Shadow on The Wall - Work in Progress by Jozef Gatial

I used mapped picture on global sphere in PovRay. But when you fly over the clouds it is better solution layer of 3D clouds. Attached CL-400's video I will try in future rebuild due to missed clouds and real atmosphere. Problem was probably in non real size of CL-400 models. I'm learning
 
on drawings of Fairchild Republic F-15 ( FX) on inner side of engines it is detail not visible on models of it. Do you have more infos?
 

Attachments

  • fairchildf-15_question.jpg
    fairchildf-15_question.jpg
    447 KB · Views: 721
  • fairchildf-15_modelling.jpg
    fairchildf-15_modelling.jpg
    134.8 KB · Views: 655
Cool! We definitely need to see more renderings of the Republic FX submission.
 
Aesthetically speaking there's something a bit sukhoi about it. Maybe how the Flanker might have turned out as a super-Flagon.

Great mideling skills
 
PlanesPictures said:
on drawings of Fairchild Republic F-15 ( FX) on inner side of engines it is detail not visible on models of it. Do you have more infos?
Click to expand...


Could possibly be some kind of sensors? Guns? Cooling intakes? Not sure we can resolve without new drawings.
 
PlanesPictures said:
Time left: 244 hours
Click to expand...


These clouds are 3D ? Looks good !
But 244 hours !! Wow…
Dunno what could be that fairing on the Republic FX, Maybe engine accessories box fairing ?
What's strikes me is that the very front of the wing strakes seems to be air intakes.
 
Sundog said:
Cool! We definitely need to see more renderings of the Republic FX submission.
Click to expand...

Totally agree 100%!!!
Love the Fairchild-Republic 'FX' design


Regards
Pioneer
 
PlanesPictures said:
will be on youtube


My first attempt: https://www.youtube.com/watch?v=RWDxxnl0lhw
Click to expand...

Congratulations!!
That's fantastic work and effort!!


Regards
Pioneer
 
small problem with fonts, so again

I'm rendering in background, long time is for me not critical

Clouds are true 3D. It will be visible on animation
 

Attachments

  • Vue rendering.jpg
    Vue rendering.jpg
    112.1 KB · Views: 164
  • A-1 rendering.jpg
    A-1 rendering.jpg
    118.6 KB · Views: 162
Your help needed


Do you have some simple sketch/drawing of Mikoyan 518-55
 

Attachments

  • Mikoyan 518-55.jpg
    Mikoyan 518-55.jpg
    282.8 KB · Views: 282
Hmmm.....I can't find any more.

http://www.testpilot.ru/russia/mikoyan/mig/31/mp/e155m.htm
Auto translation
Another project, "product-55 518", rather like a future realizovannyjMiG-31. The plane was to carry four missiles r-33 under the fuselage, had a two-wheeled cart main landing gear with tandem wheel arrangement. Keystone wing was supposed to perform with big root Burl and turned the back edge. Work on the "product-518 55" not advanced beyond the schematic design.
 

Attachments

  • i518-55.jpg
    i518-55.jpg
    37.1 KB · Views: 980
Thank you very much. I have some infos that this plane was planned as russian navy version, too.
 
Hmmm......Convair or Vought high speed turbojet/ramjet recon? Fish alternative design?
 
Ummm......... :(
 

Attachments

  • 無題.png
    無題.png
    11.5 KB · Views: 891
NICE! That design makes me think of the "parasol" wings that were looked at at one point.
 
It is eight years what our friend elider ask me to create model and some pictures of Convair Kingfish and he sponsored it, too. Now I started work on 3D printed model of Kingfish and when it will be closed I would like send it to elider because he wasn't very satisfied with his two scratchbuilds. Can you pls help me with contact on elider?
 

Attachments

  • Kingfish_3d_print.jpg
    Kingfish_3d_print.jpg
    192.8 KB · Views: 538
after experiences on more 3D printers prefered thickeness for models in scale 1/72 is 1 mm, min. thickeness of sharp edges is 0.3 mm. For scale 1/48 I rescale 3D model 1.5x. Thickeness of parts is 1.5 mm but on non critical parts I take from material to 1 mm.
 
Small progress
 

Attachments

  • complicated design2.jpg
    complicated design2.jpg
    237.5 KB · Views: 724
  • complicated design3.jpg
    complicated design3.jpg
    150.4 KB · Views: 696
and ready to 3D printing
 

Attachments

  • Kingfish 3D printing_01.jpg
    Kingfish 3D printing_01.jpg
    193.7 KB · Views: 559
  • Kingfish 3D printing_02.jpg
    Kingfish 3D printing_02.jpg
    188.7 KB · Views: 160
Niiice ! :)
Btw, just found this thread:
http://www.secretprojects.co.uk/forum/index.php/topic,1659.0.html
Beautiful too! like a lot the Braniff colors...
 

Similar threads

Back
Top Bottom