuttle contenders from McDonnell Douglas/Martin Marietta,North American
Rockwell/General Dynamics and Grumman/Boeing.
Also the Convair shuttle of early 1960s.

http://www.flightglobal.com/pdfarchive/view/1972/1972%20-%200229.html?search=spacecraft%201972
http://www.astronautix.com/craft/concraft.htm
 

Attachments

  • Convair shuttle.jpg
    Convair shuttle.jpg
    10.8 KB · Views: 569
  • shuttle contenders.JPG
    shuttle contenders.JPG
    105.3 KB · Views: 514
I remember reading in an Old AWST (1970?) about a Rockwell proposal for the Phase B (TSTO) Shuttle which involved BAC work on the booster stage.

Does anyone have more info on this, or was it one of those 'briefly floated' ideas that sink beneath history's waves - never to be seen again?

Starviking
 

Attachments

  • NAR Final Shuttle.jpg
    NAR Final Shuttle.jpg
    269.2 KB · Views: 854
  • McDD Final Shuttle.jpg
    McDD Final Shuttle.jpg
    234.6 KB · Views: 829
Hi,

North American/Rocklwell space shuttle of 1972.
http://www.flightglobal.com/pdfarchive/view/1972/1972%20-%200167.html
 

Attachments

  • Rockwell shuttle.JPG
    Rockwell shuttle.JPG
    99.2 KB · Views: 750
Hi,

a flight impression of NASA space shuttle.
http://www.flightglobal.com/pdfarchive/view/1968/1968%20-%201653.htm
 

Attachments

  • shuttle.JPG
    shuttle.JPG
    53 KB · Views: 707
Hi,

the Grumman two-vehicles (booster and orbiter) concept,I think it
is a big surprise to me and you.
http://www.flightglobal.com/pdfarchive/view/1970/1970%20-%200454.html
 

Attachments

  • Grumman.JPG
    Grumman.JPG
    38.1 KB · Views: 725
hesham said:
Hi,

a flight impression of NASA space shuttle.
http://www.flightglobal.com/pdfarchive/view/1968/1968%20-%201653.htm

This image depict, obviously, some FDL concept (as a sort of "deformed FDL-5") clearly recognizable are the vertical launch assembly, the two jettisonable tanks (as X 15ish style) and the folded wings extracted just prior landing.

Anyway this is the first image, I've ever seen, that is depicting an FDL mission.
Many thanks Hesham for this interesting contribution about the matter... :D
 
Hi,

I think anther drawing to Grumman two-vehicles (booster and orbiter) concept.
http://anon.nasa-global.speedera.net/anon.nasa-global/CAIB/CAIB_lowres_chapter1.pdf
 

Attachments

  • Grumman shuttle.JPG
    Grumman shuttle.JPG
    29.6 KB · Views: 465
This one is *slightly* better
 

Attachments

  • Faget_DC-3_med.jpg
    Faget_DC-3_med.jpg
    154.4 KB · Views: 546
Hi,

I think it was a space shuttle.
http://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19790005909_1979005909.pdf
 

Attachments

  • untitled.JPG
    untitled.JPG
    35.8 KB · Views: 469
Hesh,

Good guess, buddy. But it's already been covered in over Postwar. Check it out:

http://www.secretprojects.co.uk/forum/index.php/topic,5446.0/highlight,hsra.html
 
An to all those interested to heard from the very people that designed,build and operated the Space Shuttle, here is the link to the complete lectures as part of the MIT OpencourseWare.

http://ocw.mit.edu/OcwWeb/Aeronautics-and-Astronautics/16-885JFall-2005/CourseHome/index.htm?r=iTunes

These are 20+ lectures, each 1:30+ long. It was quite remarkable to hear them.
 
Hi,

the MD shuttle.
http://ntrs.nasa.gov/archive/nasa/casi.ntrs.nasa.gov/19710015994_1971015994.pdf
 

Attachments

  • MD 1.JPG
    MD 1.JPG
    27.5 KB · Views: 481
  • MD 2.JPG
    MD 2.JPG
    20.2 KB · Views: 436
  • MD 3.JPG
    MD 3.JPG
    18.6 KB · Views: 425
Hello!

I knew that Shuttle used a solid-fuel upper stage, the IUS. At the other end of the performance spectrum, used of the Centaur was stopped only by the Challenger disaster
(frightening story here http://space.co.uk/Features/Newsletters/200811November/FlightsoftheDeathStarPage1/tabid/628/Default.aspx)

But the Agena is new to me
http://ntrs.nasa.gov/search.jsp?N=0&Ntk=all&Ntx=mode%20matchall&Ntt=shuttle%2Fagena

After storable propellants would nicely fit the performance gap between solid and cryogenic fuel...

Agena in a shuttle bay = as dangerous as a Centaur ?
(non cryogenic, but highly toxic corrosive... on the other hand Shuttle OMS use storable propellants)
 
Agena in a shuttle bay = as dangerous as a Centaur ?
(non cryogenic, but highly toxic corrosive... on the other hand Shuttle OMS use storable propellants)

the OMS used fuel is monomethylhydrazine (MMH), which is oxidized with nitrogen tetroxide (N2O4).
http://en.wikipedia.org/wiki/Monomethylhydrazine
http://en.wikipedia.org/wiki/Dinitrogen_tetroxide
safe storable propellants

the Agena used fuel is UDMH , which is oxidized with Inhibited white fuming nitric acid
http://en.wikipedia.org/wiki/UDMH
http://en.wikipedia.org/wiki/White_fuming_nitric_acid
the oxidizer tank need protective metallic fluoride coating !
Being a powerful oxidizing agent, nitric acid reacts violently with many organic materials and the reactions may be explosive
something you don't want in a Shuttle cargobay in case the oxidizer tank, feedline or valve leaks

Wat i wonder is, had Martin never proposed Transtage for Shuttle upperstage ?
(they had proposed Transtage as ad-on booster under the ET in 1982)
 
Michel Van said:
Wat i wonder is, had Martin never proposed Transtage for Shuttle upperstage ?
(they had proposed Transtage as ad-on booster under the ET in 1982)

I think they did. There's a congressional hearing report from around 1972 or so that includes presentations from about four different companies proposing "space tugs" for the shuttle. There were several Agena proposals, a Grumman proposal, and I think a Martin proposal using the Transtage. I'll look around for it in my files. From vague memory, I think that the Transtage had some early performance problems, but these were later solved. However, I believe I also heard from some people familiar with it that it was not very popular. The Air Force people who had to work with it did not like it.

I remember that there were at least three Agena proposals--a "large tank" Agena (their preferred design), an Agena with drop tanks, and three separate Agenas with separate payloads.
 
1990s Rockwell thoughts of Space Shuttle evolution
 

Attachments

  • 1990_adv-shuttle_01.jpg
    1990_adv-shuttle_01.jpg
    201.2 KB · Views: 820
  • 1990_adv-shuttle_02.jpg
    1990_adv-shuttle_02.jpg
    172.6 KB · Views: 760
  • 1990_adv-shuttle_03.jpg
    1990_adv-shuttle_03.jpg
    90.8 KB · Views: 777
Hi,

http://abyss.uoregon.edu/~js/space/lectures/lec23.html
 

Attachments

  • sts_history1.jpg
    sts_history1.jpg
    11.1 KB · Views: 799
flateric said:
1990s Rockwell thoughts of Space Shuttle evolution

That first picture with a reference length of 1486 inches - so were they thinking of adding 20 inches to the orbiter? I've a reference to Endeavor being 1466 inches long - but perhaps the measurements aren't directly comparable...
 
1466 inches is the length of a standard orbiter, but it's probably measured from nose to tail along the longitudinal axis. The 1486 inch figure likely references a measurement from the nose to end of the fuselage boat-tail area. It looks like they're adding an extra segment to the payload bay, and that should be much longer than 20 inches.

I really question if the "advanced orbiter" proposal was serious. Seeing as how the shuttle was designed to carry payloads bigger than the "national assets" on the drawing boards during the early 70's, it would seem to have sufficient payload volume.

At the same time, I recall reading John Young's ideas for an "advanced orbiter." He wanted features like thrust termination on the SRB's and canards on the orbiter for better control on approach & landing. The former idea is idiotic, as thrust termination (blowing the nose caps) would likely rupture the ET and kill the crew. Canards aren't such a bad idea, but it's not easy to see how you could stow them for re-entry without adding a lot of mass.
 
CFE said:
At the same time, I recall reading John Young's ideas for an "advanced orbiter." He wanted features like thrust termination on the SRB's and canards on the orbiter for better control on approach & landing. The former idea is idiotic, as thrust termination (blowing the nose caps) would likely rupture the ET and kill the crew. Canards aren't such a bad idea, but it's not easy to see how you could stow them for re-entry without adding a lot of mass.

there were other crazy "Ideas" would likely rupture the ET:

like put SRB segments or a Titan-II stage under the ET as "add-on Booster"
LBM 4 Titan-II tanks with total 159t fuel and 2xAerojet LR87-AJ-11 engine with total 200 ton trust
total weight 180t LBM ignition 5 sec after Shuttle liftoff
+5 tons payload for USAF mission (from Vandenberg AFB?)

another was to build Additional fueltanks inside payloadbay for the Orbital Maneuvering System

source: German space book
"Die Grenzenlose Dimension der Raumfahrt: Band 1"
by Harry o. Ruppe, publish 1980 ISBN 3430178847

page 647 - 640
 
CFE said:
What kind of engines are specified for the liquid-fueled boosters on the shuttle-derived vehicle?

Mark Wade's site has a drawing of the shuttle with similar LRB's (four engines per booster and shutters to protect the engines during splashdown.) But his drawing is from a later study that utilizes STME's.

in most LRB study have 4xSSME for 2 reasion
1- the SSME was the only High trust engine NASA hab in Time
2- the Shuttle launch profil need Variable Thrust, otherwise it will ripp the wings off
Again the SSME was only engine that can do this.
 
Flight global also has something (around 1980 or so) about adding small strapons to the usual SRBs.

This was intented to achieve USAF requirement to Polar orbit (shuttle payload was aparently too weak for them)

http://www.flightglobal.com/pdfarchive/view/1978/1978%20-%202302.html?search=SRBs
 
OK,

Ares I & V are in the public eye a lot lately. And now we have the DIRECT guys making their pitch to Obama. Here's the PM article and a link to their homepage:

http://www.origin.popularmechanics.com/science/air_space/4298615.html

http://www.directlauncher.com/

I do get a kick on how the media seems to impart concepts like Ares and DIRECT the feel of being new or somehow groundbreaking. But the concept of Shuttle-derived boosters are actually old hat. I have hazy, old memories from the very back of my mind about this. These memories come from around the time right after Challenger. I was about 9 or 10 at the time.

I vaguely recall reading something when I was a kid about a booster derived from a single SRB. I also hazily recall a picture of two SRB's stacked on the pad without an ET or Orbiter. I don't recall how that was related to the SRB concept, if it was. And I don't remember what magazine or book this was in.

So I did a Google search and I found references to a concept called SRB-X. From Global Security- http://www.globalsecurity.org/space/systems/srb-x.htm

Then there's this. If you scroll down to the bottom of page 3, you'll see it:
https://mira.hq.nasa.gov/history/ws/hdmshrc/all/main/Blob/41010.pdf;jsessionid=2832AA0615A0BDF37CDE11DA5BAE543C?m=12&order=SERIES

Also found this: http://www.flightglobal.com/articles/2007/07/06/215384/spaceflight-picture-of-the-week-6-july-2007.html

But none of the images I've found match what I recall. I'm sure what I saw was a single booster.

So if anybody else remembers something about this, I'd love to hear about it.

Moonbat

PS- I'm still not sure what the stacked pair of SRB's has to with all this. Maybe that was some kind of fit-test. But the memory of that, along with SRB-X, come from around the same time.
 

Attachments

  • SRB-X.jpg
    SRB-X.jpg
    37.2 KB · Views: 816
Here's a little something on Shuttle-derived concepts I found on my quest for SRB-X.

http://chapters.nss.org/ny/nyc/Shuttle-Derived%20Vehicles%20Modified.pdf

Nice read.

Moonbat
 

Similar threads

Back
Top Bottom